All EMF Products
|
| |
Product |
Price |
View |
|
QLink Classic Pendant
Buy now and get the WaveShield 2000 Gold FREE!!
Beware of imitators. These are guaranteed to be the original Brand name Qlink product you trust!
What takes strokes off golf games, gives athletes a competitive advantage, and relieves stress from EMF (electromagnetic fields)? According to the people who wear them, it’s the QLink Pendants with Sympathetic Resonance Technology™ (SRT™). They also report that these personal life-enhancing products help them be more energized, focused and balanced.
Both alternative and traditional doctors have tested the QLink Pendants and report that they neutralize the EMF stress effects from computers, cell phones and other electronic devices.
Athletes say that the QLink Pendants keeps them in that centered state called "The Zone". Runners say wearing a QLink Pendant increases their endurance and gives them a competitive edge.
As the complexity and stresses of modern life increase, the QLink Pendants are fast becoming the product of choice for those people who value performance and optimal well-being.
All you have to do to experience these benefits is to wear one.
The QLink Classic Pendant is durable and waterproof, requiring no batteries and no maintenance. Light-weight, bio-compatible black acrylic, 1.5" across and diamond shaped.
We know how well the Q Link pendants work and guarantee they will protect you from EMF
and allow you to be more centered and balanced and you have a money back guarantee for
90 days.
"Returns: When returning this product it must be accompanied with all its packaging and related paperwork to receive a refund" |
79.95 |
View |
|
Q-Link Silver Pebble Pendant
Free Shipping on this Item!**USA 48 States only |
349.95 |
View |
|
Aulterra's Cell Phone Neutralizer Tri-Pack
The Cell Phone Controversy - Demonstrating Detrimental Effects of Cell Phone Radiation | The Ability of Aulterra's Neutralizer to Reverse the Harmful Effects of Electromagnetic Fields Generated from Cell Phones on Human DNA | Cell Phone Radiation Induced Changes in Human DNA are Attenuated by the Aulterra Neutralizer | The Aulterra Neutralizer reduced the intensity of cell phone radiation
Buy 3 and get Free Shipping!
Benefits of Aulterra Neutralizer
In a June 2006 by Dr. Rein, cell phone radiation was measured without the Aulterra Neutralizer and with the neutralizer. The main peak in radiation was reduced by half with the use of the Neutralizer while smaller peaks caused by transmissions over the open line were eliminated.
The Aulterra Neutralizer works on other EMF radiating devices too!
Use the Aulterra Neutralizer on the following electronic devices for added protection:
Computer terminal
Microwave
Cordless telephone
Television
Video Game Equipment
Studies Prove Cell Pone Radiation Causes Damage to DNA
The latest studies confirm what the cellular phone manufacturers do not want you to know:
Casual use of a cell phone can damage the DNA in sensitive areas on your brain
Levels at which damage occurs can be as low as 0.024-0.0024 W/kg - much lower than any cell phone.
Using an ear-piece will not keep you safe from EMF exposure. Ear pieces act as "conduits" to funnel harmful radiation to your brain
DNA damage from EMF exposure is cumulative, increasing your risk each time you use your phone
A landmark study by Dr. Henry Lai of the University of Washington showed that even at low levels, exposure to EMF/RF caused DNA damage to brain cells of rats, resulting in loss of short and long-term memory and slower learning.
A study at Penn State University concluded that effect for the "first few minutes... then a cascade of microbial destruction occurs.
The Aulterra Neutralizer is the only product on the market with invitro studies that prove human DNA can be protected from the damaging effects of EMF/RF.
"It turns out that a call lasting just two minutes can open the 'blood-brain barrier' in kids as well as adults, allowing toxins in the bloodstream to cross this blood vessel gateway into the skull and attack brain cells. The same two-minute cell phone exposure also disrupts the natural electrical activity of a child's brain for up to an hour afterwards." - Thomas, William, "Cell Phones Hurt Children Even Worse than Adults", Convergence Weekly, July 2003.
The Aulterra Neutralizer is the only product that NEUTRALIZES harmful effects of EMF/RF exposure
Man-made electromagnetic and radio frequencies (EMFs/RFs) produce chaotic energy of a different frequency than natural EMFs.
Man-made EMFs can disrupt or distort organic energy patterns.
Artificial EMFs may be hazardous, may distort human energy patterns, may cause cancer or present other grave dangers to human health.
The Aulterra Neutralizer is a proprietary blend of activated paramagnetic and diamagnetic elements which neutralize the effect of man-mad EMF exposure on human DNA.
Noted DNA researcher Dr. Glen Rein of Quantum Biological Lab, recently completed a study in which he concluded: "...the natural coherent energy emanating from the Aulterra Neutralizer mitigated the incoherent energy from the man-mad EMF, rendering it harmless to human DNA."
The Aulterra Neutralizer will not interfere with the functioning of your cell phone.
Unlike other EMF blocking devices, the Aulterra Neutralizer will not affect cellular phone reception or transmission. Your phone will still transmit properly - but it will no longer be hazardous to your DNA and your health.
Three Micro-thin layers of rare activated earth elements product our thinnest, most effective Neutralizer ever.
The Aulterra Neutralizer will work on any cellular phone
The Aulterra Neutralizer is effective against harmful EMF/RF radiation with any style of cellular phone:
Any antenna style
Any brand or model
Digital, analog or dual mode phones
New models as well as older styles
The Aulterra Neutralizer is convenient and easy to use
There is no complicated installation procedure with the Aulterra Neutralizer. Just peel the backing from the disc, and apply it to any flat, smooth surface on your cellular phone or other electronic device. The adhesive will stick to almost any surface, providing constant protection for as long as it remains on the device. |
24.95 |
View |
|
Q-Link Gold Pebble Pendant
Free Shipping on this Item!**USA 48 States only
Get a New Q-Link Pendant ($129 value) free of charge when you purchase the Qlink Gold Pebble Pendant
Beware of imitators. These are guaranteed to be the original Brand name Qlink product you trust!
The Q-Link SRT-3 Gold Pebble Pendant is stunningly beautiful and it's name conjures images of the breathtaking Pebble Beach Course. Featuring a vibrant 14K solid gold assymetrical casing, the Gold Pebble combines absolute luxury with the uppermost functionality of SRT-3 Programming.
Both alternative and traditional doctors have tested the QLink Pendants and report that they neutralize the EMF stress effects from computers, cell phones and other electronic devices.
Athletes say that the QLink Pendants keeps them in that centered state called "The Zone". Runners say wearing a QLink Pendant increases their endurance and gives them a competitive edge.
As the complexity and stresses of modern life increase, the QLink Pendants are fast becoming the product of choice for those people who value performance and optimal well-being.
All you have to do to experience these benefits is to wear one.
Crafted of 14K Gold
90 day money back guarantee
"Returns: When returning this product it must be accompanied with all its packaging and related paperwork to receive a refund" |
999.00 |
View |
|
|
79.95 |
View |
|
|
59.95 |
View |
|
|
49.95 |
View |
|
|
59.95 |
View |
|
EM-X Cellular Seal
The EM made seal has the property of affecting electromagnetic fields from electronic components such as cell phones, computers, radios and TVs. The seal, though passive, can diminish the harmful effects of such wave fields.
Suggested Use: Place the seal on or near the site of radiation emission. For example, near the screen of your computer monitor, or on the battery area of your cellphone.
Ingredients: Laminated paper, EM-X ceramic powder, adheasive seal.
Ten highest-radiation cell phones (U.S.)
All cell phones leak and even if you don't have one of the worst offenders, you should protect yourself and your loved ones by using these EMF cell phone protectors |
15.95 |
View |
|
|
30.75 |
View |
|
WaveShield 1000 Slim
Cell Phones and Remote Viewers | More Information on Wave Shield
These work the best, as we have tested them, and we therefore regard them as our - BEST UNIT!!
As cell phones become smaller the listening area has gotten smaller on many new phones with a thin listening bar near the top of the phone. The new thin rectangular design covers that narrow area and provides the same protection without bending over the edge or interfering with the closing of a few flip top phones.
The majority of EM radiation emitted by cellular and cordless phones comes from the antenna and parts of the phone other than the earpiece and the WaveShield products have no significant effect on this other EM radiation.
The WaveShield 1000 features
a soft comfort cushion design, about the size of a penny that adheres to the ear
piece of any cellular phone and acts as a cellular protection system.
Fits all phone styles
Attaches in seconds
Soft/comfort cushion
Will not affect reception
The vast majority of electromagnetic
radiation emitted by cellular and cordless phones comes from the antenna and
parts of the phone other than the ear piece. Wave shield products have no effect
on this electromagnetic energy. They may reduce the strength of electromagnetic-field
emissions from cell phone ear pieces by as much as 50-97% depending on the cell
phone model.
WaveShield Q.&A.
1. I heared the radiation comes from the antenna.
Correct; When you make or receive a call radiation comes off the antenna, half of which goes off into space, the other half forms a band around your head. We do not block the radiation from the antenna or what circulates through the phone . Our focus is on that portion that enters the soft tissue of the ear through the ear piece.
Why?
Because the ear has the highest absorption rate of radiation in the body and most of the reports of tumors are right behind the ear, not the chin, forehead or other ear, thus our focus and testing on radiation entering into the ear.
How was your shield tested? or how do I know your shield works?
It was tested by a US. Govt. FCC listed lab on several phone models and we received the following results. Our WS silver series 1000/3000 blocks 50-97% of the radiation coming through the ear piece of the phone depending on the model of phone, and our series 2000 Gold blocks from 50-99% of that portion of the radiation coming through the ear piece.
There are other shields selling for less money.
True. Most of these have no testing, vague testing , no testing on phones from an approved lab. We call these shields "phone decorations" they offer no protection to you and your family. Waveshield has been proven and tested to do what we claim.
I have not heared anything about phones not being safe.
Although the jury is still out on the long term effects of cell phone use, studies and evidence continue to support the growing potential health risk. An independent reporting site cprnews.com has over 100 reports and studies on cell phone dangers.
Why has the govt. not done something?
The govt. listens to the cell phone mfgs. who tell them phones are safe and shields do not work. Yet a report from 2 major newspapers stated that the mfgs. have a patent to put a shield in phones. Now why would they do that if phones were safe and shields did not work?
They have not done it because of potential law suits from lying to the public.
Is there a Warranty ?
Yes, one year which is only voided if you try and remove the Waveshield from one phone to put on another phone. The adhesive could rip off and the special surface coating could get damaged.
What if it falls off my phone can I return it for a new one?
Yes of course but if you follow the instructions in the package for applying the Waveshield you should have no problem with it falling off.
I use a headset so why do I need a shield.?
Well first we want you protected when you are not using your headset say in a restaurant but mainly because current headsets with the wire from the ear bud are much more dangerous. Studies and research have proven that the wire from the ear bud acts like an aerial bringing 3 x more radiation to the users head--they are very dangerous, that`s the bad news. The good news is that we have replaced the wire to the ear with a tubular system, like a doctors stethoscope or when listening to a movie on an airplane--only air and sound travels to the head--NO RADIATION
I have not heared anything to make me concerned about cell phones being dangerous.
Let me ask you 3 questions:
Do you now believe nicotine is non addictive?
Do you now believe cigarette smoking does not cause lung C?
Do the words "microwave" and "radiation" sound like things you want going into your brain?
The jury is still out on the long term effects of cell phone radiation meanwhile we offer proven and tested products that REDUCE THE POTENTIAL HEALTH RISK--- WHY TAKE A CHANCE?
Waveshield: Note from President of Interact Communications
We produce and sell anti-radiation products for cellular and mobile phones world wide .
Although there is no absolute proof that cell phone cause C and other related health problems, the evidence is mounting in spite of the cell phone manufacturers insistence that cell phones are safe and radiation exposure is minimal. An independent web site, cprnews.com has reports and studies from around the world that indicates just the opposite, that cell phones are indeed potentially dangerous to ones health.
Wave Shield was developed in response to the growing concern about cell phone safety. It is currently sold in over 35 countries and has become the premier product in the field of radiation protection.
The extensive testing on phones in a USA govt. listed FCC lab CERTIFIES that the Wave Shield blocks from 50- to 99% of the RADIATION from entering the inner ear when the phone is placed against the ear (series 2000 Gold) We make no claims to block all the radiation off the antenna , half of which goes into space. Our focus is only on that portion that enters through the ear piece of the phone directly into the soft tissue of the inner ear. Why? First , the highest absorption rate of radiation in the body is in the ear. Second, all the reports of tumors have been behind the ear. Thus our focus on that area of the body.
As well we have approval from Cetecom, Germany, the highest testing authority in Europe, who having tested our product has issued us a Letter of Conformity allowing us to use the CE logo on our packaging for the European community. This tells the consumer that our product is safe and effective. In addition we offer each distributor world wide a minimum of $1,000,000 Liability insurance at no cost, insurance we could not obtain if our product did not work.
There are many cheaper devices on the market, but absent FCC govt. registered certification and a high level of product liability from a reputable insurance company, they can be viewed as little more than phone decorations.
In our on going efforts to protect consumers, we are now introducing the first radiation free hands free kits which protect phone users from radiation and also comply with government hands free driving regulations now being passed state by state to reduce automobile accidents.
Studies on current hands free kits, as reported on cprnews.com, show that the wire between the ear bud and microphone acts as an antenna and increases the radiation to the users head by up to 300%. We have replaced the wire with a tubular system that conducts only air and sound, much like the head phones used on a plane to listen to a movie. We have eliminated the radiation from reaching the users head.
Ten highest-radiation cell phones (U.S.)
All cell phones leak and even if you don't have one of the worst offenders, you should protect yourself and your loved ones by using these EMF cell phone protectors
The majority of EM radiation emitted by cellular and cordless phones comes from the antenna and parts of the phone other than the earpiece and the WaveShield products have no significant effect on this other EM radiation.
These work the best, as we have tested them, and we therefore regard them as our - BEST UNIT!!
Cell Phones and Remote Viewers | More Information on Wave Shield |
19.95 |
View |
|
WaveShield 3000 for Cordless phones
Cell Phones and Remote Viewers | More Information on Wave Shield
These work the best, as we have tested them, and we therefore regard them as our - BEST UNIT!!
The majority of EM radiation emitted by cellular and cordless phones comes from the antenna and parts of the phone other than the earpiece and the WaveShield products have no significant effect on this other EM radiation.
WaveShield? 3000 Series.
New for Cordless Phones 900 MHz or more!
This compact display holds 36 pieces and features contemporary professional graphics.
The package is designed to present the product on a cordless phone. Our 3000 series
counter merchandiser is beautifully designed with a dynamic header card and is
perfectly at home on any counter top or gives you the option to peg the packages
as open stock. Protect your family from harmful electromagnetic radiation. Exclusively
from WaveShield.
Dynamic Attractive
Packaging
Proven & Tested
Fits Any Cordless
Phone
Comfort Design
Will Not Affect
Reception
Attaches in Seconds
Perfect Unisex
Gift Solution
The vast majority of electromagnetic
radiation emitted by cellular and cordless phones comes from the antenna and
parts of the phone other than the ear piece. Wave shield products have no effect
on this electromagnetic energy. They may reduce the strength of electromagnetic-field
emissions from cell phone ear pieces by as much as 50-97% depending on the cell
phone model
WaveShield Q.&A.
1. I heared the radiation comes from the antenna.
Correct; When you make or receive a call radiation comes off the antenna, half of which goes off into space, the other half forms a band around your head. We do not block the radiation from the antenna or what circulates through the phone . Our focus is on that portion that enters the soft tissue of the ear through the ear piece.
Why?
Because the ear has the highest absorption rate of radiation in the body and most of the reports of tumors are right behind the ear, not the chin, forehead or other ear, thus our focus and testing on radiation entering into the ear.
How was your shield tested? or how do I know your shield works?
It was tested by a US. Govt. FCC listed lab on several phone models and we received the following results. Our WS silver series 1000/3000 blocks 50-97% of the radiation coming through the ear piece of the phone depending on the model of phone, and our series 2000 Gold blocks from 50-99% of that portion of the radiation coming through the ear piece.
There are other shields selling for less money.
True. Most of these have no testing, vague testing , no testing on phones from an approved lab. We call these shields "phone decorations" they offer no protection to you and your family. Waveshield has been proven and tested to do what we claim.
I have not heared anything about phones not being safe.
Although the jury is still out on the long term effects of cell phone use, studies and evidence continue to support the growing potential health risk. An independent reporting site cprnews.com has over 100 reports and studies on cell phone dangers.
Why has the govt. not done something?
The govt. listens to the cell phone mfgs. who tell them phones are safe and shields do not work. Yet a report from 2 major newspapers stated that the mfgs. have a patent to put a shield in phones. Now why would they do that if phones were safe and shields did not work?
They have not done it because of potential law suits from lying to the public.
Is there a Warranty ?
Yes, one year which is only voided if you try and remove the Waveshield from one phone to put on another phone. The adhesive could rip off and the special surface coating could get damaged.
What if it falls off my phone can I return it for a new one?
Yes of course but if you follow the instructions in the package for applying the Waveshield you should have no problem with it falling off.
I use a headset so why do I need a shield.?
Well first we want you protected when you are not using your headset say in a restaurant but mainly because current headsets with the wire from the ear bud are much more dangerous. Studies and research have proven that the wire from the ear bud acts like an aerial bringing 3 x more radiation to the users head--they are very dangerous, that`s the bad news. The good news is that we have replaced the wire to the ear with a tubular system, like a doctors stethoscope or when listening to a movie on an airplane--only air and sound travels to the head--NO RADIATION
I have not heared anything to make me concerned about cell phones being dangerous.
Let me ask you 3 questions:
Do you now believe nicotine is non addictive?
Do you now believe cigarette smoking does not cause lung C?
Do the words "microwave" and "radiation" sound like things you want going into your brain?
The jury is still out on the long term effects of cell phone radiation meanwhile we offer proven and tested products that REDUCE THE POTENTIAL HEALTH RISK--- WHY TAKE A CHANCE?
Waveshield: Note from President of Interact Communications
We produce and sell anti-radiation products for cellular and mobile phones world wide .
Although there is no absolute proof that cell phone cause C and other related health problems, the evidence is mounting in spite of the cell phone manufacturers insistence that cell phones are safe and radiation exposure is minimal. An independent web site, cprnews.com has reports and studies from around the world that indicates just the opposite, that cell phones are indeed potentially dangerous to ones health.
Wave Shield was developed in response to the growing concern about cell phone safety. It is currently sold in over 35 countries and has become the premier product in the field of radiation protection.
The extensive testing on phones in a USA govt. listed FCC lab CERTIFIES that the Wave Shield blocks from 50- to 99% of the RADIATION from entering the inner ear when the phone is placed against the ear (series 2000 Gold) We make no claims to block all the radiation off the antenna , half of which goes into space. Our focus is only on that portion that enters through the ear piece of the phone directly into the soft tissue of the inner ear. Why? First , the highest absorption rate of radiation in the body is in the ear. Second, all the reports of tumors have been behind the ear. Thus our focus on that area of the body.
As well we have approval from Cetecom, Germany, the highest testing authority in Europe, who having tested our product has issued us a Letter of Conformity allowing us to use the CE logo on our packaging for the European community. This tells the consumer that our product is safe and effective. In addition we offer each distributor world wide a minimum of $1,000,000 Liability insurance at no cost, insurance we could not obtain if our product did not work.
There are many cheaper devices on the market, but absent FCC govt. registered certification and a high level of product liability from a reputable insurance company, they can be viewed as little more than phone decorations.
In our on going efforts to protect consumers, we are now introducing the first radiation free hands free kits which protect phone users from radiation and also comply with government hands free driving regulations now being passed state by state to reduce automobile accidents.
Studies on current hands free kits, as reported on cprnews.com, show that the wire between the ear bud and microphone acts as an antenna and increases the radiation to the users head by up to 300%. We have replaced the wire with a tubular system that conducts only air and sound, much like the head phones used on a plane to listen to a movie. We have eliminated the radiation from reaching the users head.
Ten highest-radiation cell phones (U.S.)
All cell phones leak and even if you don't have one of the worst offenders, you should protect yourself and your loved ones by using these EMF cell phone protectors
These work the best, as we have tested them, and we therefore regard them as our - BEST UNIT!!
The majority of EM radiation emitted by cellular and cordless phones comes from the antenna and parts of the phone other than the earpiece and the WaveShield products have no significant effect on this other EM radiation.
Cell Phones and Remote Viewers | More Information on Wave Shield |
19.95 |
View |
|
WaveShield 2000 GOLD
Cell Phones and Remote Viewers | More Information on Wave Shield
These work the best, as we have tested them, and we therefore regard them as our - BEST UNIT!!
The majority of EM radiation emitted by cellular and cordless phones comes from the antenna and parts of the phone other than the earpiece and the WaveShield products have no significant effect on this other EM radiation.
STOP
THE WAVE WITH PURE GOLD!
The WaveShield GOLD cellular
protection system features a "pure-gold" design, about the size of
a penny that adheres to the ear piece of any cellular phone.
The WaveShield GOLD design presents itself as elegantly as a designer watch or executive pen & pencil set.
Fits all phone styles
Attaches in seconds
Soft comfort cushion
Will not affect reception
The vast majority of electromagnetic
radiation emitted by cellular and cordless phones comes from the antenna and
parts of the phone other than the ear piece. Wave shield products have no effect
on this electromagnetic energy. They may reduce the strength of electromagnetic-field
emissions from cell phone ear pieces by as much as 50-99% depending on the cell
phone model
WaveShield Q.&A.
1. I heared the radiation comes from the antenna.
Correct; When you make or receive a call radiation comes off the antenna, half of which goes off into space, the other half forms a band around your head. We do not block the radiation from the antenna or what circulates through the phone . Our focus is on that portion that enters the soft tissue of the ear through the ear piece.
Why?
Because the ear has the highest absorption rate of radiation in the body and most of the reports of tumors are right behind the ear, not the chin, forehead or other ear, thus our focus and testing on radiation entering into the ear.
How was your shield tested? or how do I know your shield works?
It was tested by a US. Govt. FCC listed lab on several phone models and we received the following results. Our WS silver series 1000/3000 blocks 50-97% of the radiation coming through the ear piece of the phone depending on the model of phone, and our series 2000 Gold blocks from 50-99% of that portion of the radiation coming through the ear piece.
There are other shields selling for less money.
True. Most of these have no testing, vague testing , no testing on phones from an approved lab. We call these shields "phone decorations" they offer no protection to you and your family. Waveshield has been proven and tested to do what we claim.
I have not heared anything about phones not being safe.
Although the jury is still out on the long term effects of cell phone use, studies and evidence continue to support the growing potential health risk. An independent reporting site cprnews.com has over 100 reports and studies on cell phone dangers.
Why has the govt. not done something?
The govt. listens to the cell phone mfgs. who tell them phones are safe and shields do not work. Yet a report from 2 major newspapers stated that the mfgs. have a patent to put a shield in phones. Now why would they do that if phones were safe and shields did not work?
They have not done it because of potential law suits from lying to the public.
Is there a Warranty ?
Yes, one year which is only voided if you try and remove the Waveshield from one phone to put on another phone. The adhesive could rip off and the special surface coating could get damaged.
What if it falls off my phone can I return it for a new one?
Yes of course but if you follow the instructions in the package for applying the Waveshield you should have no problem with it falling off.
I use a headset so why do I need a shield.?
Well first we want you protected when you are not using your headset say in a restaurant but mainly because current headsets with the wire from the ear bud are much more dangerous. Studies and research have proven that the wire from the ear bud acts like an aerial bringing 3 x more radiation to the users head--they are very dangerous, that`s the bad news. The good news is that we have replaced the wire to the ear with a tubular system, like a doctors stethoscope or when listening to a movie on an airplane--only air and sound travels to the head--NO RADIATION
I have not heared anything to make me concerned about cell phones being dangerous.
Let me ask you 3 questions:
Do you now believe nicotine is non addictive?
Do you now believe cigarette smoking does not cause lung C?
Do the words "microwave" and "radiation" sound like things you want going into your brain?
The jury is still out on the long term effects of cell phone radiation meanwhile we offer proven and tested products that REDUCE THE POTENTIAL HEALTH RISK--- WHY TAKE A CHANCE?
Waveshield: Note from President of Interact Communications
We produce and sell anti-radiation products for cellular and mobile phones world wide .
Although there is no absolute proof that cell phone cause C and other related health problems, the evidence is mounting in spite of the cell phone manufacturers insistence that cell phones are safe and radiation exposure is minimal. An independent web site, cprnews.com has reports and studies from around the world that indicates just the opposite, that cell phones are indeed potentially dangerous to ones health.
Wave Shield was developed in response to the growing concern about cell phone safety. It is currently sold in over 35 countries and has become the premier product in the field of radiation protection.
The extensive testing on phones in a USA govt. listed FCC lab CERTIFIES that the Wave Shield blocks from 50- to 99% of the RADIATION from entering the inner ear when the phone is placed against the ear (series 2000 Gold) We make no claims to block all the radiation off the antenna , half of which goes into space. Our focus is only on that portion that enters through the ear piece of the phone directly into the soft tissue of the inner ear. Why? First , the highest absorption rate of radiation in the body is in the ear. Second, all the reports of tumors have been behind the ear. Thus our focus on that area of the body.
As well we have approval from Cetecom, Germany, the highest testing authority in Europe, who having tested our product has issued us a Letter of Conformity allowing us to use the CE logo on our packaging for the European community. This tells the consumer that our product is safe and effective. In addition we offer each distributor world wide a minimum of $1,000,000 Liability insurance at no cost, insurance we could not obtain if our product did not work.
There are many cheaper devices on the market, but absent FCC govt. registered certification and a high level of product liability from a reputable insurance company, they can be viewed as little more than phone decorations.
In our on going efforts to protect consumers, we are now introducing the first radiation free hands free kits which protect phone users from radiation and also comply with government hands free driving regulations now being passed state by state to reduce automobile accidents.
Studies on current hands free kits, as reported on cprnews.com, show that the wire between the ear bud and microphone acts as an antenna and increases the radiation to the users head by up to 300%. We have replaced the wire with a tubular system that conducts only air and sound, much like the head phones used on a plane to listen to a movie. We have eliminated the radiation from reaching the users head.
Ten highest-radiation cell phones (U.S.)
All cell phones leak and even if you don't have one of the worst offenders, you should protect yourself and your loved ones by using these EMF cell phone protectors
These work the best, as we have tested them, and we therefore regard them as our - BEST UNIT!!
The majority of EM radiation emitted by cellular and cordless phones comes from the antenna and parts of the phone other than the earpiece and the WaveShield products have no significant effect on this other EM radiation.
Cell Phones and Remote Viewers | More Information on Wave Shield |
24.95 |
View |
|
Q-Link White
Get a pair of magnetic insoles ($30 value) OR a WaveShield 2000 Gold for FREE when you purchase the New QLink
SPECIAL: Buy now and get Free Shipping
Beware of imitators. These are guaranteed to be the original Brand name Qlink product you trust!
CLARUS TECHNOLOGY
The Q-Link's fundamental technology can be understood by imagining a tuning fork that vibrates at a certain pitch. Similarly, the Q-Link's Sympathetic Resonant Technology? (SRT?) is tuned to optimize the human energy system through resonance. As it interacts with your biofield, it leads to a rebalancing and restoration according to your individual needs.
SRT has proven its effectiveness in a wide range of experiments, including trials at UC Irvine, University of Vienna, and Imperial College London, all of which demonstrated significant effects on living systems. Research highlights:
Doctors who tested the Q-Link found that it instantaneously amplified healthy energy states and decreased energy drains caused by a wide variety of stressors.
In brainwave studies (EEG), the Q-Link reduced the harmful effects of EMFs ? the fields around computers, cell phones and other devices.
World-class athletes reported that the Q-Link improved their mental focus and endurance, giving them a significant competitive edge.
In live blood studies, the Q-Link led to greater cellular integrity and more efficient blood oxygenation.
The new Q-link features next-generation SRT 3, which enables the device to more efficiently resonate life-supporting frequencies in the biofield and activate a more powerful response to stress. Most people will notice heightened energy, quicker effects, and a more rapid return to centered emotional balance.
?My intuition and logic suggest that Clarus type products will be an important part of humanity's future.?
William Tiller, Ph.D. Professor Emeritus, Stanford University and Guggenheim Fellow, USA
We are also exploring new potential SRT applications, such as enhancing water, increasing agricultural yields and refining chemical manufacturing processes.
We know how well the Q Link pendants work and guarantee they will protect you from EMF
and allow you to be more centered and balanced and you have a money back guarantee for
90 days.
"Returns: Q Link products are very effective and we get under a 1% return. If you return your product, it must be accompanied by the free gift (unopened) in unused condition or there will be a $15 charge. It must be accompanied with all its packaging and related paperwork to receive a refund "
SPECIAL: Buy now and get Free Shipping.
" The New QLink will ship in approximately 7 days"
Remember to select the Shipping option 'Free Shipping' in the checkout area or you will not receive Free Shipping for this product. |
99.95 |
View |
|
CELLSENSOR
The World's First Meter to Address the Health Issues Associated with the Cellular Phone and EMF Power Line Controversies.
Cellular Phone Meter and Gaussmeter All in One. For Household use, not for continuous commercial use
Dual use meter featuring both cell phone frequency RF measurement as well as a single axis ELF gaussmeter... at an amazing low price! Calibrated at 835 MHz (with an accuracy of ?3dB), the RF meter measures the intensity of radiation from analog cellular phones and other 900 MHz sources. Two analog scales: HIGH sensitivity 0-1 mW/cm?, and NORMAL sensitivity 0-10 mW/cm?.
Gaussmeter feature is calibrated around 50/60 Hz and also offers 2 scales: 0-5 and 0-50 mG. Remote probe with 2 foot extension cord allows user great flexibility and reach. Both RF and gaussmeter provide audio sound and large flashing light which corresponds to field strength.
Includes complete documentation on how to conduct proper measurements, guide to emissions standards, and methods to reduce unnecessary exposure. Patented & CE compliant. 30-day mfr. warrantee. This is not our most accurate meter (in fact, we have found that it usually does not zero properly), but at this price it makes a great tool for simple surveys, school projects, and many tool box applications.
Simple to use! Move beds away from high fields!
10 to 20% of all homes are covered in "hot spots" of electromagnetic fields over 2 milligauss. With the CellSensor, one can walk the house and in 5 minutes find these hot spots that measure over 2 and avoid placing beds and furniture there. Simple to use, the meter shows the hot spots with needle, light and sound! The meter is normally quiet...showing 0 reading. When you walk by a hot spot, the needle goes up over 2, the light glows, the sound beeps!
Without the meter, it is impossible to know where the hot spots are! A hot spot could be created by sleeping with a TV on the other side of the wall, or by faulty wiring, typical after renovation projects, or by proximity to visible or hidden underground powerlines!
While the reason for the creation of hot spots can be simple or complex, avoiding the hot spots is always very simple. Most hot spots are small, so moving a bed or furniture just a couple of feet usually does the trick! Most hot spots are dealt with that way, just avoid placing furniture there by moving it a little bit!
Simply plug the included probe into the meter, turn it on, place the setting on H for high sensitivity, and the meter needle now is reading 0 to 5 in its display. Readings over 2 are high. Those are the hot spots to avoid. In this same way the meter shows safe distances from appliances such as TVs and microwaves!
Since 10 to 20% of all homes have hot spots, it is important to spend 5 minutes checking the home! It is simple and one gets a great feeling of accomplishment when one move's a child's pillow away from a hot spot!
Here is what Time Magazine wrote about electromagnetic fields:
Time Magazine writes: "Those exposed to fields of 2 milligauss showed a threefold increase in their risk, while children exposed to 3 milligauss showed a fourfold increase in the risk of leukemia. Such as clear progression makes it difficult to argue that factors other than exposure to the electromagnetic field were responsible for the extra cases of leukemia."
Time Magazine writes: the research "...shows an unmistakable correlation between the degree of exposure and the risk of childhood leukemia." The second study "...linked on-the-job exposure to electromagnetic fields and leukemia in workingmen." "What makes the Karolinska study particularly significant is the thoroughness of its design. The investigation encompassed nearly 500,000 people." "One of the most telling results was that the C risk grew in proportion to the strenght of the electromagnetic field. Children with constant exposure to the weakest fields, calculated at less than 1 milligauss (about the same that a coffee maker generates when it is brewing), had the lowest incidence of C." "Numerous reports in the popular press have blared out warnings." "...a growing number of scientific studies suggest that the risk of leukemia and other malignancies rises with exposure to electromagnetic fields."
Time Magazine, October 26th, 1992. Radiation is linked to C, leukemia, headaches, fatigue, cataracts, miscarriages and birth defects. The US EPA recommends "prudent avoidance." In August of 2001, the International Agency for Research on C unanimously concluded that magnetic fields are carcinogens in the same class as DDT and lead. Scientists from the US, UK and 8 other countries "all agreed," said Dr. Larry Anderson. Magnetic fields were also linked in June of 2001 to a six fold increase in miscarriages, by the Kaiser Permanente's research division.
Learn to Detect and Measure EMF Fields
Can measure Cellular Phone RF Radiation
Also measures Electromagnetic Fields Generated by Power Lines, Computer Monitors, TVs, Appliances, Home Wiring, and Other Unsuspected Sources.
Easy to Use
Web Support Available
Free Booklet on RF/ELF Issues Included
(Includes Guides on How to Reduce Your Exposure) and Exterior Probe
Features
Sound and Visual Signals Combined with Analog Measurement Make for an Ideal Meter.
Audio signal with volume control
Light signal
ISO 9001 controlled manufacturing
Comprehensive documentation backed by web support
Competitively priced
Rugged ABS plastic construction, high quality components
CE registered
Requires one 9-volt alkaline battery
Backed by a no-questions-asked 30-day end user warranty
More Information
The average home in America is 10%-15% covered by radiation hotspots above 2 milligauss. Let's look at some pictures of how America relates to power:
As you can see the whole country is electrified. That is why it is important to check for hotspots in your home.
The first problem with powerlines are high voltage lines.
Another problem with powerlines is that you could have a home location which has a powerline behind or under it... that is why it is important to check.
There are all sorts of powerline configurations.
One solution is to bury the powerlines, but good luck doing so because the cost of burying the lines is 10 times the cost of having them aerial.
How is electricity produced and distributed?
Electricity is produced at power plants using different fuels and generating technologies.
When energy leaves a power plant, it is pushed into the electric system at a substation.
Energy travels over long distances on transmission lines to where the power is needed.
On arrival in your neighborhood, the strength of the electricity is decreased at another substation.
Then, a local line carries the electricity to your home or business where a nearby transformer matches the electricity to the needs of your residence.
In a typical county, powerlines criss-cross in all directions!
Ten highest-rated radiation cell phones (U.S.)
All cell phones leak and even if you don't have one of the worst offenders, you should protect yourself and your loved ones by using these EMF cell phone protectors |
29.77 |
View |
|
MicroAlert Model 2: Radio/Microwave Alarm
Radio/Microwave
Alarm
MicroAlert is an alarm that
you wear like a pager that will alert you to the presence of radiofrequency and
microwave radiation. The MicroAlert is important protection for all pacemaker
users, those sensitive to RF radiation from TV or cell phone broadcasts, or
anyone who lives or works in the presence of microwave or RF hazards. Can even
be used to detect audio and video transmission from concealed bugs or the
unauthorized use of cellular phones!
MicroAlert will respond to
as little as 0.1 ?W/cm? in highest sensitivity mode. When MicroAlert is moved
closer to the source of RF radiation, the chirps will become more frequent, and
will become a solid tone when exposure is high. Responds to frequencies from 500
kHz to 3 GHz, although response is not flat over this range. What this means is
that at any given setting, the threshold will vary with frequency. Note: This is
not a high precision meter. Sensitivity information is only a guideline.
The beeping alarm threshold
can be adjusted from no threshold (constant beeping regardless of radiation
exposure), to to a maximum of about 10 microWatts/cm?. It is intended to be an
alarm for cell phones, cell towers, microwave ovens, surveillance bugs, and most
RF transmitters.
Only 1-5/8" x 2-1/4", the 1
oz. MicroAlert uses one Lithium coin cell #2032 which should last about 3 years
with normal use. Includes convenient belt clip.
MicroAlert - Model 2 Instructions
The MicroAlert Alarm detects
radio and microwaves, causing the device to produce and electronic "chirping"
sound / beep when the field strength detected is higher than a level that you
have adjusted / set the instrument to.
Locate the "power" switch on
the top surface of the device, just above the words "OFF ON". Slide this
recessed switch to the "ON" position. You should hear a single beep / chirp when
this has been done, which indicates the battery is good. The unit is now
working. The small black knob marked SENSITIVITY, which is on the right face of
the box, is normally set at the factory to its center position. Notice the line
that is indented into the small black knob. The "center position" means that
this indented line points toward the arrow next to "NORMAL", which is on the
label of the MicroAlert. If you rotate this knob clockwise, it will increase the
sensitivity.
Counterclockwise rotation of
the knob will decrease the sensitivity. The "center position" represents a
certain sensitivity, though the sensitivity depends to some extent on how the
MicroAlert detection face is positioned. If held up in the air with your fingers
on the lower half of the case, with your fingers beside or below the word
"MicroAlert 2", this "NORMAL" sensitivity is about 5 microwatts / cm2. This is
the strength (or technically, the power density) of the radio / microwaves that
will cause the unit to just begin to beep. The beeps will repeat at about 4 per
second if the average power density is just at this threshold of 5 microwatts /
cm2. If you move to an area where the power density is higher, the beeping will
become more frequent (as frequent as 20 beeps per second). Above about 10
microwatts per cm2, the beeping becomes a solid "always-on" tone.
CALIBRATION
PROCEDURE
If the MicroAlert does not
perform / operate as described above, when set at the two most clockwise
positions shown on the diagram, calibration is necessary.
The MicroAlert should beep
even when it is shielded (by being cupped in your hands), if the knob is set to
the "Maximum clockwise travel" position, however it should not beep when set to
the ".1 (3.5)" position if it?s cupped in your hands.
To calibrate the device,
unscrew the single screw on the backside of the MicroAlert (the small
screwdriver is included with your MicroAlert especially for this procedure).
Rotate the black knob to its most sensitive position, at maximum clockwise
travel. Inside the MicroAlert, you?ll notice a copper rectangle with a hole in
it. This is the antenna. Stick the screwdriver through the hole so you can
rotate the small round control under the hole. Rotate this round control so that
the MicroAlert beeps a few times a second. (This beeping should be heard after
you take out the screwdriver and cup the MicroAlert in your hands.) Then turn
the black knob to the ".1 (3.5)" position shown in the diagram. Now the unit
should not beep when cupped. Of course, it?s easiest to do this test in an area
that seems to already have fairly low radio / microwave signal. That is, an area
where there?s not much difference between the microwave field the MicroAlert
picks up whether you hold it upright or cup it in your hands.
BATTERY
Battery life is typically 3
years if it isn?t beeping more than about 5 minutes a day. If you don?t hear a
beep when you turn it on, replace the battery. Also as the battery voltage
drops, the beep volume will be softer / quieter. The weak battery does not
affect the sensitivity level, but if the beep sound becomes too quiet to be
useful to you, then you should consider replacing the battery.
It uses an inexpensive
lithium "2032" (CR 2032) type 3 volt battery, available from any store / site
which has batteries for sale. To replace it, unscrew the center screw and follow
the directions printed inside the MicroAlert on the green board. You need to
push down on the white plastic round tab (looks like a cul-de-sac) with a few
pounds of force until you hear a click, then the battery will be at a slight
angle. Pry the battery out with the screwdriver. If you accidentally put the new
battery in backward, it will not harm anything, but the unit will not work until
you put the battery in with the "+" side facing up. After sliding the battery
into position, push down on the battery on the side which is sticking up the
most, so that it will sit flat in the holder. Replace the cover of the
MicroAlert Alarm.
ADDITIONAL
MICROALERT ALARM OPERATING INFORMATION
Avoid strong static electric
sparks around the MicroAlert. These might shift the sensitivity level and could
require you to calibrate it. For 6 MHz radio waves, the unit is about half as
sensitive as it is in most of its range. This means you should multiply the
numbers in the diagram by two if you know the wave is 6 MHz. It is less
sensitive at lower frequencies than 6 MHz. At 5 MHz, multiply by 3. At 2 MHz,
multiply by 7. At 1 MHz, multiply by 20, and at 500 KHz, multiply by 50 (that
is, it is 1/50 as sensitive). General maximum public exposure to microwaves is
10 microwatts/cm2 in several European countries. In the US, the maximum
allowable is much higher, at approximately 600 microwatts/cm2, for typical cell
tower frequencies (the maximum allowable exposure depends slightly on the actual
frequency of the microwave field in question). The MicroAlert does not detect
600 microwatts / cm2, though it can be used to check European Standards, which
are within it?s range of detection. In most areas in US cities, the level is
below 10 microwatts / cm2.
One-Year Limited
Warranty |
81.50 |
View |
|
Personal EMF Alarm
PERSONAL EMF ALARM
Attention
all pacemaker wearers!
Attention all paranormal researchers!
Attention electrical sensitives!
What could be better than
a meter which alerts you with a loud audible alarm when it encounters a field?
How about a meter which allows you to set the sensitivity of the alarm? How
about a 3 axis meter? How about a meter which does all this for AC magnetic
fields, AC electric fields, and RF radiation?! This meter does all that, for
under $200!!
We are very excited to
offer this simple and useful item for anyone who wants to monitor their EMF
environment without having to stare at their meter for hour after hour. Carry it
with you to alert you when you become exposed to more radiation that you want.
Set it in a strategic location to alert you when a field trips the alarm. You
set the level (threshold) above which the alarm will sound. Can also be used as
a nice analog meter to read field strength.
SPECIFICATIONS
Minimum
Sensitivity
Scale
Accuracy
Frequency
Range
Magnetic 1:
1 mG
0-100 mG
? 20%
50 Hz - 100 kHz
Magnetic 2:
0.2 mG
0-3 mG
? 20%
50 Hz - 100 kHz
Electric:
5 V/m
0-1000 V/m
? 30%
50 Hz - 100 kHz
RF/Microwave:
0.01 mW/cm?
0-1 mW/cm?
Factor of 2
at 2 GHz
50 MHz - 3 GHz
It is important to note
that the magnetic and electric field settings of this meter are frequency
weighted from 30 to 500 Hz, and calibrated at 60 Hz (a 50 Hz calibrated unit is
available as a special order). What this means is that a 2 mG magnetic field at
60 Hz will read "2" on the meter, but 2 mG at 120 Hz will read
"4". From 500 Hz to 1000 Hz, the response is flat ?20%. Above 1000Hz,
sensitivity decreases with increasing frequency. |
189.95 |
View |
|
Shielded Cap
Smart and Subtle
Protect your brain from RF
(radio-frequency) pollution with this handsome baseball style hat. Specially
designed to shield the head from frequencies from below AM through microwave,
including cellular phone frequencies. Lined with sophisticated NaturaShield
fabric woven from cotton with an ultrathin Silver/Copper core thread for
excellent radiation protection. This gives this unique fabric a truly
comfortable, natural feel and the durability and washability of cotton, but with
exceptional reflective characteristics.
Research links RF radiation
with behavioral and cellular disturbances. Many people can actually sense the
differences in the levels of "mind noise" from RF radiation. Provide your brain
a quiet place without interference to your mental processes from RF
radiation.
Washable, Tan color.
Adjustment strap means one size fits all.
Union made in USA.
|
29.95 |
View |
|
15-Inch Zero-Radiation LCD Display
Zero-Radiation LCD displays are to be considered a “Custom Order” and are NON-RETURNABLE!
Would you let yourself or your children be exposed to DDT, lead and chloroform on a daily basis? Not likely. Yet electromagnetic fields, which are also now formally designated as “2B carcinogenic substances” by the International Agency for Research on C (IARC) are found in everyday displays!
Using radiation free computer monitors as shown here makes sense, as the display is the part of the computer with radiation. When you use unshielded monitors, one can actually measure the radiation going through your body! That radiation is linked to C, fatigue, headaches, Parkinson’s, MS and chronic pain.
Our users include:
The US National Institute of Health
The US Census Bureau
The US Department of Commerce
The United Nations
The Province of Quebec
The US Forest Service
The State of Massachusetts
Bankers Trust
MIT
John Hancock Insurance
John Hancock Retired Long Term Care
Miami Dade College
Waste Management
NASA
The National Bank of Canada
Other users include optometrists, physicians, accountants, attorneys, concerned parents and anybody who feels it is unwise to sit in front of the extremely high voltages of LCDs unless they are certified to 0.0 milligauss. Shouldn’t you use a Zero Radiation LCD Display?
Here’s what physicians say about magnetic radiation:
“As good as any other luxury monitor on the market, but the added peace of mind it brings makes it the clear choice.”
John Anderson, M.D.
“I wouldn’t be caught dead with any other monitor. As a parent I’ve already made adjustments so that my children use these radiation free monitors with their computers. I urge all parents to do the same.”
Laurence Dworet, M.D.
“I think people who use VDTs should be protected by reduction in emissions.”
Lincoln D. Russin, M.D. Chairman, Department of Radiology
Many people think LCDs have no emissions. This is not true. The fluorescent tube backlight in LCDs uses transformers which run at extremely high voltages (similar to CRTs) and which create strong magnetic fields. Our special line of Zero Radiation LCDs is doctor recommended and is certified to have 0.0 electromagnetic ELF fields at operating distance.
--------------------------------------------------------------------------------
Time Magazine writes: "Those exposed to fields of 2 milligauss showed a threefold increase in their risk, while children exposed to 3 milligauss showed a fourfold increase in the risk of leukemia. Such as clear progression makes it difficult to argue that factors other than exposure to the electromagnetic field were responsible for the extra cases of leukemia."
Time Magazine writes: the research "...shows an unmistakable correlation between the degree of exposure and the risk of childhood leukemia." The second study "...linked on-the-job exposure to electromagnetic fields and leukemia in workingmen." "What makes the Karolinska study particularly significant is the thoroughness of its design. The investigation encompassed nearly 500,000 people." "One of the most telling results was that the C risk grew in proportion to the strenght of the electromagnetic field. Children with constant exposure to the weakest fields, calculated at less than 1 milligauss (about the same that a coffee maker generates when it is brewing), had the lowest incidence of C." "Numerous reports in the popular press have blared out warnings." "...a growing number of scientific studies suggest that the risk of leukemia and other malignancies rises with exposure to electromagnetic fields."
Time Magazine, October 26th, 1992.
Radiation is linked to C, leukemia, headaches, fatigue, cataracts, miscarriages and birth defects. The US EPA recommends "prudent avoidance." In August of 2001, the International Agency for Research on C unanimously concluded that magnetic fields are carcinogens in the same class as DDT and lead. Scientists from the US, UK and 8 other countries "all agreed," said Dr. Larry Anderson. Magnetic fields were also linked in June of 2001 to a six fold increase in miscarriages, by the Kaiser Permanente’s research division.
The US EPA recommends “prudent avoidance.” In August of 2001, the International Agency for Research on C unanimously concluded that magnetic fields are carcinogens in the same class as DDT and lead. Scientists from the US, UK and 8 other countries “all agreed,” said Dr. Larry Anderson. Magnetic fields were also linked in June of 2001 to a six fold increase in miscarriages, by the Kaiser Permanente’s research division.
--------------------------------------------------------------------------------
The LCDs are the ultimate fashion statement! Their futuristic design is only two inches deep, which saves space. The LCDs are available in the following sizes: 15”, 17”, and 18”.
The LCDs are compatible with all computers, including IBM PC, DELL, Gateway, HP, Sony, Toshiba, Apple/MAC, etc.
Our company has been featured in:
The Boston Globe, the Chicago Sun Times, the Washington Post, Business Week, Newsweek Magazine, the Boston Business Journal, UPI, NBC radio, Good Morning America, USA Tonight, Glamour Magazine, PC Week Magazine, Lotus Magazine, CompuServe Magazine (“Averting Desktop Chernobyl”), Adweek’s Computer Magazine (cover story: Are VDT’s safe?), Marketing Computers Magazine (cover story: “Caught in the crossfire”), and CNN Business News.
This is a special order item and is not returnable
Notes:
LCDs do not waste space around the edges and because of that a 15-inch LCD is the equivalent of a 17-inch CRT. A 17-inch LCD is the equivalent of 19 inch CRT. And an 18.1-inch LCD is the equivalent of a 21-inch CRT!
The computer industry certifies LCDs and CRTs with either the TCO standard (2.0 milligauss) or the MPR standard (2.5 milligauss). Most experts suggest avoiding fields exceeding 1.0 to 2.0 milligauss. We certify our LCDs at 0.0 milligauss, giving you complete peace of mind.
|
550.00 |
View |
|
|
17-Inch Zero-Radiation LCD Display
Zero-Radiation LCD displays are to be considered a “Custom Order” and are NON-RETURNABLE!
Would you let yourself or your children be exposed to DDT, lead and chloroform on a daily basis? Not likely. Yet electromagnetic fields, which are also now formally designated as “2B carcinogenic substances” by the International Agency for Research on C (IARC) are found in everyday displays!
Using radiation free computer monitors as shown here makes sense, as the display is the part of the computer with radiation. When you use unshielded monitors, one can actually measure the radiation going through your body! That radiation is linked to C, fatigue, headaches, Parkinson’s, MS and chronic pain.
Our users include:
The US National Institute of Health
The US Census Bureau
The US Department of Commerce
The United Nations
The Province of Quebec
The US Forest Service
The State of Massachusetts
Bankers Trust
MIT
John Hancock Insurance
John Hancock Retired Long Term Care
Miami Dade College
Waste Management
NASA
The National Bank of Canada
Other users include optometrists, physicians, accountants, attorneys, concerned parents and anybody who feels it is unwise to sit in front of the extremely high voltages of LCDs unless they are certified to 0.0 milligauss. Shouldn’t you use a Zero Radiation LCD Display?
Here’s what physicians say about magnetic radiation:
“As good as any other luxury monitor on the market, but the added peace of mind it brings makes it the clear choice.”
John Anderson, M.D.
“I wouldn’t be caught dead with any other monitor. As a parent I’ve already made adjustments so that my children use these radiation free monitors with their computers. I urge all parents to do the same.”
Laurence Dworet, M.D.
“I think people who use VDTs should be protected by reduction in emissions.”
Lincoln D. Russin, M.D. Chairman, Department of Radiology
Many people think LCDs have no emissions. This is not true. The fluorescent tube backlight in LCDs uses transformers which run at extremely high voltages (similar to CRTs) and which create strong magnetic fields. Our special line of Zero Radiation LCDs is doctor recommended and is certified to have 0.0 electromagnetic ELF fields at operating distance.
--------------------------------------------------------------------------------
Time Magazine writes: "Those exposed to fields of 2 milligauss showed a threefold increase in their risk, while children exposed to 3 milligauss showed a fourfold increase in the risk of leukemia. Such as clear progression makes it difficult to argue that factors other than exposure to the electromagnetic field were responsible for the extra cases of leukemia."
Time Magazine writes: the research "...shows an unmistakable correlation between the degree of exposure and the risk of childhood leukemia." The second study "...linked on-the-job exposure to electromagnetic fields and leukemia in workingmen." "What makes the Karolinska study particularly significant is the thoroughness of its design. The investigation encompassed nearly 500,000 people." "One of the most telling results was that the C risk grew in proportion to the strenght of the electromagnetic field. Children with constant exposure to the weakest fields, calculated at less than 1 milligauss (about the same that a coffee maker generates when it is brewing), had the lowest incidence of C." "Numerous reports in the popular press have blared out warnings." "...a growing number of scientific studies suggest that the risk of leukemia and other malignancies rises with exposure to electromagnetic fields."
Time Magazine, October 26th, 1992.
Radiation is linked to C, leukemia, headaches, fatigue, cataracts, miscarriages and birth defects. The US EPA recommends "prudent avoidance." In August of 2001, the International Agency for Research on C unanimously concluded that magnetic fields are carcinogens in the same class as DDT and lead. Scientists from the US, UK and 8 other countries "all agreed," said Dr. Larry Anderson. Magnetic fields were also linked in June of 2001 to a six fold increase in miscarriages, by the Kaiser Permanente’s research division.
The US EPA recommends “prudent avoidance.” In August of 2001, the International Agency for Research on C unanimously concluded that magnetic fields are carcinogens in the same class as DDT and lead. Scientists from the US, UK and 8 other countries “all agreed,” said Dr. Larry Anderson. Magnetic fields were also linked in June of 2001 to a six fold increase in miscarriages, by the Kaiser Permanente’s research division.
--------------------------------------------------------------------------------
The LCDs are the ultimate fashion statement! Their futuristic design is only two inches deep, which saves space. The LCDs are available in the following sizes: 15”, 17”, and 18”.
The LCDs are compatible with all computers, including IBM PC, DELL, Gateway, HP, Sony, Toshiba, Apple/MAC, etc.
Our company has been featured in:
The Boston Globe, the Chicago Sun Times, the Washington Post, Business Week, Newsweek Magazine, the Boston Business Journal, UPI, NBC radio, Good Morning America, USA Tonight, Glamour Magazine, PC Week Magazine, Lotus Magazine, CompuServe Magazine (“Averting Desktop Chernobyl”), Adweek’s Computer Magazine (cover story: Are VDT’s safe?), Marketing Computers Magazine (cover story: “Caught in the crossfire”), and CNN Business News.
This is a special order item and is not returnable
Notes:
LCDs do not waste space around the edges and because of that a 15-inch LCD is the equivalent of a 17-inch CRT. A 17-inch LCD is the equivalent of 19 inch CRT. And an 18.1-inch LCD is the equivalent of a 21-inch CRT!
The computer industry certifies LCDs and CRTs with either the TCO standard (2.0 milligauss) or the MPR standard (2.5 milligauss). Most experts suggest avoiding fields exceeding 1.0 to 2.0 milligauss. We certify our LCDs at 0.0 milligauss, giving you complete peace of mind.
|
650.00 |
View |
|
|
18-Inch Zero-Radiation LCD Display
Zero-Radiation LCD displays are to be considered a “Custom Order” and are NON-RETURNABLE!
Would you let yourself or your children be exposed to DDT, lead and chloroform on a daily basis? Not likely. Yet electromagnetic fields, which are also now formally designated as “2B carcinogenic substances” by the International Agency for Research on C (IARC) are found in everyday displays!
Using radiation free computer monitors as shown here makes sense, as the display is the part of the computer with radiation. When you use unshielded monitors, one can actually measure the radiation going through your body! That radiation is linked to C, fatigue, headaches, Parkinson’s, MS and chronic pain.
Our users include:
The US National Institute of Health
The US Census Bureau
The US Department of Commerce
The United Nations
The Province of Quebec
The US Forest Service
The State of Massachusetts
Bankers Trust
MIT
John Hancock Insurance
John Hancock Retired Long Term Care
Miami Dade College
Waste Management
NASA
The National Bank of Canada
Other users include optometrists, physicians, accountants, attorneys, concerned parents and anybody who feels it is unwise to sit in front of the extremely high voltages of LCDs unless they are certified to 0.0 milligauss. Shouldn’t you use a Zero Radiation LCD Display?
Here’s what physicians say about magnetic radiation:
“As good as any other luxury monitor on the market, but the added peace of mind it brings makes it the clear choice.”
John Anderson, M.D.
“I wouldn’t be caught dead with any other monitor. As a parent I’ve already made adjustments so that my children use these radiation free monitors with their computers. I urge all parents to do the same.”
Laurence Dworet, M.D.
“I think people who use VDTs should be protected by reduction in emissions.”
Lincoln D. Russin, M.D. Chairman, Department of Radiology
Many people think LCDs have no emissions. This is not true. The fluorescent tube backlight in LCDs uses transformers which run at extremely high voltages (similar to CRTs) and which create strong magnetic fields. Our special line of Zero Radiation LCDs is doctor recommended and is certified to have 0.0 electromagnetic ELF fields at operating distance.
--------------------------------------------------------------------------------
Time Magazine writes: "Those exposed to fields of 2 milligauss showed a threefold increase in their risk, while children exposed to 3 milligauss showed a fourfold increase in the risk of leukemia. Such as clear progression makes it difficult to argue that factors other than exposure to the electromagnetic field were responsible for the extra cases of leukemia."
Time Magazine writes: the research "...shows an unmistakable correlation between the degree of exposure and the risk of childhood leukemia." The second study "...linked on-the-job exposure to electromagnetic fields and leukemia in workingmen." "What makes the Karolinska study particularly significant is the thoroughness of its design. The investigation encompassed nearly 500,000 people." "One of the most telling results was that the C risk grew in proportion to the strenght of the electromagnetic field. Children with constant exposure to the weakest fields, calculated at less than 1 milligauss (about the same that a coffee maker generates when it is brewing), had the lowest incidence of C." "Numerous reports in the popular press have blared out warnings." "...a growing number of scientific studies suggest that the risk of leukemia and other malignancies rises with exposure to electromagnetic fields."
Time Magazine, October 26th, 1992.
Radiation is linked to C, leukemia, headaches, fatigue, cataracts, miscarriages and birth defects. The US EPA recommends "prudent avoidance." In August of 2001, the International Agency for Research on C unanimously concluded that magnetic fields are carcinogens in the same class as DDT and lead. Scientists from the US, UK and 8 other countries "all agreed," said Dr. Larry Anderson. Magnetic fields were also linked in June of 2001 to a six fold increase in miscarriages, by the Kaiser Permanente’s research division.
The US EPA recommends “prudent avoidance.” In August of 2001, the International Agency for Research on C unanimously concluded that magnetic fields are carcinogens in the same class as DDT and lead. Scientists from the US, UK and 8 other countries “all agreed,” said Dr. Larry Anderson. Magnetic fields were also linked in June of 2001 to a six fold increase in miscarriages, by the Kaiser Permanente’s research division.
--------------------------------------------------------------------------------
The LCDs are the ultimate fashion statement! Their futuristic design is only two inches deep, which saves space. The LCDs are available in the following sizes: 15”, 17”, and 18”.
The LCDs are compatible with all computers, including IBM PC, DELL, Gateway, HP, Sony, Toshiba, Apple/MAC, etc.
Our company has been featured in:
The Boston Globe, the Chicago Sun Times, the Washington Post, Business Week, Newsweek Magazine, the Boston Business Journal, UPI, NBC radio, Good Morning America, USA Tonight, Glamour Magazine, PC Week Magazine, Lotus Magazine, CompuServe Magazine (“Averting Desktop Chernobyl”), Adweek’s Computer Magazine (cover story: Are VDT’s safe?), Marketing Computers Magazine (cover story: “Caught in the crossfire”), and CNN Business News.
This is a special order item and is not returnable
Notes:
LCDs do not waste space around the edges and because of that a 15-inch LCD is the equivalent of a 17-inch CRT. A 17-inch LCD is the equivalent of 19 inch CRT. And an 18.1-inch LCD is the equivalent of a 21-inch CRT!
The computer industry certifies LCDs and CRTs with either the TCO standard (2.0 milligauss) or the MPR standard (2.5 milligauss). Most experts suggest avoiding fields exceeding 1.0 to 2.0 milligauss. We certify our LCDs at 0.0 milligauss, giving you complete peace of mind.
|
895.00 |
View |
|
|
19-Inch Zero-Radiation LCD Display
Zero-Radiation LCD displays are to be considered a “Custom Order” and are NON-RETURNABLE!
Would you let yourself or your children be exposed to DDT, lead and chloroform on a daily basis? Not likely. Yet electromagnetic fields, which are also now formally designated as “2B carcinogenic substances” by the International Agency for Research on C (IARC) are found in everyday displays!
Using radiation free computer monitors as shown here makes sense, as the display is the part of the computer with radiation. When you use unshielded monitors, one can actually measure the radiation going through your body! That radiation is linked to C, fatigue, headaches, Parkinson’s, MS and chronic pain.
Our users include:
The US National Institute of Health
The US Census Bureau
The US Department of Commerce
The United Nations
The Province of Quebec
The US Forest Service
The State of Massachusetts
Bankers Trust
MIT
John Hancock Insurance
John Hancock Retired Long Term Care
Miami Dade College
Waste Management
NASA
The National Bank of Canada
Other users include optometrists, physicians, accountants, attorneys, concerned parents and anybody who feels it is unwise to sit in front of the extremely high voltages of LCDs unless they are certified to 0.0 milligauss. Shouldn’t you use a Zero Radiation LCD Display?
Here’s what physicians say about magnetic radiation:
“As good as any other luxury monitor on the market, but the added peace of mind it brings makes it the clear choice.”
John Anderson, M.D.
“I wouldn’t be caught dead with any other monitor. As a parent I’ve already made adjustments so that my children use these radiation free monitors with their computers. I urge all parents to do the same.”
Laurence Dworet, M.D.
“I think people who use VDTs should be protected by reduction in emissions.”
Lincoln D. Russin, M.D. Chairman, Department of Radiology
Many people think LCDs have no emissions. This is not true. The fluorescent tube backlight in LCDs uses transformers which run at extremely high voltages (similar to CRTs) and which create strong magnetic fields. Our special line of Zero Radiation LCDs is doctor recommended and is certified to have 0.0 electromagnetic ELF fields at operating distance.
--------------------------------------------------------------------------------
Time Magazine writes: "Those exposed to fields of 2 milligauss showed a threefold increase in their risk, while children exposed to 3 milligauss showed a fourfold increase in the risk of leukemia. Such as clear progression makes it difficult to argue that factors other than exposure to the electromagnetic field were responsible for the extra cases of leukemia."
Time Magazine writes: the research "...shows an unmistakable correlation between the degree of exposure and the risk of childhood leukemia." The second study "...linked on-the-job exposure to electromagnetic fields and leukemia in workingmen." "What makes the Karolinska study particularly significant is the thoroughness of its design. The investigation encompassed nearly 500,000 people." "One of the most telling results was that the C risk grew in proportion to the strenght of the electromagnetic field. Children with constant exposure to the weakest fields, calculated at less than 1 milligauss (about the same that a coffee maker generates when it is brewing), had the lowest incidence of C." "Numerous reports in the popular press have blared out warnings." "...a growing number of scientific studies suggest that the risk of leukemia and other malignancies rises with exposure to electromagnetic fields."
Time Magazine, October 26th, 1992.
Radiation is linked to C, leukemia, headaches, fatigue, cataracts, miscarriages and birth defects. The US EPA recommends "prudent avoidance." In August of 2001, the International Agency for Research on C unanimously concluded that magnetic fields are carcinogens in the same class as DDT and lead. Scientists from the US, UK and 8 other countries "all agreed," said Dr. Larry Anderson. Magnetic fields were also linked in June of 2001 to a six fold increase in miscarriages, by the Kaiser Permanente’s research division.
The US EPA recommends “prudent avoidance.” In August of 2001, the International Agency for Research on C unanimously concluded that magnetic fields are carcinogens in the same class as DDT and lead. Scientists from the US, UK and 8 other countries “all agreed,” said Dr. Larry Anderson. Magnetic fields were also linked in June of 2001 to a six fold increase in miscarriages, by the Kaiser Permanente’s research division.
--------------------------------------------------------------------------------
The LCDs are the ultimate fashion statement! Their futuristic design is only two inches deep, which saves space. The LCDs are available in the following sizes: 15”, 17”, and 18”.
The LCDs are compatible with all computers, including IBM PC, DELL, Gateway, HP, Sony, Toshiba, Apple/MAC, etc.
Our company has been featured in:
The Boston Globe, the Chicago Sun Times, the Washington Post, Business Week, Newsweek Magazine, the Boston Business Journal, UPI, NBC radio, Good Morning America, USA Tonight, Glamour Magazine, PC Week Magazine, Lotus Magazine, CompuServe Magazine (“Averting Desktop Chernobyl”), Adweek’s Computer Magazine (cover story: Are VDT’s safe?), Marketing Computers Magazine (cover story: “Caught in the crossfire”), and CNN Business News.
This is a special order item and is not returnable
Notes:
LCDs do not waste space around the edges and because of that a 15-inch LCD is the equivalent of a 17-inch CRT. A 17-inch LCD is the equivalent of 19 inch CRT. And an 18.1-inch LCD is the equivalent of a 21-inch CRT!
The computer industry certifies LCDs and CRTs with either the TCO standard (2.0 milligauss) or the MPR standard (2.5 milligauss). Most experts suggest avoiding fields exceeding 1.0 to 2.0 milligauss. We certify our LCDs at 0.0 milligauss, giving you complete peace of mind.
|
995.00 |
View |
|
Q-Link Classic and EMF Detector Combo
SPECIAL: Q-Link Classic and EMF Detector Combo
Beware of imitators. These are guaranteed to be the original Brand name Qlink product you trust!
What takes strokes off golf games, gives athletes a competitive advantage, and relieves stress from EMF (electromagnetic fields)? According to the people who wear them, it?s the QLink Pendants with Sympathetic Resonance Technology? (SRT?). They also report that these personal life-enhancing products help them be more energized, focused and balanced.
Both alternative and traditional doctors have tested the QLink Pendants and report that they neutralize the EMF stress effects from computers, cell phones and other electronic devices.
Athletes say that the QLink Pendants keeps them in that centered state called "The Zone". Runners say wearing a QLink Pendant increases their endurance and gives them a competitive edge.
As the complexity and stresses of modern life increase, the QLink Pendants are fast becoming the product of choice for those people who value performance and optimal well-being.
All you have to do to experience these benefits is to wear one.
The QLink Classic Pendant is durable and waterproof, requiring no batteries and no maintenance. Light-weight, bio-compatible black acrylic, 1.5" across and diamond shaped.
SPECIAL: Q-Link Classic and EMF Detector Combo
CELL SENSOR? EMF Detector and Gauss Meter Information.
Cellular Phone Meter and Gaussmeter All in One. EMF (Electromagnetic Field) Detection & Measurement Meter
The World?s First Meter to Address the Health Issues Associated with the Cellular Phone and EMF Power Line Controversies.
Dual use meter featuring both cell phone frequency RF measurement as well as a single axis ELF gaussmeter... at an amazing low price! Calibrated at 835 MHz (with an accuracy of ?3dB), the RF meter measures the intensity of radiation from analog cellular phones and other 900 MHz sources. Two analog scales: HIGH sensitivity 0-1 mW/cm?, and NORMAL sensitivity 0-10 mW/cm?.
Gaussmeter feature is calibrated around 50/60 Hz and also offers 2 scales: 0-5 and 0-50 mG. Remote probe with 2 foot extension cord allows user great flexibility and reach. Both RF and gaussmeter provide audio sound and large flashing light which corresponds to field strength.
10 to 20% of all homes are covered in "hot spots" of electromagnetic fields over 2 milligauss. With the CellSensor, one can walk the house and in 5 minutes find these hot spots that measure over 2 and avoid placing beds and furniture there. Simple to use, the meter shows the hot spots with needle, light and sound! The meter is normally quiet...showing 0 reading. When you walk by a hot spot, the needle goes up over 2, the light glows, the sound beeps!
Without the meter, it is impossible to know where the hot spots are! A hot spot could be created by sleeping with a TV on the other side of the wall, or by faulty wiring, typical after renovation projects, or by proximity to visible or hidden underground powerlines!
While the reason for the creation of hot spots can be simple or complex, avoiding the hot spots is always very simple. Most hot spots are small, so moving a bed or furniture just a couple of feet usually does the trick! Most hot spots are dealt with that way, just avoid placing furniture there by moving it a little bit!
Simply plug the included probe into the meter, turn it on, place the setting on H for high sensitivity, and the meter needle now is reading 0 to 5 in its display. Readings over 2 are high. Those are the hot spots to avoid. In this same way the meter shows safe distances from appliances such as TVs and microwaves!
Since 10 to 20% of all homes have hot spots, it is important to spend 5 minutes checking the home! It is simple and one gets a great feeling of accomplishment when one move?s a child?s pillow away from a hot spot!
Here is what Time Magazine wrote about electromagnetic fields:
Time Magazine writes: "Those exposed to fields of 2 milligauss showed a threefold increase in their risk, while children exposed to 3 milligauss showed a fourfold increase in the risk of leukemia. Such as clear progression makes it difficult to argue that factors other than exposure to the electromagnetic field were responsible for the extra cases of leukemia."
Time Magazine writes: the research "...shows an unmistakable correlation between the degree of exposure and the risk of childhood leukemia." The second study "...linked on-the-job exposure to electromagnetic fields and leukemia in workingmen." "What makes the Karolinska study particularly significant is the thoroughness of its design. The investigation encompassed nearly 500,000 people." "One of the most telling results was that the C risk grew in proportion to the strenght of the electromagnetic field. Children with constant exposure to the weakest fields, calculated at less than 1 milligauss (about the same that a coffee maker generates when it is brewing), had the lowest incidence of C." "Numerous reports in the popular press have blared out warnings." "...a growing number of scientific studies suggest that the risk of leukemia and other malignancies rises with exposure to electromagnetic fields."
Time Magazine, October 26th, 1992.
Radiation is linked to C, leukemia, headaches, fatigue, cataracts, miscarriages and birth defects. The US EPA recommends "prudent avoidance." In August of 2001, the International Agency for Research on C unanimously concluded that magnetic fields are carcinogens in the same class as DDT and lead. Scientists from the US, UK and 8 other countries "all agreed," said Dr. Larry Anderson. Magnetic fields were also linked in June of 2001 to a six fold increase in miscarriages, by the Kaiser Permanente?s research division.
Includes complete documentation on how to conduct proper measurements, guide to emissions standards, and methods to reduce unnecessary exposure. Patented & CE compliant. 30-day mfr. warrantee. This is not our most accurate meter (in fact, we have found that it usually does not zero properly), but at this price it makes a great tool for simple surveys, school projects, and many tool box applications.
Learn to Detect and Measure EMF Fields
Some information on the CellSensor:
Can measure Cellular Phone RF Radiation
Also measures Electromagnetic Fields Generated by Power Lines, Computer Monitors, TVs, Appliances, Home Wiring, and Other Unsuspected Sources.
Ease-of-Use
Web Support Available
Free Booklet on RF/ELF Issues Included
(Includes Guides on How to Reduce Your Exposure) and Exterior Probe
Features:
Sound and Visual Signals Combined with Analog Measurement Make for an Ideal Meter.
Audio signal with volume control
Light signal
ISO 9001 controlled manufacturing
Comprehensive documentation backed by web support
Competitively priced
Rugged ABS plastic construction, high quality components
CE registered
Requires one 9-volt alkaline battery
Backed by a no-questions-asked 30-day end user warranty
The average home in America is 10%-15% covered by radiation hotspots above 2 milligauss. The first problem with powerlines are high voltage lines. Another problem with powerlines is that you could have a home location which has a powerline behind or under it... that is why it is important to check. One solution is to bury the powerlines, but good luck doing so because the cost of burying the lines is 10 times the cost of having them aerial
We know how well the Q Link pendants work and guarantee they will protect you from EMF and allow you to be more centered and balanced and you have a money back guarantee for 90 days.
"Returns: When returning this product it must be accompanied with all its packaging and related paperwork to receive a refund" |
115.00 |
View |
|
SafeGuard APRON
Durable, Convenient, and Attractive"
This unique apron is constructed using a special cotton based NaturaShield shielding fabric which is a highly effective RF shield, providing 25-35 dB from 200 MHz to 3.3 GHz according to independent test results. Soft feel and gentle to the skin. Completely machine washable and dryable (cool) without losing shielding performance. Generously cut for comfort and great "neck to hip" protection for pregnant women, computer and microwave oven users, TV or radio station workers, research and hospital workers, or anywhere people are exposed to RF radiation. |
59.95 |
View |
|
Safe Gauss Meter
Safe Gauss Meter
Would you let yourself or your children be exposed to DDT, lead and chloroform in a daily basis? Not likely. Yet electromagnetic fields, which are also now formally designated as "2B carcinogenic substances" by the International Agency for Research on C (IARC) are found in every American home! Finding fields in the home above 2.0 milligauss with our simple to use Gauss meter and avoiding them is trivial, as they diminish rapidly with distance. Visualize this: all homes have hotspots that family members sleep and sit on, and moving a few feet would solve the problem. Failure to measure is the same as exposing your family to high fields! Act today!
The U.S. EPA says, "There is reason for concern" and advises "prudent avoidance." The Safe Meter help you locate, measure, and avoid magnetic radiation, which has been linked to C and other health problems in children and adults, such as headaches, cataracts, pain and depression.
Use the Safe Meter to: Find the safe distance from your computer monitor. Find hotspots at home, school or in the office in order to avoid them. Find the best location for furniture in order to minimize exposure. Measure fields around appliances (alarm clocks, microwave ovens, televisions, and copying machines). Measure fields near power lines, transformers and hidden wiring, inside and outside your home, school, and office.
EMF Fields and Real Estate Values: When buying a home, it is important to check for EMFs. Homes "sold for 30% less" when exposed to EMFs, as reported by the Wall Street Journal. According to a survey done by Indoor Air Review, 26% of homes have areas that register EMF fields exceeding 3 milligauss.
"...Sweden has concluded that EMFs do lead to higher rates of C-I, frankly was quite impressed by the arguments of the Swedes." - President Bill Clinton
USA Today conducted a survey of 4,567 readers and reported that electromagnetic fields, or EMFs, are the number one environmental concern in America. "EMFs - always present near power lines and working electrical appliances - are liked to such diseases as leukemia and breast C."
"-Studies on cats, rats, and chick brain cells have shown that low frequency electromagnetic radiation interacts with brain activity and could cause a host of negative symptoms from heightened stress and depression, slowed reaction time, and learning disabilities to miscarriages, fetal deformities, and C." Business Week
"This is really harming people." Dr. D. Carpenter, Dean, School of Public Health, NYU
"The Safe Meter worked very well in measuring magnetic fields. I was surprised at the high output from my computer monitor. I am worried about these fields. Now is the time to measure these fields, in order to minimize them.? Lincoln Russin, M.D. Chairman, Radiology Department
Our users include: The New York Department of Health, The World Health Organization, Arvida Realty, Boston Edison, University of Pennsylvania, parents, homeowners and people who want to avoid high fields.
Most experts agree that it is prudent to limit exposure to less than 2.0 milligauss of ELF EMF.
The Safe Gauss Meter is easy to use. Simply turn it on and read the field strength. Owner's manual includes easy to follow advice and helpful hints for your safety.
|
193.95 |
View |
|
The EarthCalm Home Protector
A note from the inventor of EarthCalm Products | EarthCalm Testimonials | EarthCalm FAQ's | EarthCalm Brochure | What is the Schumann Resonance? | What is the difference between an EarthCalm Resonator and the Q-Link pendant? | Cell Phone and Cordless Phone protection | Headaches & Migraines | Fibromyalgia & Electrical Sensitivity | Children, ADHD & Asthma | Protect yourself
Free Shipping on this Item!
Get 10% off when you buy TWO or more EarthCalm productsUsing a combination of the EarthCalm Home or Office Unit and the EarthCalm Resonator produces better results than when they are used separately. Due to this, we are offering a 10% discount when you purchase 2 or more of these EarthCalm products:
EarthCalm Resonator ( pendant or anklet )
EarthCalm Home Protector
EarthCalm Office Protector
"EarthCalm products never need "recharging" and are offered with a 90 day money back guarantee to encourage you to experiment with this product yourself. This item can be returned in 90 days for a credit minus a $7.99 shipping fee for the 48 States."
EarthCalm Home Protectors use no electrical current. They introduce or modulate a "configuration" into the standing field in the home. This healing pattern is transferred to each living being in the home. In addition, because the Home Protector uses no current it will last indefinitely. The Home Protector is particularly important for children. Their nervous systems are more vulnerable to EMFs than adults. The Home Protector will protect pets as well. If your child is moderately or severely hyperactive, or you or a family member has electromagnetic sensitivities the Scalar Home Protection System which will allow for a more gradual adjustment period, is strongly recommended.
Most scientists agree that the mechanism whereby EMFs impact the body's nervous system is explained by the principle of resonance. Cyclotronic (this word refers to spinning electrons) resonance states that if two AC fields stand at right angles to each other, as in every corner in a house, and a DC field is present, as provided by the earth, then energy is actually transferred from the electrical wiring into the nervous system of people within the home. This grid is always working in any electrified building whether current is being used or not. Cyclotronic resonance explains the initial transference of energy from a building
"Returns: When returning this product it must be accompanied with all its packaging and related paperwork to receive a refund"
Notice to Researchers: EarthCalm is looking for a reputable Research Team who would be willing to conduct scientific research on the efficacy of EarthCalm Home Protectors for ADHD and Asthmatic conditions in children. |
159.00 |
View |
|
The EarthCalm Office Protector
Free Shipping on this Item!
A note from the inventor of EarthCalm Products | EarthCalm Testimonials | EarthCalm FAQ's | EarthCalm Brochure | What is the Schumann Resonance? | What is the difference between an EarthCalm Resonator and the Q-Link pendant? | Cell Phone and Cordless Phone protection | Headaches & Migraines | Fibromyalgia & Electrical Sensitivity | Children, ADHD & Asthma | Protect yourself
Get 10% off when you buy TWO or more EarthCalm products
We give you this 10% off package using the EarthCalm Home or Office Unit and the EarthCalm Resonator as the combination of these items produces better results
"EarthCalm products never need "recharging" and are offered with a 90 day money back guarantee to encourage you to experiment with this product yourself. This item can be returned in 90 days for a credit minus a $7.99 shipping fee for the 48 States."
Designed for business owners who desire to provide EMF protection for their workers. Business owners will notice decreased absenteeism and a higher level of productivity. Consider starting with the 7 circuit EarthCalm Office Protector and later upgrade by purchasing another Office Protector to provide full 14 circuit protection for your employees. If you are a business professional, two Office Protectors will put your clients at ease. Therapists might also find their clients more open to insight and change.
Most people however who work in an office should consider the basic Resonator or Scalar Resonator for their own personal protection while at work. Certainly it is true that working in an office entails for most people maximum exposure to intense EMFs, nonetheless, it is more important to have EMF protection at home when you sleep to get the full value of EarthCalm products. The nervous system regenerates naturally while you sleep and this is the most vital time to be using EarthCalm products, allowing for the greatest time for healing.
Specifications: Measures: 2” x 2” x 2”. May be plugged into any 3 hole outlet (or 2 hole with simple adapter) anywhere in the office. Contains 7 circuits. For a limited time, outside the USA plug adapters are included free of charge. Can be combined with a second Office Protector to achieve 14 circuit Scalar Resonance Technology.
"Returns: When returning this product it must be accompanied with all its packaging and related paperwork to receive a refund"
Notice to Researchers: EarthCalm is looking for a reputable Research Team who would be willing to conduct scientific research on the efficacy of EarthCalm Home Protectors for ADHD and Asthmatic conditions in children. |
159.00 |
View |
|
RF Field Strength Meter
Tri-field RF Field Strength Meter measures radio frequencies
Technically a "power density" meter, the RF Field Strength Meter detects the electric field of radio and microwaves (RF) from .5 MHz to 3 GHz, and expresses the field strength as power density (.001 to 2000 microwatts/cm2).
This is an extremely sensitive meter which can accurately measure RF background even in rural areas far from any transmitters. The meter reads true power density directly on the display. Unlike other low-cost field strength meters, this meter?s frequency response does not depend on the characteristics of an external antenna; the internal detection system yields a flat response over a very wide range of frequencies.
Accuracy in the FM, TV and cell tower frequency range (30 MHz ? 2.4 GHz) is +/-25%. Sensitivity is low by 50% (-3 dB) at the frequency limits .5 MHz and 3 GHz. (Sensitivity is 25% at 5 GHz. That is, you must multiply the reading by 4 when measuring microwaves at that high a frequency. At 10 GHz, sensitivity is about 10%.)
A High-Pass selector switch allows you to measure either the full bandwidth ("Wide" = 0.5 MHz ? 3 GHz) or to apply a high-pass filter ("Narrow" = 6 dB/ octive rolloff with a knee at 100 MHz) that effectively allows only 100 MHz to 3 GHz through. In practice, this high-pass selector function can be used to estimate one additional parameter: the average frequency of the RF (if it is in the range 10 MHz ? 500 MHz).
The RF Field Strength Meter is directional and it detects only the component of the electric field which has the same polarization as the long axis of the meter. That is, if only a vertically-polarized RF wave is present, but you turn the meter in the horizontal direction, it will essentially read zero. If you subsequently rotate the meter to vertical, it will then read the full power density of the RF wave. Most RF radiation has only vertical electric field, so the full strength can be read by holding the meter vertically. (At the end of this page is more information on how to read radio waves with other polarizations).
The meter has a 4 ? digit display which reads in three ranges: .001 to 19.999, .01 to 199.99, and .1 to 1999.9 microwatts/cm2. For comparison, a low power 100 milliwatt dipole transmitter (typical 49 MHz cordless phone) produces about .010 microwatts/cm2 at a distance of 50 feet. This is 10x the minimum sensitivity of the meter. A FAST/SLOW update switch is normally set in the FAST position so you can quickly measure changes in the RF level. However, if the field strength is fluctuating rapidly, this switch can be set to the SLOW position, which averages the reading over several seconds.
The "zero" level will shift slightly with temperature. This shift is no more than +/- .010 microwatts/cm2 over the meter?s operating temperature range of 30? F to 110? F (-1 to 43? C). Two controls on the right side of the meter correct for this: a button, when pressed, turns off the pre-amplifier, so it is the equivalent of zero field. Then an offset control is rotated until the meter reads zero in the most sensitive "19.999" setting. After one minute or more of warm-up, this should be adjusted. Once adjusted, this need not be readjusted unless the temperature changes by more than 5? F. (Then a shift of about .001microwatt /cm2 will occur).
The RF Field Strength Meter comes with a standard 9-volt battery and a one-year warranty. A low-battery indicator shows on the display when approximately 10 minutes of battery life remain. Electric current consumption from the battery is about 15 ma, with low battery indication at about 7.6 volts.
[The following goes into more detail about using the meter to estimate the average frequency of an RF signal, and also the directionality of RF measurements.]
When measuring an RF signal of unknown frequency, you may notice that the reading is different when the Bandwidth switch is set to "Wide" vs. "Narrow". If so, you can estimate the average frequency (averaged over the power density) of the RF spectrum. If it?s just a wave of a single frequency, you can estimate the frequency of that wave.
This estimate is done by measuring the power density with the Bandwidth switch set at "Wide", and then measuring the power density with the switch set to "Narrow". If these numbers are the same, the average frequency is above 500 MHz. If the "Narrow" number is less than 1% of the "Wide" number, then the average frequency is below 10 MHz. If the "Narrow" number is between about 1% and 96% of the "Wide" number, you can estimate average frequency from the ratio of the two numbers. (A written table is in the instructions).
Although most commercial RF transmitters radiate with a vertical antenna and thus a vertical electric field (so you can hold the meter vertically to measure the full power density), some RF radiation also has some horizontal component, due to reflections or transmitters that have antennas not pointed vertical. If you know where the transmitter is, you will only have to perform two readings to find the transmitter?s total power density at your position. These correspond to "Z" (vertical) and "X" (horizontal, but perpendicular to the direction of the transmitter). In theory, if you point the meter?s long axis toward the antenna (the "Y" direction), you will not detect any radiation from that antenna. This seems counterintuitive. (In fact, there may be some diagonal reflectors near you that produce a small "Y" component coming from the transmitter, but this is not usually significant).
In practice, if the back face of the meter is facing the RF source, and the meter is read first in the vertical orientation and then it is read after being rotated 90? to the horizontal position (with the back face still facing the RF source), the sum of those two numbers will be the true power density from that transmitter. (This addition is a "sum of squares". That is, because power density is proportional to the square of the electric field, then the direct sum of these two numbers, and not the square root of the direct sum, will be the correct magnitude of the power density.) Most RF field sources are principally vertically polarized, in which case only the vertical reading needs to be done. To measure the full power density at a certain point in space, regardless of the sources? locations, measure the vertical first (meter pointed upward). This will usually be the majority of the RF power density. Then make two measurements 90? apart, with the meter?s long axis pointed in the horizontal direction. For example, after the vertical measurement, measure holding the meter in a north-south orientation and then in an east-west orientation. The sum of these three numbers is the total power density at that point in space, regardless of the position of the transmitter or transmitters. An accuracy problem arises however, because your body can block RF radiation, so if an unseen transmitter is located on the opposite side of your body from the meter, the reading will be falsely low. If you hold the meter higher than your head, this problem disappears. The presence of your hand and arm will have some effect on the field strength at the meter, so the most accurate reading is taken by setting the meter on a non-metallic surface or using, for example, a plastic holder. |
320.00 |
View |
|
Tri-field EMF meter
Tri-field measures all three AC Electric Fields, Magnetic wave and Radio Microwave
AC gaussmeter, electric field meter, RF field strength meter combined in one electromagnetic instrument. The TriField Meter (and BroadBand TriField Meter) is an excellent tool for electricians or those curious about EMF fields.
The original TriField ? Meter combines all the features needed for fast, accurate measurements of electromagnetic fields. It independently measures electric field and magnetic field, and is properly scaled to indicate the full magnitude of currents produced by each type of field inside a conductive body. As a result, it "sees" much more than any other electromagnetic pollution meter. [en fran?ais]
Depending on where the knob is set, the meter detects either frequency- weighted magnetic fields (two separate scales), or frequency-weighted electric fields in the ELF and VLF range. It has significant sensitivity at 100,000 Hz, well past the 17,000 Hz horizontal scan of video displays. The radio/microwave setting can detect up to three billion Hz (3 GHz), which lets you gauge radio- wave power, CB and cellular phone equipment, and many types of radars.
This meter is the only one which combines magnetic, electric, and radio/microwave detectors in one package, so that the entire nonionizing electromagnetic spectrum is covered. In addition, the magnetic setting and the electric setting measure true magnitude, a feature found elsewhere only in more expensive meters. If you hold the meter in the center of a room and tip it to various angles, the magnetic reading will stay approximately the same regardless of which way you tip or rotate it. The electric reading is similar, although the presence of your body alters the actual electric field, so readings will vary more. The radio/microwave setting reads the full power of radiowaves when the meter is pointed toward the source.
Surprisingly, the standard TriField Meter is one of the least expensive meters available. The few other meters below $150 read only low-frequency magnetic fields and only in one direction (not true magnitude). The magnetic section of the TriField meter has three field-detecting coils pointing in the X, Y, and Z directions. A circuit amplifies these signals and gives them the proper frequency-weighting (sensitivity increases linearly from 30 Hz to 500 Hz, but with some residual sensitivity up to 100 MHz). A unique network combines the three coil outputs nonlinearly to approximate a true magnitude. The meter is sensitive from 0.2 to 100 milligauss full scale at 60 Hz (or 0.1 to 50 milligauss full scale at 120 Hz, etc.) with a resolution of 0.2 milligauss in the sensitive range. Accuracy is +/-20% at mid-range. A version with flat frequency response (instead of linear sensitivity increase) is also available for the same price.
The TriField Meter comes with a one-year warranty and a 9-volt transistor battery included. This type of battery lasts about 10 hours (total measurement time). When the BATTERY TEST reads low, the battery can be replaced with any rectangular 9 volt transistor or alkaline (which lasts about 50 hours) type. This meter is manufactured in the USA. TriField is a registered trademark of W.B. Lee.
USING THE TRIFIELD METER
A knob on the front has six positions: OFF, BATTERY TEST, two MAGNETIC field sensitivities (0.5-100 milligauss at 60 Hz, and 0.2-3 milligauss at 60 Hz, the second sensitivity to measure weak fields more accurately), ELECTRIC field and RADIO/MICROWAVE power density. The meter face is analog (needle type). A needle reading of one-third of full scale corresponds to either 3 milligauss (or 0.6 milligauss) @ 60 Hz, 3 kilovolts/meter @ 60 Hz, or 0.04 mW/cm2 respectively in the magnetic, electric, and radio/microwave field settings. Average magnetic field strength in North American homes and offices is 1-3 milligauss, so the meter is labeled "HIGH" above these levels.
MAGNETIC FIELD DETECTION
In most homes or offices, some areas are "hot" spots with readings in the HIGH range. Most often, this is caused by magnetic fields, which come largely from unpaired internal wiring. (Contrary to popular belief, power transmission lines and transformers do not generally contribute as much magnetic field as does internal wiring.) Other magnetic sources include video displays, motorized clocks and other equipment, electric blankets and heaters, fluorescent lights and light dimmers, and the transformers that are inside consumer devices. Much of the total field strength is from frequencies that are harmonics or multiples of 60 Hz (120 Hz, 180 Hz, etc.) and 17,000 Hz of video displays. Cars (especially near the front floorboard of electronic ignition cars) and motorcycles have fairly strong fields that are at frequencies higher than 60 Hz. Magnetic field is difficult to shield, but sheet steel is somewhat effective.
ELECTRIC FIELD DETECTION
A few areas in most homes read HIGH in the electric field setting. These include areas near improperly grounded equipment, the front of video screens, and fluorescent lights. Most of these fields can be easily shielded using a grounded metal screen or foil; VDT screens of this type are readily available. You can greatly reduce the strength of an electric field just by placing your hand in front of the source. This effect can be seen using a TriField meter.
MICROWAVE DETECTION
Occasionally, certain areas read HIGH in the radio/microwave setting. These include door seals around microwave ovens, and cellular phones (but not regular radio phones, which are very low-power). Radio/microwaves can be shielded in the same way as electric fields, although the lower frequency radio waves are not shielded by your hand as easily as microwaves are. (Metal screens will shield both.) In the United States, radars and FM transmitters can legally expose residents to moderately high power levels (as high as 10 mW/cm2 briefly or .57 mW/cm2 near cellular towers), but such exposure is not common.
REDUCING FIELD EXPOSURE
Some equipment is sensitive to magnetic fields (ie, a high resolution color monitor may not function properly above 30 milligauss). By seeing "hot" spots in your home and office, you can move equipment or furniture to reduce exposure. If a room has a "hot" spot, fields are generally much weaker elsewhere in that same room. |
120.99 |
View |
|
RF3 Air-Tube Headset Hook - 5.5 Inches
CLICK
HERE for RF3 Air-Tube Headset EarBud - 5.5 Inches
Developed with "AirCom" Technology to keep harmful radiation away from your head. This technology utilizes a state-of-the-art SPL enhanced sound chamber which delivers crystal clear sound through an air-filled wireless tube (almost like a doctor's stethoscope). Replace the wire with AirCom(tm) Technology, and the RF3 Headset reduces RF exposure to the head! The RF3 hands free headset is a 2002 CES Award Winner, and it incorporates some of the most durable electronic components available today. The RF3 Cellular Headset is the new standard by which all new headsets will be measured, and has a nice sleek and sophisticated design. The sophisticated Ear Hook is durable, comfortable and RF SAFE!
RF3 Headset Features:
Custom Molded - Lightweight Earpiece
RF3 Lightweight AirCom (tm) Sound Delivery Tube
Tube Clip
State-of-the-art sound chamber with enhanced SPL technology
Tangle-Free Expansion Cord
Optional lightweight titanium ear hook design
fully adjustable and rotate 360 degrees to fit either left or right ear 5.5 Inches
Ten highest-radiation cell phones (U.S.)
All cell phones leak and even if you don't have one of the worst offenders, you should protect yourself and your loved ones by using these EMF cell phone protectors
NOTE:
This headset is only compatible with a standard 2.5 mm jack
|
32.75 |
View |
|
RF3 Air-Tube Headset EarBud - 5.5 Inches
CLICK
HERE for RF3 Air-Tube Headset Hook - 5.5 Inches
The RF3 headset was developed with "AirCom" Technology to keep potentially harmful radiation away from your head. This technology utilizes a state-of-the-art SPL enhanced sound chamber which delivers crystal clear sound through an air-filled wireless tube (similar to a doctor's stethoscope). By replacing the wire with AirCom (tm) Technology, the RF3 Headset reduces RF exposure to the head!
A 2002 CES Award Winner, the RF3 hands free headset incorporates some of the most durable electronic components on the market today. Sleek and sophisticated in design, the RF3 Cellular Headset is the new standard by which all new headsets will be measured.
As cellular phone use increases throughout the world so do concerns about the potential effects of electromagnetic radiation. The RF3 Cellular Headset was developed with these issues in mind.
Sophisticated, durable, comfortable and most important RF SAFE!
RF3 Headset Features:
Custom Molded - Lightweight Earpiece
RF3 Lightweight AirCom (tm) Sound Delivery Tube
Tube Clip
State-of-the-art sound chamber with enhanced SPL technology
Tangle-Free Expansion Cord
Optional lightweight titanium ear hook design
fully adjustable and rotate 360 degrees to fit either left or right ear5.5 Inches
Ten highest-radiation cell phones (U.S.)
All cell phones leak and even if you don't have one of the worst offenders, you should protect yourself and your loved ones by using these EMF cell phone protectors
NOTE:
This headset is only compatible with a standard 2.5 mm jack
|
19.95 |
View |
|
RFS Wire Guard
The wireguard is a reusable radiation suppression clamp-on device similar to a clamshell. This device clamps over the headset wire above the plug that is inserted into the phone. It incorporates a ferrous composition based material which interacts directly with the high frequency energy and suppresses it effectively while allowing the voice signal to pass through to the earpiece unimpeded. The housing is a white or black composite manufactured using nylon resins. FITS ANY HEADSET!
The effect of magnetic material on a conductor
Current flowing through a conductor creates a magnetic field around it. Transfer of energy between the current and the magnetic field is effected through the "inductance" of the conductor - for a straight wire the self-inductance is typically 20nH per inch. Placing a magnetically permeable material around the conductor increases the flux density for a given field strength and therefore increases the inductance.
Wires or cables connected/extending from electronic devices using radio waves (such as cell phones), if not shielded will emit over ambient rf radiation levels. To suppress high frequency rf radiation from interacting with sensitive electronics and biologic systems (cell phone users), we offer a line of clamp-on ferrites suppressors. Our ferrites aim to effectively shield the harmful electromagnetic fields from traveling along computers wires, electric wires and cell phone headsets wires ect.
Using a cell phone with a hands free headset that is NOT shielded will dramatically increase rf radiation exposure to DNA within vital organs . All studies have proven in the likely hood that microwave radiation from a cell phone handset is hazardous. WireGuards help prevent the possible 300% increase in RF Exposure to the brain that can happen when not using a shielded headset!
Ten highest-radiation cell phones (U.S.)
All cell phones leak and even if you don't have one of the worst offenders, you should protect yourself and your loved ones by using these EMF cell phone protectors |
6.99 |
View |
|
RFS Pocket Shield
This shielding is most common for the modern day person on the go, and his or her active lifestyle. It doesn't matter, day or night, elegant or casual, the pocket shield is discrete essential RF Protection no matter what occasion. Just slip it into your pocket or handbag between you and the phone.
Protect Organs Like Kidneys, Reproductive and Liver!
Many cell phone shielding products interfere with reception, along with your cell phones ability to regulate power output. Our Cell Phone Radiation Shields fit any Apparel or cell phone and they do not negatively affect a cell phones performance or battery life when covering only the portion of a cell phone handset that is facing your body. With RFS Shielding you shield what's important, "Yourself"!
If a cell phone is in your pocket or in a handbag against your body you need one of these RF Safe Shields to deflect cell phone radiation. These Pocket shields are super thin pieces of shielding fabric laminated by hand at RF Safe to provide a protective barrier between you and your cell phone. The shield can be cut easy to custom fit any pocket to deflect harmful microwave radiation away from you. Just slip it into your pocket between the wireless device and your body - Its that easy!
RFS Radiation Shields are made with thin proprietary flexible metal strands integrated into a specially treated fabric. The screen fabric is coated before cutting and embedded in clear plastic.
Used as a Laminated shielding fabric it is put into a pocket or handbag. Depending upon the phone style, VELCRO? strips are attached to the phone and shield for keeping protection in place.
The Pocket Shield is made of see-through rf fabric embedded by hand into clear lamination. It's designed to safely carry a cell phone in your pocket or handbag. Just slip it in your pocket between you and the cell phone! It's that Easy!
We recommend you keep the 4x6in shield as large as possible, and trim it only when absolutely necessary for comfort! The more rf shielding between you and a cell phone - The Better!
Ten highest-radiation cell phones (U.S.)
All cell phones leak and even if you don't have one of the worst offenders, you should protect yourself and your loved ones by using these EMF cell phone protectors |
7.99 |
View |
|
STETZERiZER Microsurge Meters
Installation Instructions | FAQs | Graham-Stetzer Research | Product Info
Designed to measure home and office Power Quality
Microsurge Meter Operating Instructions
The intellectual property behind the Microsurge meter belongs to the individual who conceived and designed the meter: Professor Martin Graham. The Microsurge meter:
Works for 60 Hz/120 Volt North American and 50 Hz/240 A.C. Volt European systems.
LCD display reads the Volts per second present, which is an approximation for the high frequency energy. High frequencies are the frequencies which are most harmful to equipment, animals, and humans.
The good, marginal, and undesirable range of meter readings are conveniently listed on the back of the Microsurge meter.
Electrosensitive people have reported sensitivities with readings as low as 27 on the Microsurge meter. However, medium or even low Microsurge meter readings should not be interpreted as a guarantee that there is no harmful health impact; only a medical expert can determine that. Caution is required. Some harmful health effects of high frequency energy on humans appear to be cumulative, and possibly non-reversible. Science is inconclusive in this area, although the body of empirical evidence available for guidance continues to expand and stabilize.
Microsurge Meter Design Criteria
Microsurge meters were specifically deigned as a companion to the STETZERiZER filters. The meters measure the level of harmful electromagnetic "energy" present, and their primary use is to guide effective filter installation. Microsurge meters are low cost, robust, and easy to use by non-technical people. The meters were designed to measure harmonics and other high frequency "energy" present, which are the frequencies most detrimental to human health. The meters effectively ignore the effects of 60 Hz power and other lower, less harmful frequencies. Specifically, the meter measures the average magnitude of the changing voltage as a function of time (dV/dt), which naturally emphasizes transients and other high frequency phenomena that change rapidly with time. The measurements of dV/dt read by the meter are defined as G-S (Graham-Stetzer) units (since no standard term is available). The G-S units are a measure of "harmful energy" which is a function of frequency, or more generally, rate of change of voltage or dV/dt.
Using the Microsurge Meter for a Typical Home Installation
Microsurge meters measure the levels of safe, borderline, or dangerous levels of "energy" present. These levels are conveniently shown on the back of the meter for reference. These levels have been developed through research (much of it in Russia and neighboring countries) and confirmed by experience in North America. The levels have been adopted by the Sanitory Stations (Health Departments) of the Republic of Kazakhstan.
Starting from points that typically have the highest readings such as the power input panel, computers, and televisions, the meter is used to measure the initial levels of G-S energy and reduction as filters are added. Once the G-S levels are acceptable at one location, the process should be repeated at the next location. After the installation of the filters is complete, a final confirmation of the G-S levels should be performed throughout the house.
Meter Characteristics
1 in. x 2.75 in. x 4.25 in.
Encased in an off-white plastic covering that fits naturally with home or office decor
Certified by the Government of Kazakhstan as the official means of measuring RF Energy on building wires
Simply plug into a normal electrical outlet to use
Testimonial
NOTE:
This is a Custom Order Item and is not returnable as per our return policy.
"I highly recommend this system for your home and office. I used the meter in my bedroom and found that the radio waves were 11 times the safe level. With the use of the meter I placed filters thru-out the residence and my levels went down to acceptable. I now sleep a full 8 hours from my previous 6 or less and wake up refreshed with my breathe full and in a more relaxed state.
I have never been so impressed with a product before and have become become a major distributor of this system."
Signed Rick Henry,
owner of HealthStores.com
Installation Instructions | FAQs | Graham-Stetzer Research | Product Info |
100.00 |
View |
|
STETZERiZER Filters - For home, office, schools and industrial applications
Installation Instructions | FAQs | Graham-Stetzer Research | STETZERiZER Microsurge Meters
For home, office, schools and industrial applications
A new application of existing science and technology designed to improve power quality in home and office environments
System Overview
The STETZERiZER filter is based upon 100 year-old science and power engineering principles. Newly introduced is the design, which is focused on the needs of the customers in homes, offices, schools, etc. Filters have been extensively applied for decades by industrial users and the electric utility industry itself. The STETZERiZER filter is designed to filter harmonics and other high frequency current (trash) from the electrical environment, thereby reducing the potential for leakage into the human environment and creating additional trash in non-liner loads (televisions, computers, variable frequency drives, energy-efficient lighting, etc.).
The high frequency current (trash) on the neutral wire in the electrical system is positioned to return directly to the power system via the feeder neutral to the substation, and possibly beyond. However, as is often the case, the utility feeder neutral is not adequately sized (as required by the Public Service Commission of Wisconsin). If this is the case, much of the return current will flow through the ground rather than the feeder neutral. Under these conditions, the STETZERiZER filters still provide benefits; this should be seen as local mitigation rather than part of a complete solution that requires an adequately sized neutral return.
At 60 Hz the filters act as capacitors and normally marginally improve the power factor of the customer load, which are normally slightly inductive.
Typical Home Installation
Filters are designed to be installed throughout the home in a pattern that corresponds to the distributed nature of the need. For example, installing two filters close to a desktop computer or a television is normally appropriate and effective. Installing filters, normally from two to six, close to the input power panel is recommended to address high frequency currents entering on the power lines. The total number of filters required depends on the size of the home, the amount of electrical equipment, and the quality of the power from the grid. Twenty filters are normally adequate for a "typical" house.
Installing an inadequate number of filters tends to result in overloaded filters, leading to an ineffective solution. The preferred installation method is to be guided by the STETZERiZER Microsurge Meter, which measures the amount of high frequency energy present. Readings of 30 or lower indicate an acceptable environment, while readings of 50 or higher indicate a need for additional filters. Readings between 30 and 50 are marginally acceptable, but should be reduced if anyone in the area is electrically sensitive.
The reader is encouraged to review the STETZERiZER Microsurge Meter Product Description, the STETZERiZER Filter Installation Instructions, and the STETZERiZER Filter Frequently Asked Questions.
Filter Characteristics
2 in. x 2 in. x 4 in.
Encased in an off-white plastic covering that fits naturally with home or
office decor
Fits into a normal home or office electrical plug
Certified by Underwriters Laboratories and the Canadian Standards Association
as safe for home and office use
NOTE:
This is a Custom Order Item and is not returnable as per our return policy.
Testimonial
"I highly recommend this system for your home and office. I used the meter in my bedroom and found that the radio waves were 11 times the safe level. With the use of the meter I placed filters thru-out the residence and my levels went down to acceptable. I now sleep a full 8 hours from my previous 6 or less and wake up refreshed with my breathe full and in a more relaxed state.
I have never been so impressed with a product before and have become a major distributor of this system."
Signed Rick Henry,
owner of HealthStores.com
Buy 15 filters for $448.95
Most houses use approximately 12 to 15 filters and any unused filters can be given to your friends.
Installation Instructions | FAQs | Graham-Stetzer Research | STETZERiZER Microsurge Meters |
30.00 |
View |
|
Cook's Pocket Diode
For individuals who are exposed to minimal low-level radiation. - (1"x 1"x 1/2")
The Amazing Diode
What our customers say |
15.99 |
View |
|
Cook's Slim Diode
A thinner version of the Pocket Diode, the slim design of this Diode allows it to fit easily into a billfold. Carry in left pocket. - (2 1/8"x 1 1/8"x 1/8")
The Amazing Diode
What our customers say |
18.49 |
View |
|
Cook's Fixture Diode
For fluorescent lights and small electrical office equipment. Double-faced tape affixed to the Diode allows quick and easy application. - (2" x 1 1/8" x 1/4")
The Amazing Diode
What our customers say |
19.49 |
View |
|
Cook's Equipment Diode
The Equipment Diode is stronger and more effective on larger equipment. Double-faced tape affixed to the Equipment Diode allows quick and easy application to x-ray equipment, microwave ovens, televisions, and computers. If you wear this Diode, remove the sticky tape. - (2 1/8"x 1 1/8"x 1/4")
The Amazing Diode
What our customers say |
20.49 |
View |
|
|
Cook's EconoPak
Now you can have the Slim Diode (B), Fixture Diode (C), and Equipment Diode (D) at this very special price.
The Amazing Diode
What our customers say |
57.95 |
View |
|
Cook's Black Onyx Diode
The round solid Black Onyx Circle is the size of a quarter. There is a 1/2" hole drilled in the middle which holds the Diode Formula.
The Amazing Diode
What our customers say |
59.95 |
View |
|
Cook's Silk Pouch
A silk pouch for carrying your Diode. Diode not included.
The Amazing Diode
What our customers say |
1.99 |
View |
|
Digital Appliance Diode
This can also be used on Laptops, the Blackberry, Smart phones, MP3 players & Video Games
The Appliance Diode is easily applied by removing the paper backing on the adhesive and pressing to a flat surface of the appliance. We have boosted our Diode Formula to give a better range of frequency protection from digital equipment.
This high powered Digital Appliance Diode offers a broader range of protection in the higher frequencies which are present in today's modern digital appliance equipment.
1 inch Size fits Any Appliance
All New Round Slim Design
Improved Adhesion
Use the Appliance Diode on the Following:
Computers and Accessories
Kitchen Appliances
Microwave Ovens
Florescent Lights
Televisions
Large Electrical Appliances
Electrical Tools
Etc.
The Amazing Diode
What our customers say |
29.95 |
View |
|
Digital Cell-Phone Diode
NEW & IMPROVED
The Cell-Phone Diode is easily applied by removing the paper backing on the adhesive and pressing to a flat surface of the cell-phone or appliance. We have boosted our Diode Formula to give a better range of frequency protection from digital equipment.
This high powered Digital Cell-Phone Diode offers a broader range of protection in the higher frequencies which are present in today's modern digital equipment.
1/2 inch Size fits ALL Phones
All New Round Slim Design
Improved Adhesion
The Amazing Diode
What our customers say |
36.95 |
View |
|
Single Axis Digital Gaussmeter
Couldn't be easier to use, just turn it on and get accurate reliable readings. Perfect for situations needing high resolution measurements of AC magnetic fields without spending a lot of money. Large LCD display reads 0.1 -199.9 mG over the ELF range of 30 - 400 Hz. Provides readout in both mG and microTesla. Calibrated to within 4% ? 3 digits at 50/60 Hz. This single axis meter samples every 0.4 seconds when flipped on with slide switch. Requires one 9V battery. One year limited warrantee.
Like all single axis meters, this meter must be rotated during use to find the proper orientation to the magnetic field being measured to get proper readings. |
79.95 |
View |
|
RF Signal Analyzer
This powerful tool has it all: frequency counter, spectrum display, and
RF intensity. Scan the entire frequency range from 100 kHz all the way
up to 2060 MHz! Want to know if cell phones are operating in your area?
Look at the frequency spectrum, then tune in to the 800 MHz or 1900 MHz
band to track signal strength. Want to know how much radiation you are
receiving from a broadcast tower? How well does your shielding work for
different frequencies? What sort of RF noise are you getting from your
computer? If you ever wanted to analyze the mixture of RF signals in
your environment, this is the unit for you. Only 9" x 4", this battery
operated unit is self contained and only 1.4 lbs. Has a built in
speaker for audio monitoring of the signals. Simple on-screen menu
selection of functions. Screen is back-lit and capable of spectrum,
bargraph, and digital display. Includes detachable antenna for
broadcast signals, (use an optional F to BNC adapter for measuring
signals in co-axial cable) and even has RS-232 output with PC software
and cable so you can load and manipulate data on your computer! One
year mfr. warranty.
FREQUENCY
DISPLAY
Range: 100KHz - 2060MHz
Step: 5KHz - 6MHz in multiple of 5KHz
Accuracy: +/- 25PPM
Measurement units: dBm & dBu
Attenuation: 0dB - 60dB
Level Measurements:
- Intensity range: -10dBm to 40dBm
- Resolution: +/- 0.5dBu
- Accuracy: |
1895.00 |
View |
|
RF Detector Probe
A very sensitive RF detector probe which attaches to your digital multimeter
(banana jacks) and provides a DC voltage output from weak RF signals.
Allows easy tracing of low level RF signals that a counter may not pick
up. Wide frequency coverage, output is nearly linear from 100 KHz to
1000 MHz. Use the handy E-Z Hook "Grabber" tip to track down unwanted RF sources
in circuits or hold it in the air as an RF field strength meter! Uses
exotic low barrier microwave detector diodes to give exceptional
sensitivity (down to microwatt levels). A great inexpensive way to
check for RF. Max RF iput: 100 mW (2.23 V into 50W). Max DC input: 50
VDC. 90 day manufacturer warranty. Made in USA.
|
29.95 |
View |
|
ELF Zone
What
this meter lacks in resolution it makes up with ease of use and very
low cost. Will measure ELF/VLF magnetic fields in the frequency range
of 20 - 10,000 Hz, with a minimum sensitivity of .25 mG. Laboratory
tested and documented for accuracy.
Three LED lights signal field strength:
0 - 2.5 mG ("safe")
2.5 - 7 mG ("caution")
8 or more mG ("danger")
Single axis sensor, on/off toggle switch. One fresh 9V battery
required. Useful for preliminary surveys of home, car, or office. |
12.95 |
View |
|
Plus Gaurd
Use it to check for cell phone activity, concealed
bugging devices, RF microwave oven leakage, shielding performance,
check the strength of RF remote control units for toys and models,
science projects, etc. Small enough to hang on your keychain and so
simple a child could use it.
A Yellow Light will stay illuminated if a transmitter has not been detected.
The Orange Light will illuminate when the +Plus Guard detects weak radio waves from an RF transmitter.
The Red Light will illuminate within a few feet of the
transmitter, then flash along with a low audio alarm within a few
inches of the transmitter as the signal gets stronger.
The unit can be used as is, plus two external antennas are provided for
extended sensitivity. Tuned to be especially sensitive at 460 MHz, 900
MHz, and 2.4 GHz which are common bugging frequencies, but it will
respond to a much wider range. No further frequency/response or
sensitivity data is available. 90 day mfr. warranty. Made in USA. |
42.95 |
View |
|
Broadcast Frequency Counter
Want to know the frequency of RF sources
such as cell towers, TV and radio stations? The Broadcast Frequency Counter is an excellent
economical choice for 2 big reasons: it offers both a frequency counter
and bargraph type field strength meter. 10 digit display gives plenty
of information about the predominant incoming frequency and the very
low ( |
269.00 |
View |
|
Compass
Looking for the cheapest way to determine if something is magnetized?
Want a simple device for comparing magnets? Doing a school project?
Lost? For hundreds of years, mankind has used the trusty compass to
guide him through the Earth?s magnetic field. Measure the deflection of
the needle from magnetic North at known distances using this nice 1-3/8
inch diameter compass to quantify and compare DC magnetic fields, track
down magnetized components, or evaluate magnetic shielding performance.
Much cleaner than iron filings. Makes a great science fair project too.
Includes a loop for your keychain, charm bracelet, or necklace. Compass
must be held horizontally to operate.
|
2.50 |
View |
|
UV Meter Card
With the depletion of the ozone layer, the number of skin C and
other health problems has risen dramatically, and the public is being
advised to avoid prolonged exposure to the sun. But on any given day,
how much exposure is too much, and how much SPF protection is enough?
The credit card sized UV Meter Card is designed
with a remarkable UV sensitive strip which changes from white to a
shade of purple when exposed to UV radiation for only 20 seconds.
Designed to react primarily to the wavelengths of lights between
290-325 nm, (the UV range) which are known to be the sunburn and skin
damaging rays. The stronger the radiation, the darker the shade of
purple. Simply compare on the adjacent color matching chart to see the
corresponding "likelihood of sunburn" warning. Guidelines printed right
on the meter card allow the user to determine the sun-screen SPA level
required under the prevailing conditions.
You can now take immediate measurements to
ensure that you are protecting the health of your family, friends, and
associates. The card will change back to its original color within
minutes and can be reused hundreds of times. Great for days at the
beach, camping, boating. outdoor sports, and perfect for anyone who
works outdoors. Ask your employer to make them standard issue.
Bonus: Each card comes with a "Lens Tester Spot" This second meter reacts to
wavelengths up to 400 nm (both UVA & UVB) and is used to test the UV protection of
eye wear, garments and fabric. |
3.95 |
View |
|
|
Telescoping Antenna
|
15.00 |
View |
|
|
BNC (Male) to 'F' Female Adaptor
|
4.95 |
View |
|
Digi-Field Meter
Measuring radio frequency and microwave
radiation has never been easier! This unit covers the amazing range of
DC - 12 GHz and will give you digital readout of the relative field
strength of broadcast signals such as cellular phone, microwave oven
leakage, TV station, CB radios and even radar using the
telescoping antenna
provided. Can even be used to measure 60 Hz signal from
powerlines and wiring. Even use it as an RF safety monitor! Adjusting
the length of the antenna will affect the signal gain.
Can also be used to make relative power measurements (and determine
power loss) of single frequency coaxial sources such as cable TV, and
with simple adapters, this meter may also be connected directly to any
receiving antenna to measure signal strength while the antenna is
tuned, modified or repositioned.
Large 3? digit LCD or LED readout is easy to see, even in poorly lit
locations and from safe distances. Only 3" x 4" x 1?", this is the best value for checking high frequency
radiation sources, tuning or modifying broadcast antennas, or testing
the effectiveness of your RF shielding. Powered by a standard 9V
battery which is included.
|
249.95 |
View |
|
|
BNC-BNC 36 inch cable
|
4.95 |
View |
|
|
Power Line Probe
|
295.95 |
View |
|
|
Power Line Probe
|
315.95 |
View |
|
Pocket Magnetometer
DC magnetic fields can develop in many steel or iron objects if they
have been exposed to magnetic fields, current, or friction. Even
structural members in homes and barns have become magnetized due to
stray voltage. This hand-held device detects residual magnetism in
steel parts quickly and accurately. Simply place the test edge near or
against the object being tested, and the needle gauge points to a
reading representing the magnetism in the object at that site as well
as polarity. Will also verify thoroughness of de-magnetizing. Check out
your car, bed frame, desk furniture or any other metal objects you
spend time with. Can also be used to check the strength of magnets.
Two models in stock: -20 to +20 and -100 to +100 Gauss. |
39.95 |
View |
|
AC/DC Gaussmeter
If you have a need to measure strong magnetic fields from DC to 5 kHz,
this is the unit to do it. Large 3? digit display and highly accurate
(?5%) hall effect, this is a great meter for comparing and classifying
magnets, checking cargo for air shipments, measuring residual magnetism
in steel or iron, evaluating magnetic shielding effectiveness, or even
checking AC fields from transformers, motors, and distribution centers
where current use is high. Includes 6 foot long cable with transverse
probe. Made in USA. 1 year mfr warranty.
Range: ?1-1000G DC, 1- 700G RMS
Resolution: 1 Gauss
Bandwidth: DC to 5 kHz
Accuracy: ?5%, traceable to NIST
Meter Size: 2.3"W x 4.75"L x 1.0"D
Probe Size: 3.5" L x 0.25" D
|
526.00 |
View |
|
ElectroSensor
With the push of a button, this simple and accurate gaussmeter measures the level of
magnetic field emitted by all common electrical appliances and equipment. An easy to read
10 LED light bar scale gives readings from 1.3 to 30 mG in small increments. The
ElectroSensor has a detection range of 50-60 Hz with an accuracy of ?3dB. A pickup coil
in the tip of the unit can be rotated for increased directionality. EMF risk can be avoided if
you know where it is. If you are looking for a low cost, user-friendly meter, here it is!
AAA battery included.
|
24.95 |
View |
|
|
Radiological Survey Meter
|
99.95 |
View |
|
Natural EM Meter
The Natural EM Meter detects radio/microwaves and changes
in extremely weak static (DC or "natural") electric and magnetic
fields. Using both a needle type meter and audible tone, it detects:
radio transmitters, geomagnetic storms, unusual magnetic solar
activity, electrical activity of thunderstorms, leaky microwave ovens,
magnetized rocks or bed frames, analog cellular phone EMF output, and
concealed surveillance bugs. Because it can sometimes detect the
electrical presence of a person, this versatile meter can even be used
in paranormal studies. Sensitive to changes in electric fields of as
little as 3 V/m with a full scale deflection at 1000 V/m. Will measure
magnetic field changes as small as 0.5% of the Earth's magnetic field
(2.5 mG) and as high as 100 microtesla (1000 mG). RF sensitive down to
0.01 mW/cm?, with a full needle deflection at 1 mW/cm? over the
frequency range of 100 kHz to 2.5 GHz.. 9v battery included. One year
manufacturer's warrantee.
|
199.95 |
View |
|
AC Electric Field Meter
Providing RMS electric field strength
readings over the frequency range of 5 Hz to 2 kHz, this handy meter
does what no other meter in this price range can do. Two switchable
ranges. Range 1 offers 20 V/m accuracy from 20 to 300 volts/meter and
range 2 offers 0.1 kV/m accuracy from 0 to 10 kilovolts/meter. Simple
to use, just set the dial to the desired range and take readings.
Operates on a 9V battery which is included. Has a large analog display
and comes with a complete 1 year warrantee.
As with any E-field sensing instrument, you
will find that your readings are more accurate if you do not distort
the ambient field with the presence of your body. Simply placing the
meter on a stable (non-conductive) surface and backing away, or taping
the meter to a 2 - 3 foot stick will allow you to move your body far
enough out of the way to avoid distortion.
Now you can have accuracy in E-field measurements and affordability. Made in USA. |
169.95 |
View |
|
Digital Electric Field Meter
This has got to be the easiest hand held meter to use for measuring AC
electric fields accurately. Just turn the switch on and take your
readings. 4?-digit readout is in V/m. Sensitive from 1 - 19,999 V/m. 2%
accuracy from 40 Hz to 20 kHz, but can be used up to 100 kHz. 9V
battery included. One year mfr warranty.
|
199.95 |
View |
|
Switchable 1:3 Axiss Gaussmeter
Compact and easy to use, this digital unit can measure ELF and/or VLF
magnetic fields in either single axis mode (to help identify the
orientation of the field) or 3-axis mode (which makes routine
measurements much faster and more reliable). Range from 0.01 mG to 1999
mG. 3? digit display. 3% accuracy from 45 to 5000 Hz but useful from 13
Hz to 75 kHz. Very simple: One knob controls range, one knob for single
or 3-axis, and one on/off switch. Uses standard 9V battery (included).
Made in USA, with NIST type certification. One year mfr warranty.
|
279.00 |
View |
|
Tri-Field Extended Range Broadband Meter
This modified version of the standard Trifield Meter has the following advantages:
? The magnetic field sensor has enhanced sensitivity to frequencies below 50Hz
(for example, sensitivity at 5 Hz is 33 times greater than the regular Trifield meter)
? The RF sensor is frequency-flat over the extended range of 100 kHz - 2.5 GHz.
This fills the gap of 100 kHz - 50 MHz missed by the regular Trifield meter
(However sensitivity is shifted to a range of 0.026 - 260 mW/cm?)
SPECIFICATIONS
Minimum
Sensitivity
Scale
Accuracy
Frequency Range
Magnetic 1:
1 mG
0-100 mG
? 20%
5 Hz - 100 kHz
Magnetic 2:
0.2 mG
0-3 mG
? 20%
5 Hz - 100 kHz
Electric:
10 V/m
0-1000 V/m
? 30%
5 Hz - 100 kHz
RF/Microwave:
0.01 kV/m
0-1 kV/m
Factor of 2
at 2 GHz
100 kHz - 2.5 GHz
With these extended ranges, you can detect slow moving static
electric and magnetic fields, concealed RF transmitters, cellular phone
radiation, very weak AC electric fields from wall switches and
concealed wiring, and lots of other low frequency EMF sources you might
have missed, as well as fine tuning your shielding efforts!
|
189.95 |
View |
|
Air Ion Counter
This hand-held ion counter possesses the same sensitivity (down to 10 ions/cm?) as meters
costing far more. Fully electrostatically shielded, with a fan throughput of 200 cm?/sec, it
can make accurate readings even in adverse conditions. Measures positive and negative
ions separately. Use it to measure the ions generated from electrical storms, water spray,
radioactive decay, corona discharge from high tension wires, even check the
effectiveness of your ion generator! Made in USA with a 1 year warranty. 9-volt
battery included.
Setting Time: 10 sec
Noise level: 10 ions/cm?
Accuracy: ?25% for fast ions
Ion selectivity (crosstalk): 20x
Range: 10 - 1,999,000 ions/cm?
|
499.95 |
View |
|
|
DC Voltage Output Accessory
|
55.00 |
View |
|
|
Additonal Probe for DC Magnetometer
|
99.95 |
View |
|
Socket Tester LE-452
|
14.95 |
View |
|
ScanProbe
Want to know
what parts of your cell phone are the strongest radiation emitters?
Want to know how effective a cell phone shield is? Want to know which
component of your RF emitters to shield? ScanProbe is the most
versatile, affordable, and handy instrument for detecting, locating and
measuring NEAR FIELD electromagnetic emission.
ScanProbe will help you to reliably predict EM behavior of a product
and to locate emission sources in a matter of seconds. It detects the
presence of an electromagnetic field and provides audio and visual
indication of relative field strength. ScanProbe can pinpoint exact
sources of emission down to a single trace or component. It is completely self-contained, powered by 2 AAA batteries and
fitting into your shirt pocket, the ScanProbe offers a green/yellow/red
5-LED light bar and audible tone which changes pitch with field
strength. Includes squelch feature which allows you to adjust the
instrument's sensitivity. Frequency response: 2 MHz to 2 GHz, electric
field.
|
199.95 |
View |
|
|
ScanProbe-C
ScanProbe-C will help you to reliably predict EM behavior of a product
and to locate emission sources in a matter of seconds. It detects the
presence of an electromagnetic field and provides audio and visual
indication of relative field strength. ScanProbe-C can pinpoint exact
sources of emission down to a single trace or component. It is completely self-contained, powered by 2 AAA batteries and
fitting into your shirt pocket, the ScanProbe offers a green/yellow/red
5-LED light bar and audible tone which changes pitch with field
strength. Includes squelch feature which allows you to adjust the
instrument's sensitivity. Frequency response: 2 MHz to 2 GHz, electric
field.
Want more data? ScanProbe-C operates as either a stand-alone probe or connects to an
RF Signal Analyzer
to become the best-performing near-field probe in the industry.
ScanProbe-C has a low-noise amplifier built-in. It provides strong
broadband output signal that allows you to see what you have been
missing using passive probes. As an ultra-wide bandwidth, non-contact
voltage and current probe for an oscilloscope, ScanProbe-C probes will
reveal previously invisible transients. As an EM field probe for a
multimeter, ScanProbe-C probes provide DC voltage that is a function of
the field strength (BNC to banana plug adapter required). One year mfr.
warranty. Made in USA.
ScanProbe-C includes:
1 Electric field probe. Frequency response: 2 MHz to 2 GHz
1 Magnetic field probe. Frequency response: 1 MHz to 1 GHz
Six-foot SMB/BNC cable
Heavy duty plastic case, user's guide, and batteries
|
695.00 |
View |
|
Smart Fieldmeter
RF Electromagnetic field monitor combining the major features of
professional quality equipment (compare to Narda and Holoday) with
convenience and simplicity for users on a budget. Direct E-field
readout in calibrated V/m with 4 ranges:
2 (min sensitivity is 0.2), 20, 200, and 600. Covers frequencies from
200 kHz ? 3 GHz.
Multimode (Average, Peak and Pulse) operation
allows monitoring of the sinusoidal or modulated fields by displaying
the average or peak values. Portable lightweight design with long
lasting battery and detachable isotropic probe offers convenience in
the field. Or mount the probe on the included tripod and use it
with/without remote output monitoring (200 mVDC into 1 MOhm, full
scale) to facilitate datalogging, PC interface, or laboratory
applications.
Dynamic range: 0.2 -600 V/m (10 nW/cm? - 95 mW/cm?).
Linearity deviation: less than 1.5 dB (any range 10-120% of full scale).
Omni directional (Isotropic probe).
Frequency range: 0.2 MHz-3 GHz.
Operating modes: Average, Peak and Pulse.
Auto zeroing.
Warranty 1 year. Made in USA.
Includes:
NIST traceable calibration certificate, CE mark
Hard Case with custom foam insert
5 foot cable to connect probe to meter
6 foot remote monitoring cable (dual banana) can be used with
Extech DMM with PC interface
Plastic probe tripod
9V battery (~100 hours usage)
Manual
|
3300.00 |
View |
|
Electrical Sensitivity Diagnotic Kit Adapters
Adapters Include:
USA flat plug
British square plug
Australian flat plug
European 4mm round plug
simple carry case
Note, you may also need a 240V to 120V transformer.
|
10.00 |
View |
|
Magnetic Pickup
Want parts to build your own gaussmeter? Here is an AC magnetic field
probe. It generates an AC voltage when exposed to AC magnetic fields.
The greater the magnetic field, the higher the voltage generated (at 60 Hz, it produces about 1 mV per 20 mG). It
can be connected to a DMM, analog voltmeter, oscilloscope, audio
amplifier (see below), or recording device. Connect 3 of them in series
and create a 3-axis unit. It is quite small: only 0.7" long x 0.7"
diameter, with a removable rubber suction cup attached. Has 36" lead
and 1/8" (3.5 mm) mono plug.
|
4.95 |
View |
|
Audio Amplifier
Connects to Magnetic Pick-up (above) for audio translation of AC
magnetic field frequency and intensity. Makes finding sources of AC
magnetic fields very easy. Listen carefully to hear the hum of 50 or 60
Hz, plus clicks, pops, and shrill tones of harmonics, surges, and
"dirty" power. Volume is adjustable. Even has an output where you can
connect earphone or external speaker. Input: 1/8in stereo. Requires 9V
battery.
|
16.99 |
View |
|
Automobile DC-DC Adapter
Very versatile adapter plugs into the cigarette
lighter of your car. Delivers 1.5, 3, 4.5, 6, 7.5, or 9 VDC power. Six
different output plugs: 0.09 and 0.13 inch phone plugs; 0.06, 0.08, and 0.09
inch coax plugs; and our favorite: a 9V battery snap. Has a 6 ft long
cord and polarity reversal switch. Delivers 500 mA so you?ll have
plenty of power for EMF meters or other devices. Save your
batteries!
|
9.95 |
View |
|
Flexable Rod, Sync and Instruction Booklet
The flexible Rod is 24" in length and acts as a simple antenna to check the amplitude of the biomagnetic aura and the energies flowing in and through the body. It is used as a readout device for checking the energies emanating from all things. The Rod is also used in conjunction with the Discharge Synchronizer to remove or discharge conflict energy, such as pain and toxicity, from the body. The Discharge synchronizer is a small box (2 1/8" x 1 5/16" x 1") and has 347 different toxic frequencies. The "Sync" works by synchronizing with a conflict energy to be drawn or removed from the body. |
44.95 |
View |
|
UltraSensitive Wideband RF Meter
This is one sensitive puppy! Designed to sniff out even the tiniest RF
transmitter, it will catch everything from 1-2500 MHz. Analog readout
on a relative scale makes direction finding fast and easy. Simply hold
the unit horizontally and point the built-in telescoping antenna in the
direction of the suspected source. Sweep 360? to find what other RF
sources may be present. Can differentiate between distance sources such
as towers and nearby sources such as surveillance bugs and cell phones.
Adjust gain with the length of the antenna and the sensitivity
adjustment control. Complete with instructions and 9V battery. Made in
USA.
|
169.95 |
View |
|
Hygro-Thermometer Clock
Great for monitoring weather or paranormal fluctuations.
Clock display with alarm
Temperature and Humidity Min/Max displays
Settable high/low limits
Humidity: 25% to 95%
?5% accuracy
Temperature: 14 to 122?F (-20 to 50?C)
?1.8?F/1?C accuracy
Includes built in stand and wall mounting bracket. Uses one AAA battery, included.
|
29.00 |
View |
|
Deluxe Digital Multimeter
An amazing meter at an amazing price. 3? large, easy-to-read 0.7" characters to rate DC
volts and current, AC volts and current, resistance, even Diode and Transistor tests.
Includes battery, test leads, case, and instructions.
Most important feature: the all important 0 - 200 mV AC range so
it can be used with the Body Voltage Sensor, and all magnetic field
probes listed.
|
49.95 |
View |
|
Digital Sound Level Meter
Features:
Tripod mountable and battery powered, ideal for field use
Analog output for connection to chart recorders, dataloggers, etc.
Selectable weighting (?A? or ?C?) and response time (Fast or Slow)
MAX HOLD front-panel select switch locks highest reading on the display
Complete with 4 AAA batteries
3-1/2 digit LCD display with 0.1 dB resolution
30-segment analog bargraph
Measure sound level from 40 to 130dB
Built-in 0.5" Electret Microphone for convenient one-hand operation
Complete with wind screen
Applications:Identify noise ordinance violations, traffic noise
measurements, community noise measurements, theater acoustic studies,
stereo balancing.
Specifications:
Range: 40 to 130dB
Measurement Bandwidth: 300 Hz - 8 kHz
Accuracy: ? 2dB
Weighting: ?A? and ?C? (Selectable)
Response time: FAST and SLOW (Selectable)
Microphone: 0.5" Electret Condenser type
Analog output: AC: 0.707Vrms
Power Supply: 4 AAA Batteries
Dimensions: 9 x 2.3 x 1.7" (230 x 57 x 44mm)
Weight: 6oz. (172g)
|
89.99 |
View |
|
Magcheck 95 Sensor
Single axis magnetic field sensor, can be used with any good digital
multimeter (for low scale accuracy, your DMM must have a 200 mV AC
setting or 0.1 mV resolution) which accepts a dual banana jack.
Produces 1 mV AC per mG up to 50 Gauss. Highly accurate over the range
of 25 - 3000 Hz. Two foot shielded cable with dual banana jack
included. Our most accurate probe. Calibrated to 5% accuracy, NIST
traceable. 1 year warranty (Digital Multimeter not included)
Bonus!
Use your computer with this probe to make an ELF/VLF spectrum analyzer (with optional free software)!
Connect this probe to your PC's microphone jack with cable listed below
to provide spectrum analysis of the output up to about 20 kHz. You can
even add the
Audio Amplifier
to boost weak
signals. This has to be the lowest cost way to get frequency
information about your magnetic fields. Explore the mixture of
frequencies commonly associated with common household sources,
demonstrate harmonics, even compare shielding effects at various
frequencies.
|
135.00 |
View |
|
Electric Field Sensor
Antenna-type attachment for DMM which measures electric field in V/m
& kV/m. Because electric fields occur whenever a voltage difference
occurs, you can detect electric fields from appliances which are
plugged in even if they are switched off. Unit produces 1 mV per V/m
with 20% accuracy. Check outlets and electrical cords, especially in
the bedroom. This sensor will determine the effectiveness of your
electric shielding devices, and assist greatly in positioning your
furniture. You will need a DMM which accepts banana jacks with 3/4"
spacing. (DMM sold separately).
|
50.00 |
View |
|
Body Voltage Sensor
An external electric field will induce an electric field within our
bodies. In this sense, our bodies act as antennas picking up fields
from electric blankets, alarm clocks, powerlines, and just about
everything connected to a source of electric power, whether it is
switched on or not. Delicate biological cellular processes (like brain
function and heart muscle contraction) operate on the scale of
microvolts to millivolts. Some experts warn against induced voltages of
20 mV or higher as they can theoretically interfere with the subtle
cellular activity. Simply touch this sensor with a finger and know
instantly what effect external fields are having inside your body
(where it counts!). Will help you detect irritating sources of electric
field which may not otherwise be obvious. (Digital Multimeter sold separately).
|
45.00 |
View |
|
Electrostatic locator
Measures static charges from zero to 30,000 volts
Designed for close and repetitive readings
Uses standard 9 volt battery with battery test feature
Low drift, Repeatability + 1%
Unique Quick Zero function which instantly re-zeros the instrument and provides ground compensation for the user
Analog output indicates amount of charge and polarity
Accuracy ?10%
Size: 4-3/8 " X 2-5/8" X 1-5/16"
1 year warranty. Made in USA. |
410.00 |
View |
|
Surface Resistivity Meter
When you need to know how conductive a surface is, use this wide range
hand-held meter. Measures both surface resistivity and resistance to
ground with a test range of 103 - 1012
ohms per square (10 LEDs). Exceptionally easy to use and priced for
economy. Carry case included. Uses standard 9V battery (included). 1
year warranty. Made in USA.
? CE approved? Simple, repeatable measurements of
Conductive, Static Dissipative and Insulative surfaces by the ASTM
standard D-257 method of parallel bar sensing
? Checking resistance to ground is as easy as inserting the ground cord into the ground socket
? Weight: 6 ounces
? Size: 5" x 3" x 1"
? Accuracy: ?? decade
|
420.00 |
View |
|
Extech Data Logging DMM with PC Interface
Amazing low price on this versatile digital multimeter! You can use it
as a stand alone or connect it to your PC with the built in RS-232C
serial interface to collect and analyze long term data on AC/DC voltage
(0.01mV -1000V), AC/DC current, Resistance, Frequency (0.001 Hz -
125kHz), Capacitance and Diode test! With optional magnetic field
probes or electric field and body voltage sensors, measure electric and
magnetic field strength and frequency over time. Can also be used with
Geomagnetometer or DC Gaussmeter to measure permanent magnets. Includes
powerful Windows based software which allows users to determine
sampling rate, set HI/LO audible alarms, display data in digital,
analog, and graphic formats. Requires only 4MB of computer memory.
1-year mfr. warrantee.
|
299.00 |
View |
|
|
Combination Detector
|
19.95 |
View |
|
Infra Red Thermometer
Infra-Red (IR) is a type of EMF we don't hear much about... but you
know it when you feel it! This pistol-grip remote infrared thermometer
(with laser pointer for pinpoint accuracy) will measure temperatures
from -4? all the way up to 500?F at a safe distance. Offers an amazing
3% accuracy and a resolution of 1?F. Field of view is 6:1, emissivity
fixed at 0.95. Backlit LCD readout is easy to see, even in dim
lighting. Use the infrared thrmometer to instantly measure the
temperature of walkways, oven doors, motor housings, refrigeration
coils, foods, countertops or anything that could be too hot or too cold
to touch. We have been told it works great for locating cool spots in
paranormal studies as well! Complete with 9V battery. One year
warrantee.
|
79.95 |
View |
|
ELFLX Detector
Not a toy but a real Electric Field
detector! Features include LED indicator light, audible intensity
signal, rotary on/off switch, and pocket clip. Does not give you a
numerical readout, but it will tell you if high E-fields are present or
not. Red LED lights when field is detected and audible tone gives
indication of field strength and frequency. Useful for detecting and
tracing live wires (50/60 Hz, 100-600v) and comparing safe distances
from similar appliances. Rotary switch permits adjustment of
sensitivity. Requires 2 AA batteries. |
12.95 |
View |
|
Monitor 4: Radiation Monitor
No ghost hunting equipment toolbox would be complete without an
affordable geiger counter! Features easy to read analog meter, red
light count, anti-saturation circuitry, and audible indicator- all in
hand-held convenience. Uses a halogen quenched uncompensated Geiger
Mueller tube with a thin mica window. Detects alpha down to 2.5 MeV,
80+% efficiency at 3.6 MeV. Detects beta at 50 keV with 35% efficiency,
and 150 keV with 75% efficiency. Detects gamma and X-ray down to 10
keV. Range of 0.02 - 50 mR/hr. Includes 9V battery. 1-year warrantee.
Made in USA.
|
295.00 |
View |
|
Inspector
Larger detector window and digital readout make this our most sensitive
and accurate radiation meter for alpha, beta, gamma and X-rays. Simple
to use in basic mode, plus advance features which allow the user to
adjust the averaging time, switch from mR/hr to mSv/hr, and output data
to computer or data logger. Slide switch offers 3 modes of operation:
mR/hr, CPM, total counts.
4-digit LCD readout, red LED count light and audible tone. Includes
padded vinyl case and one year warranty. Requires a 9V battery. Made in
USA.
Specifications:
Detector
halogen-quenched uncompensated GM tube
Window
thin mica (1.4-2.0 mg/cm?); effective diameter 45mm
Averaging
display updates every 3 seconds; averages every 30 seconds or less
Ranges
CPM: 0 - 300,000
Total Counts: 1 - 9,999,000
mR/hr: 0.001 - 100
microSv/hr: 0.01 - 1000
CPS: 0 - 5000
Accuracy
mR/hr: ?15% from 0-50 and ?20% from 50-100
CPM: ?15% from 0-130,000 and ?20% from 130,000-300,000
Outputs
Dual miniature jack drives CMOS or TTL devices
Temperature
-10?C to +50?C
Size
5.9 x 3.14 x 1.18 inch
Weight
10.61 ounce (excluding 9V battery)
As accessories, there is the
Inspector Datalogging Software and
Inspector WipeTest Plate Accessory
|
525.00 |
View |
|
Inspector Datalogging Software
The Observer Software runs on a Windows
platform and can be used with the
Inspector to record Counts, CPM, and
CPS and has the ability to collect, log, and perform statistical
analysis on the data received.
The data is displayed on a graph as well as digital and analog
on-screen meters and can be saved or printed in various ways including
a spreadsheet format. The dwell/count time can be adjusted for each
point on the graph. You can also set the length of time for the count.
The on-screen meters in the software have adjustable settings as well
as a settable alarm in CPM. There are both visual and audio indicators,
and you can play the meter click through your PC speakers. Windows 95,
98 ME, XP, NT, 2000 compatible.
Includes cable.
|
80.00 |
View |
|
|
Inspector WipeTest Plate Accessory
This is an accessory for the
Inspector
which allows the user to perform
the standard wipe test. This stainless steel plate mounts to the back
of the meter and provides a consistent width space between the sensor
window and the surface to be wiped. Also provides protection for the
mica window and ease of decontamination.
|
40.00 |
View |
|
Microroentgen
This amazing low priced ionizing radiation monitor, in conjunction with
an IBM compatible computer, is a highly sensitive, feature packed, easy
to use Geiger counter. The software included gathers the radiation data
and displays it in a unique scrolling bar chart format, which is also
saved to a file for later review and manipulation. Includes an alarm
system which will alert you to the slightest increase in radiation over
any preset level you choose. Will detect, display and continuously
monitor low levels of ionizing radiation from natural background
sources, bricks and building materials, rocks, soil, water, jewelry,
contaminated food, beverages, chemicals, radon gas, nuclear accident,
etc. Will detect levels as low as 1 microroentgen/hr and up to 100,000+
microroentgen/hr. Measures Alpha, Beta, Gamma & X-ray. Sensitivity
is similar to
Monitor 4. No batteries required. Includes a
special serial port adapter that allows you to connect the detector to
your computer with as much ordinary RJ11 phone cord as you need. No
modification to your computer's hardware is required. Detailed
operating manual and 5 year limited warranty.
|
249.95 |
View |
|
Commercial Grade AC Magnetic Field Meter
Typical applications include checking the magnetic fields
produced by such equipment as transmission lines, computers, electric
blankets, electric appliances, televisions, etc. Very high accuracy and
sensitivity.
Specifications:
Portable, digital readout
Auditory and visual Alarm
Remarkable Linearity
Narrow Bandpass Filter
Sturdy Shielded and Grounded Probe
200 mV recorder Output
Range Settings: 2, 20, 200, 2000 milliGuass
Bandwidth: 11 hertz at 3db
Battery life: at least 48 hours with one 9v alkaline battery included
Weight: 15 oz. (425 grams)
Sensor: External Air coil type with 8" handle
Very high accuracy: 1% maximum error based on EPA report
Padded hard is included
Minimum detectable signal: 76 microGauss
Resolution: 0.37% @ 101 mG
2 Years Parts & Labor warranty
Highly recommended for researchers
|
625.00 |
View |
|
Hall-effect Gaussmeter
High linearity and high accuracy (3%) from 0-10 Hz.
4 ranges: 2, 20, 200, 2000 Gauss. 3? digit display, yields 1 mG
resolution (on lowest scale). 200 mV recorder output. Includes a 9V
battery plus AC adapter. Versatile enough to classify magnets, measure
residual magnetism, and check fields from DC circuits. Made in USA. 2
year mfr warranty.
|
525.00 |
View |
|
Magnetic Field Viewer Card
Finally, a way to actually "see" DC magnetic fields from permanent
magnets or magnetized metals without messy iron filings! You can use
this amazing film over and over to view the location and number of
poles on any magnet. Just lay the card on the magnet to see the polar
pattern. Magnetic poles appear as dark areas and the light areas
represent where the N and S poles meet. A great inexpensive magnetic
detector for finding objects in your environment that have become
magnetized. Uses no batteries. Also great for science projects.
Dimensions: 2-1/2" x 4"
|
2.75 |
View |
|
|
Magnetic Field Viewer Gel
Same flat viewer material that is in the viewer card but larger (full
12" x 12") and without the lamination. Can be re-used over and over.
Can be cut to custom sizes with a scissors, bent or rolled. For DC
magnetic fields only.
|
59.00 |
View |
|
Bandpass AC Gaussmeter 50Hz
Low cost, portable, single axis home model
with large, easy-to-read 3? digit display. What makes this meter unique
is the very narrow bandpass filter which only allows the calibration
frequency to be read. Gives very accurate readings without distortion
from harmonics.
Range: 0.1 - 199.9 milliGauss
4% Error Guarantee based on EPA report
Bandwidth: 11 Hz @ 3dB
Deluxe carry case and 9V battery included
1 Years Parts & Labor warranty, Made in USA
|
199.00 |
View |
|
Kilogaussmeter
This is a high quality, reasonably priced digital meter & it is
invaluable for reliable measurement of permanent magnets, magnetized
rocks and metals, the Earth's magnetic field, and any DC magnetic
field. Offering 3? digit bipolar display, 9V battery powered and comes
with an AC power adapter for extended benchtop use.
Coiled cable transverse probe (High Linearity Hall Generator) is
included providing nearly linear response from DC to 10 Hz. Useful 4
ranges covering 0 - 20, 200, 2000, 20,000 Gauss with a 3% accuracy
guarantee. Two year parts and labor warrantee. 200mV DC recorder output
(which can be used with
Extech Digital Multimeter with PC Interface to interface
this unit with your PC) is included.
|
525.00 |
View |
|
Geomagnetometer
You simply won't find anything this sensitive in this price range! Want
to measure the Earth's magnetic field with great precision? Want to
detect magnets from a distance? Breaks in magnetized steel cables? Need
to comply with shipping regulations? Then this is the unit for you.
Only 3" x 4" x 7" and operating on common 9V
batteries for total portability and convenience plus AC power adapter
included for extended benchtop use.
An axial probe (High Sensitivity Hall Generator)
with coiled cable
is included providing nearly linear response from DC
to 10 Hz.
Large 3? digit bipolar display. 4 ranges: 0-2, 20, 200, 2000
mG (yes milliGauss!) and a 5% error guarantee. Two year parts and labor
warrantee. 200mV DC recorder output included to interface this unit
with your PC or recorder.
|
750.00 |
View |
|
Zero Gauss Chamber
This chamber can be used with the
KiloGaussmeter
or
Geomagnetometer to
provide a zero gauss (magnetic field-free environment) reference,
enabling you to take absolute readings of the ambient magnetic field
(the Earth's magnetic field is typically around 500 mG). Concentric
welded 12" long tubes (?" ID chamber) with stand, made of high
permeability magnetic shielding alloy provide excellent shielding.
|
350.00 |
View |
|
|
RCA to Dual Banana Connector Cable
Perfect for connecting the output on this meter to a
Extech Digital Multimeter with PC Interface
for data logging and graphics.
RCA plug on one end, dual banana plug on other end.
|
14.95 |
View |
|
|
1/8 - Dual Banana Cable
Perfect for connecting Digital Multimeters to meters with 1/8" jack output. 1/8" plug on one end, dual banana plug on other end.
|
14.95 |
View |
|
StrikeAlert
StrikeAlert is a small and affordable lightning detector that provides
an early warning of approaching lightning strikes from as far away as
40 miles and lets you know if the storm is coming your way or moving
away. An audible alarm allows you to determine the storm's activity
without having to visually monitor the unit and sounds when there's a
strike. A corresponding LED light illuminates to indicate lightning at
distances of 20-40 miles, 12-24 miles, 6-12 miles and within 6 miles.
The detector is housed in a small pager-like casing that can be clipped
on a belt and runs up to 100 hours on a single AA battery.
Perfect for kite flyers, golfers, sailors, pilots, athletes, beach
goers and anyone who spends work or leisure time outdoors. Paranormal
investigators can also use the StrikeAlert to monitor for unusual
lightning-like activity.
|
79.95 |
View |
|
Hall Effect Semi-Conductor
This component can be used in a circuit to
open and close a contact when exposed to alternating N and S poles of a
magnet. Will also work if exposed to the same pole on alternative sides
of the sensor.
Many uses including:
Counting revolutions, oscillations, or sequences
Turning LEDs, alarms, or other devices on/off
Detecting presence of magnetized materials
Intruder/theft alarms
Monitor start/stop of a moving process
Robotic effects and magic tricks!
Schematic of an example circuit included. Part number may vary from picture. Very unique!
|
2.00 |
View |
|
Kill-A-Watt
Monitor the quality of the power in your electric lines, cut down on
electricity costs and find out what appliances are worth keeping
plugged in. Simply connect your appliances to the Kill-A-Watt?, and it
will assess how efficient they really are. Large LCD display will count
consumption by the Kilowatt-hour, just like your local utility. You can
figure out your electrical expenses by the day, week, month or year. It
even checks the quality of your power by monitoring Voltage, Line
Frequency, and Power Factor. Accuracy within 0.2%. Now you'll know if
it is time for a new refrigerator or if that old air conditioner is
costing you money. North American plug only.
Max Voltage ... 125 VAC
Max Current ....15 A
Max Power ..... 1875 VA
Weight ............. 5 oz.
Dimensions ...... 5-1/8" X 1-5/8" X 2-3/8"
|
49.95 |
View |
|
MagnaProbe
The perfect way to visualize the three dimensional nature of a DC magnetic
field. MagnaProbe is a small magnet suspended in a gimbal mounting. The
magnet's North pole is colored red, South is blue, to easily indicate
polarity of the field under investigation.
The MagnaProbe can be used to show :
forces between magnetic poles
induced magnetism
the shapes of magnetic fields between like and unlike poles
mapping and direction of a magnetic field around a bar magnet, a wire or a coil
properties of a field produced by an electric current
shape, intensity, and distribution of field lines after magnetic shielding
This is a very important tool for mapping the
direction of field lines prior to shielding design (speaker shielding
for example), and is a great teaching tool.
|
14.95 |
View |
|
AC to 9V DC Adapter
For extended meter use, allows you to use plug-in
power to replace the 9V battery in any meter which uses one. Saves
money on batteries.
Input: 120VAC, 60 Hz
Output: 9VDC, 250 mA max
|
9.95 |
View |
|
Low Frequency Counter
So you want to check extremely low frequencies down to 5 Hz? Doing
bio-magnetic or paranormal work? Interested in harmonics in your power?
The Low Frequency Counter provides outstanding value and versatility
that rivals or exceeds counters costing much more. Large eight digit
LCD display gives plenty of information about the predominant
incoming frequency and the good nominal input sensitivity provides
stable readings. Covers the entire frequency range of 5 Hz to 1.3 GHz
so you can check most low frequency sources.
Probe/antenna not
included, but it works well with the
MagCheck 95 Sensor (field must
exceed 15 mG) and telescoping antenna. |
259.95 |
View |
|
Portable Oscillascope
Anyone
familiar with the operation of an oscilloscope will appreciate the
incredible low price and full features of the hand held oscilloscope.
Connected to a probe (magnetic, electric or RF) you can measure voltage
up to 80V AC or DC and check the waveform up to 2MHz. See spikes, RF
noise, harmonics. Check for dirty power. Operates on 5 AA batteries,
not included. BNC input. Extend the input range to 600V with x10 probe
setting.
Input Impedence: 1Mohm//20pF (standard probe)
Timebase Range: 0.2 micro-s to 1 hour/div
Sensitivity: 5mV/div to 20V/div (0.1 mV minimum sensitity)
|
159.95 |
View |
|
Infra-Scan
Making candy and need your ingredients to
reach a certain temperature? Going swimming and want to know if its
warm enough? Need to know the temperature of hard to reach or possibly
dangerous surfaces? Need to know if your dog has a fever?
Infra-scan infrared thermometer is perfect for
home/office use for quick and simple temperature measurements using a
technique called radiation thermometry. This allows accurate
measurement of surface temperatures without contact. Small temperature
changes can be easily measured.
This IR thermometer measures temperatures from
-5?F to 572?F up to ten feet away with single button operation. Reads
either ?F or ?C with a simple double-click. LCD backlight during
measurement (auto-off).
More Specifications:
Accuracy: +/- 2% and spot ratio of 6:1, fixed emissivity of 0.95
Power: 4 x LR44 button cell (included)
Battery Life: over 2,000 measurements (at 10 seconds per measurement)
Instructions in 4 languages. One year warranty. (Great for paranormal work, too!)
|
49.95 |
View |
|
Basic Digital DC Gaussmeter
This meter couldn?t be easier to use,
simply point and shoot. One button activation conserves battery life
and eliminates need for setting range. Automatic zero-ing. 3? digit LCD
readout indicates field strength. Meter also gives polarity
information. (Green LED indicates South pole, Red LED indicate North
Pole).
0-1999 mT range (0-19,990 Gauss)
1 mT (10 Gauss) resolution
?2% accuracy over the whole range
Transverse Hall effect probe is built in. Very fast and reliable. Great for comparing magnets and quality control. |
425.00 |
View |
|
Zap Checker
At this price, you can't beat the Zap
Checker as a relative field strength meter. It has tremendous
sensitivity and very broad band. Most RF meters use a microwave diode
detector as a basis of their detection system. They work well at high
signal levels, but have limitations at lower signal levels. The Zap
Checker's innovative design uses several stages of RF amplification
before detection, thereby making it more like a broad-band receiver
than a field strength meter.
The useable bandwidth extends from 3 MHz to
more than 5 GHz, and can detect even weak transmissions from
surprisingly long distances, or pinpoint leakage in cables, locate
hidden transmitters, determine optimum placement of computer wireless
equipment, monitor radiation levels at the baby's crib, detect hidden
cameras, audio bugs, and more. Detects digital and analog signals.
A manually adjustable sensitivity control allows you to adjust the
gain. Zap Checker has fixed internal antennas. Detection is in
logarithmic or linear modes. Use the logarithmic mode for stronger
signals In linear mode, the Zap checker picks up the weakest signals
for full display.
The signal reading is either by analog meter or
illumination of colored LED's. The Zap Checker also has a switch
enabled silent vibrator mode for situations in which it is undesirable
to view the displays directly. Zap Checker uses two AA batteries (not
included) for more than 80 hours of use and weighs less than 5 oz.
|
159.00 |
View |
|
Zap Checker Enchanced
The enhanced sensitivity version of the Zap Checker comes complete with
2 internal omnidirectional antennas (10 MHz-4.5 GHz) and the 2.3-6.4
GHz Log Periodic directional external antenna pictured.
Unit is so highly sensitive it can measure baseline ambient RF levels,
and pinpoint RF bugs by sweeping from the center of the room. Ideal for
security applications involving the installation of wireless
surveillance and data transmitting apparatus, localizing RFI sources,
determining "hot" and "cold" spots in the RF domain, discovering
potential hacker-site locations, evaluating cell tower radiation
patterns, detecting cable leakage, and so much more. Easy to use too.
Expect 80 hours operation on 2 AA alkaline batteries.
Includes silent vibrator, analog readout, and red/green LED features.
SMA coaxial input permits use of other antenna formats as well. |
369.00 |
View |
|
3-Axis DC Gaussmeter
Measure magnets
Monitor Earth?s magnetic fields
Check DC motors
Measure fields from low voltage (DC) systems
Easiest way to check Air Freight for compliance
Detect the movement of iron/steel objects (automobile traffic, conveyor belts, concealed weapons, etc.)
Rugged device connects to your PC or laptop though the COM port.
Measures in X, Y, and Z axis as well as SUM mode, all simultaneously!
Very simple software shows field strength in digital and graphic
format.
Range: -2.0000 to +2.0000 Gauss
Minimum sensitivity: 67 microGauss
Accuracy: ?2% of full scale
Includes everything you need to get started: probe, 9 ft cable, AC/DC power converter and software. Made in USA.
|
895.00 |
View |
|
Cell Phone Detector
Stop the disturbance of cellular phone
communications within your desired control area. This unique detector
will alert you to the presence of hidden remote cameras, RF bugs,
cellular phone and other radio frequency devices. Avoid peeping or
tapping to protect your privacy or protect information being disclosed
secretly.
Specially designed for easy and simple use, which does not require any complicated installation or any professional knowledge.
Features:
3 LEDs will light from green to yellow to red, indicating the strength of detected signal.
Audible alarm: The alarm changes from Slow to Rapid indicating the strength of detected signal.
Superior sensitivity for longer detecting distance with an
adjustable sensitivity tuner allows you to scan variable distance and
can eliminate background interference
Operates on 2 AAA batteries (included) for portability.
Improved features: now covers 50 MHz to 6.0 GHz, and offers superior sensitivity to digital and analog signals.
Applications:
Can be used to monitor the strength of cell phone towers, TV/radio
broadcasts, wireless keyboards and mouse, and other strong
communications signals from 50 MHz to 3 GHz.
Hospitals, medical centers or intensive care units, etc. that forbid cellular phone usage
Offices, factories, cinemas, theaters, concerts, museums or art galleries that prevent video body bugs.
Military, prison, or government premises where cellular or camera recording is forbidden.
Offices, restaurants or any commercial premises that would like to discourage cellular or RF disturbance.
Find the best signal spot for wireless CCTV or characterize antenna emission pattern.
Detect peeping cameras in shopping mall toilet, school toilet, locker room and fitting booth, club house, hotel etc.
|
99.95 |
View |
|
Strong Field AC Gaussmeter
Tired of gaussmeters without enough muscle to handle the strong
magnetic fields commonly found near vacuum cleaners, electric can
openers, hair dryers, power tools and the like? This unit offers high
accuracy, single axis, 50/60 Hz readings of both weak fields (down to
0.1 mG) and very strong AC fields (up to 19990 mG). Simple one-button
operation, 3? digit LCD display, and useful from 30Hz - 300Hz. Readout
in microTesla with simple x10 conversion for mG. Requires one standard
9V battery. A lot for the price!
|
99.95 |
View |
|
Datalogging 3-Axis Gaussmeter with PC interface
Designed to provide quick,
reliable and easy measurements of electromagnetic field radiation
levels around power lines, home appliances and industrial devices.
Displays microTesla or milliGauss, XYZ or 3-axis, and offers: Data hold
and Peak hold functions. Extremely sensitive (down to 0.01 mG, but
accuracy limited below 1 mG) with range all the way up to 1999 mG. Want
more? 2000 datalogging capacity with time/date stamp for field use and
RS-232 Optical interface with Windows 98/2000/XP software and cable
included. Large, easy to see display. Gets about 100 hours from 6 AAA
batteries, included.
SPECIFICATIONS
Display
3? digits. Max. indication 1999
Range
20/200/2000 milli Gauss 2/20/200
micro Tesla
Resolution
0.01/0.1/1 milli Gauss 0.001/0.01/0.1
micro Tesla
Number of Axis
Three axis
Band Width
30 Hz to 2000 Hz
Accuracy
?(3%+3d) at 50/60HZ, ?(5%+3d)
at 40Hz to 200HZ, -3dB at 30Hz to 2000HZ
Datalogger storage
999 readings
Sampling Time
Approx. 0.5 second
Battery Life
Approx. 100 hours
Operating Temp and Humidity
0 to 50?C (32 to 122?F) below 80%RH
Weight
Approx. 5.82 ounce
Dimension
6.06(L) x 2.83(W) x 1.37(H) inch
Accessories Included
Operation Manual , 6 size AAA batteries,
Software for windows and RS-232 Cable
|
309.00 |
View |
|
BNC Breakout Gator
7 inch long, BNC male one end, black/red booted alligator clips on other end.
|
6.95 |
View |
|
4-channel Data Logger
Features
record DC signals or slow-moving signals over very long periods
the measurements are automatically stored on your hard disk for further processing
thanks to the USB connection no power supply is necessary and installation is easy and straightforward
signals are instantly displayed on the PC screen using an analogue or DVM display
USB cable included
PC-LAB2000 Software included
Specifications
hardware:
USB connected and powered
four DC-coupled input channels
input resistance: 1Mohm
maximum samples per second: 100
four input ranges: 3V / 6V / 15V & 30V
sensitivity: 10mV (you can add a low cost
Audio Amplifier per channel to boost weak signals)
accuracy: ?3% of full scale
maximum input: 30Vdc
power and recording/diagnostic LED
software:
analog trace or digital readout
4 channels record simultaneously
min/max sample hold function
from 1 sec to 1000 sec per division
storage & recall of color screens or data
automatic recording option for long recordings
on screen markers for time and voltage
DLL included for your own developments
system requirements:
PC, running Win98SE or higher (does not work on WinNT or Win95)
free USB port
mouse
CD-ROM player
|
99.95 |
View |
|
Oscilloscope Spectrum Analyzer
Fantastically simple way to get frequency (and field strength)
information from your EMF probes and meters with ACV output. Using your
computer and monitor to display, all standard oscilloscope and spectrum
analyzer functions are available through the Windows based software
supplied. 2-channel capability, so you can connect 1 device or 2
devices simultaneously.
Look for harmonics or high frequency noise in powerlines
See waveform
Monitor spikes, surges, brownouts
Compare Electric field to Magnetic field, or to temperature, sound, light or other parameters with appropriate probes
Great for audio and automotive applications too
Connects to the computer?s parallel printer port.
Note: minimum sensitivity is 5 mV. If you want to monitor smaller
signals, add an
Audio Amplifier.
Features
Oscilloscope:
hardware:
timebase: 20ns to 100ms per div
trigger source: CH1, CH2, EXT or free run
trigger edge: rising or falling
trigger level: adjustable in steps of ? div
step interpolation: linear or smoothed
markers for: voltage and frequency
input sensitivity: 5mV to 15V / division with auto setup-function
pre-trigger function
true RMS read-out (only AC component)
recording length: 4096 samples / channel
sampling frequency: real-time: 1.25kHz to 50MHz; repetitive: 1GHz
maximum input: 30Vdc
power and recording/diagnostic LED
Spectrum analyzer:
frequency range: 0 to 25 MHz
linear or logarithmic time scale
operating principle: FFT (Fast Fourier Transform)
FFT resolution: 2048 lines
FFT input channel: CH1 or CH2
zoom function
markers for amplitude and frequency
Transient recorder:
time scale: 20ms/div to 2000s/div
max. recording time: 9.4hours/screen
automatic data storage
automatic recording for more than 1 year
max. number of samples: 100/s
min. number of samples: 1 sample / 20s
markers for time and amplitude
zoom function
recording and display of screens
data format: ASCII
Specifications
General information:
inputs: 2 channels, 1 ext?l trigger input
BNC connections
5 mV ? 15V per division
sensitivity: 0.1 mV
input impedance: 1Mohm // 30pF
frequency response: ? 3dB (0 to 50MHz)
max. input voltage: 100V (AC + DC)
input coupling: DC, AC and GND
optically ISOLATED from computer
supply voltage: 9-10V DC / 1000mA
Minimum system requirements:
IBM compatible PC
Windows 95, 98, ME, Win2000, NT, XP
SVGA display card (min. 800x600)
mouse
free printer port LPT1, LPT2 or LPT3
CD-ROM player
Includes:
PCS500 unit
2 probes and PC parallel cable
practical manual and CD with software
AC adapter
|
599.95 |
View |
|
Simple Radation Finder
If microWatts and milliGauss make your head spin, this is the meter for
you. Completely simplified for the non-technical user, this is the most
uncomplicated meter we offer. Just turn it on and the meter will tell
you about the status of both AC magnetic fields and microwaves in the
vicinity with 3 LED lights which indicate ?safe-green?,
?caution-yellow?, or ?warning-red?. Covers 50 Hz ? 3 GHz. Requires 9V
battery. Made in USA. 1 Year warranty.
Specifications
Magnetic
Microwave
Green Light
Less than 2.5mG
Less than 0.02 mW/cm?
Yellow Light
2.5-8 mG
0.02 ? 0.1 mW/cm?
Red Light
More than 8 mG
More than 0.1 mW/cm?
|
29.95 |
View |
|
Digital Combination meter
The Digital Combination Meter boasts several distinct advantages for a meter in this price range:
Wide frequency response: very flat (1 dB) from 16 Hz to 2000 Hz; useful from 5 Hz to 7000 Hz (3 dB)
Tremendous Sensitivity and Range: Magnetic: 1-2000 nT (0.01-20.00 mG); Electric: 1-2000 V/m
Accuracy: ?2% ?20 digits at 50/60 Hz
Cool audio tone which resembles a Geiger counter
Simple to operate, easy to read.
Perfect for home, student, or researcher.
Uses a standard 9V battery, included. Instructions in German and English. 2 year warranty
|
169.99 |
View |
|
High Frequency Meter
We like this calibrated wideband (800 MHz - 2.5 GHz) RF meter because
it has a switch which allows a choice of peak or average indication
mode. This permits accurate measurement of both digital and analog
signals. Two ranges:
1 - 1999 µW/m˛ (same as 0.1 – 199.9 nW/cm˛) and 0.1 - 199.9 µW/m˛ (same as 0.01 – 19.99 nW/cm˛).
In addition, you get a choice of audio tone ?
none, or intensity proportional to field strength, or proportional to
frequency (for analyzing pulsed signals)
- accuracy ±6 dB
- true logarithmic - periodic antenna, 800 MHz - 2.5 GHz, single polarized, included
- standard 9V battery included
Easily
detects cell phone towers, cordless phones even microwave oven leaks.
Instructions in German and English. 2 year Warranty.
|
499.99 |
View |
|
Professional Combination Meter
This meters meets all TCO requirements for
AC Electric and Magnetic Field measurements. Tremendous sensitivity and
highly linear over 4 selectable frequency ranges which allows for
determination of ELF compared to VLF readings, ultra-low frequencies
down to 5 Hz, and a special filter for 16 Hz typically associated with
electric trains. Includes both an AC voltage output (to analyze
frequency information or use a headset to hear the corresponding audio
frequencies) and a DC output (for long term monitoring with a recording
device), Geiger counter style audio output, auto power off, and
integrated battery check.
AC Magnetic
AC Electric
Range 1:
0-200 nT (2 mG)
0-200 V/m
Resolution 1:
0.1 nT (0.001 mG)
0.1 V/m
Range 2:
0-2000 nT (20 mG)
0-2000 V/m
Resolution 2:
1 nT (0.01 mG)
1 V/m
Accuracy:
?2%
?2%
Frequency range choices:
5 Hz ? 100 kHz (full bandwidth)
16 Hz (electric trains)
50 Hz ? 100 kHz (ELF + VLF)
2 kHz ? 100 kHz (VLF only)
Single axis
3? digit LCD display. Power consumption: 15-20 mA.
Includes 8 hour rechargeable 9V battery, AC power supply/charger, and ground cord. Manual in English and German. 2 year warranty.
|
695.95 |
View |
|
Frequency Filter Accessory
This accessory for the
High Frequency Meters is basically an adjustable
narrow bandpass filter which allows a user to examine one very narrow
frequency range at a time, filtering out all other frequencies. Useful
from 700 MHz - 3 GHz
|
369.75 |
View |
|
Low Cost Radiation Monitor
Designed for evaluation of ambient dosage
of gamma-radiation, which can be done by common people in domestic
environment (food products, construction materials, soil, etc.). Also,
the instrument can be used by personnel, working with ionizing sources
of radiation. Moreover, the instrument can detect objects, polluted by
beta-active radioactive nuclides.
The instrument uses the Geiger counter for
calculation the amount of gamma- and beta-particles within 40 sec. and
indicates the values in ?Sv/h and ?Rem/h on LCD screen. Registration of
every particle is indicated by a sound-alarm, which makes it possible
use ?Search? mode.
The instrument incorporates the following
features: indication of value dimension, indication of sound-alarm
threshold, continuous amendment of indications in proportion as
duration of measurement increases, display illumination, menu in
English.
Scale range capacities ambient dose equivalent
?Sv/h
0.05 ... 9.99
Scale range exposition dose rate
?Rem/h
5 ... 999
Range energy scales
MeV
0.1 ... 1.25
Reproducibility of indications (at confidential probability 0.95), where ? is dose rate in ?Sv/h
%
15+6/?
Levels of sound-alarm threshold
?Sv/h
0.30, 0.60, 1.20
?Rem/h
30, 60, 120
Time of calculation
sec
40 ?0.5
Time of indication
.
continuous
Batteries "AAA" type
.
1 or 2
Time of continuous operation, at least
hour
550
Outside dimensions
inch
4.13x2.36x1.02
Weight (without battery)
ounce
31.74
|
159.95 |
View |
|
Radiation Check Source
Cesium-137, 0.1 microCi calibration
standard mounted in a 1? plastic disk. 30.1 year half life. Emits Gamma
& Beta. Use it to test your Geiger Counter?s performance.
No special handling, storage, shipping, or disposal required. Presents no known radiation hazard.
|
65.00 |
View |
|
High Frequency Pollution Meter for Wiring
Don?t just take our word for it. You can now
check for this pollution yourself! A special meter has been developed
which can be plugged into an electrical outlet to determine the levels
of EMF high-frequency pollution in your home or office both before and
after using the HF EMPOR. Extremely easy to use and reliable.
This meter is designed to measure only the high
frequency noise which may exist in your electrical wiring. It contains
special filters which remove the normal 60 Hz signal for the readout.
The meter is very easy to use. Simply plug the
meter into an electric outlet. The meter works equally well on standard
outlets (2 prong, or 3-prong), and GFI outlets. It can also be used
with surge suppressors, power strips or extension cords.
The readout of the meter gives an indication of
how much high frequency noise is in the wiring at the outlet where the
meter is located. The higher the readout, the more high frequency
pollution. The readout is not calibrated, but is very useful for making
relative (comparison) measurements.
Ideally, the readout should be as low as
possible. It is generally agreed that readings should be below 50.
Notice that unplugging appliances may affect the reading.
When using the meter in conjunction with the
Graham-Stetzer Filters, plug the meter into the outlet first. Then add
Graham-Stetzer Filters to the same outlet and nearby outlets and watch
the reading decrease.
The use of a power strip to increase the number
of available outlets is useful when you need multiple Graham-Stetzer
Filters to reduce the reading to the desired level.
The meter is re-usable.
|
99.95 |
View |
|
Silver Lining Shirt
Very sheer, comfortable shirt you can wear over your regular one to shield yourself from powerline and computer electric
fields, and microwave, radar, and TV radiation. This silver-plated,
stretchable, washable nylon mesh is electrically conductive. It
provides EMF radiation protection by reflection. Plus you won't get
those static shocks as you used to in dry weather and your clothes
won't cling to you! Fabric provides up to 35dB of shielding at 100 MHz.
Made in USA. Surround what you want to protect!
We recommend that you order a size larger than you
normally wear, so that you can put the Silver Lining garment over a
cotton one, to avoid direct contact between your skin and the
conductive fabric.
Size
Chest
Length
Small
35"
23"
Medium
39"
26"
Large
43"
27"
X Large
47"
31"
XX Large
51"
32"
Related Products:
:: Relaxing Shirt Cosmo Vital |
90.00 |
View |
|
|
Silver Lining Camisole
Very sheer, comfortable camisole you can wear over your regular one to shield yourself from powerline and computer electric
fields, and microwave, radar, and TV radiation. This silver-plated,
stretchable, washable nylon mesh is electrically conductive. It
provides EMF radiation protection by reflection. Plus you won't get
those static shocks as you used to in dry weather and your clothes
won't cling to you! Fabric provides up to 35dB of shielding at 100 MHz.
Made in USA. Surround what you want to protect!
We recommend that you order a size larger than you
normally wear, so that you can put the Silver Lining garment over a
cotton one, to avoid direct contact between your skin and the
conductive fabric.
Size
Chest
Length
Small
32"
23"
Medium
35"
23"
Large
38"
25"
X Large
41"
25"
XX Large
44"
25"
|
57.60 |
View |
|
|
Silver Lining Boxer Shorts
Very sheer, comfortable undergarment you can wear over your regular one to shield yourself from powerline and computer electric
fields, and microwave, radar, and TV radiation. This silver-plated,
stretchable, washable nylon mesh is electrically conductive. It
provides EMF radiation protection by reflection. Plus you won't get
those static shocks as you used to in dry weather and your clothes
won't cling to you! Fabric provides up to 35dB of shielding at 100 MHz.
Made in USA. Surround what you want to protect!
We recommend that you order a size larger than you
normally wear, so that you can put the Silver Lining Boxer Shorts over a
cotton one, to avoid direct contact between your skin and the
conductive fabric.
Size
waist
Length
Small
31"
16"
Medium
35"
16"
Large
39"
17"
X Large
43"
17"
|
90.00 |
View |
|
|
Silver Lining Scarf
Scarf is pure Silver Lining fabric, nicely hemmed. Light and
airy and very unobtrusive, a full 36" x 36". Wear it "as is" or use it
to line your favorite silk scarf. Provides 90% or better shielding to 1
GHz and beyond. |
64.00 |
View |
|
Hook and Loop Fastener
Similar to Velcro? but conductive. One inch
wide. Excellent holding power and RF shielding. Use it to create
re-sealable flaps, tubes, and seams in shielding fabrics, plastics and
foils. Will conduct along its length and across the gap. Silver coated.
Can be sewn in or glued, no adhesive supplied. Very unique!
Expected cycle life: 5000 openings/closings
Shear strength: 12.3 psi (new) / 6.7 psi (after 5000 cycles)
Peel strength: 1.2 piw (new) / 0.8 piw (after 5000 cycles)
Weight: 0.15 oz/in?
Mated thickness: 1/8 in
Resistivity:
Hook: 1.8 Ohm per sq
Loop: 1.4 Ohm per sq
0.8 Ohm through mated closure
|
15.29 |
View |
|
Anti-Static Mat
You can ground a useful (22" x 11?") area with this professional quality
heavy duty static control mat. Use it with static sensitive computer
equipment or as a surface for handling static sensitive
semi-conductors. Put it under your keyboard or laptop.
More importantly, you can simply touch the mat with any part of body to
dissipate electric field build-up and equalize your potential with
ground. Put it on your seat or under your pillow. Step on it barefoot
and it's as good as walking through Mother Earth's own cool green
grass. Can be trimmed with scissors to fit any area. Includes 5 foot
grounding cord with built in 1 megOhm resistor. Surface resistivity
less than 1010 ohm/sq. White on one side, black on the other, about 1/8" thick.
|
14.95 |
View |
|
Bio-Grounder
When we tested it, we were amazed at how well this device does
what it claims. Place this simple pad on your car seat and attach the
provided ground wire to any portion of the metal seat frame. The
Bio-Grounder drains away body voltage which otherwise builds up (90 mV
or more in some tests!) This body voltage has been shown to add tension
to the nervous system, increase heart rate and accelerate fatigue.
Bio-Grounder may reduce symptoms electrically sensitive
individuals typically experience in the car. Drivers report a calm
increased alertness, less fatigue, and less tendency for road rage! Can
be used in any car or truck. One size fits all. Get one for each
passenger.
Seat not included and is shown in picture for demonstration purposes only.
|
29.95 |
View |
|
Vehicle Ground Strap
No one likes that awful big
shock when getting out of an automobile or truck. That shock is the
discharge of "chassis voltage" built up as the vehicle moves along the
highway. What you might not know is that in addition to causing
symptoms of high body voltage in the driver and passengers (such as
fatigue, irritability, drowsiness, and motion sickness), this type of
discharge causes serious injury when it occurs at the gas pump. Every
year, this seemingly innocent spark occurs at the wrong place and the
wrong time: igniting gasoline vapors while fueling the vehicle. This is
prevented by grounding the vehicle.
The Vehicle Ground Strap can be used on any car
or truck. Simply affix the strap's clamp to the chassis of the vehicle
and allow the conductive strap to dangle to the ground. Safe, durable
and unaffected by the weather, the Vehicle Ground Strap maintains a
secure ground and electrically neutral vehicle. Makes a great gift too.
18" long, 1 year warranty.
|
19.95 |
View |
|
|
Lead Foil Shielding Tape
This is traditional lead shielding which will block X-rays, Alpha and
Beta Particles for the ends of fluorescent tubes, radium glowing watch
dials, radioactive smoke detectors, labels for x-ray sensitive film,
and all sorts of shielding applications. Electrically conductive, it
cuts and bends easily (even conforms to curved surfaces). Peel-off
liner exposes 1-mil acrylic adhesive. Foil is 4 mil thick and 1 inch
wide. Temperature range: -30? to +325?F.
|
9.95 |
View |
|
Nickel/Copper Fabric Tape
High conductivity, high flexibility fabric tape with conductive
adhesive. Nickel and Copper coated nylon ripstop fabric (with
anti-fray) offers excellent RF shielding properties (82 dB at 1 MHz)
and electrical conductivity (surface resistivity of less than 0.1
Ohms/sq). Use it so seal gaps, seams, and edges of shielding fabrics,
paints or plastics. Also can be used to create conductive pathways on
surfaces or add shielding to cables and flexible conduits. Cuts easily
with scissors. Extremely corrosion and tear resistant, -40 to 250 ?F. 1
inch wide, 25 feet per roll.
|
19.95 |
View |
|
Budget Radio Frequency Curtain Shield
This has to be the shielding bargain of the century. A light weight,
highly reflective mirrorized plastic curtain which is simple to install
and provides well over 40 dB (100:1) reduction in common radiofrequency
and microwave radiation! Hangs easily from small diameter curtain rods
and can be used to shield windows, make room partitions, doorway
openings, or even as a wall hanging. Also blocks UV and sunlight, so it
prevents sunlight fading of your furniture, and helps prevent heat
loss. Built-in sleeve for curtain rod at the top. One side is
conductive, make sure to use a ground cord. 36 inch wide x 81 inch
long, and you can trim it easily with scissors to fit. Could also be
used to make a poncho. Nearly opaque silver color.
|
5.95 |
View |
|
Wireless Cellular Phone Shield
Shields the user from the RF microwave radiation emitted from both the
body of the phone and antenna. This shield is simple in design and easy
to use. Applying, removing and storing it takes just seconds, even
easier and less time than it would take to apply a headset to your
phone.
Independent lab report results (SAR testing)
confirms over 99% reduction of radiation to the brain. One size fits
all phone types including newer cordless phones, and all cellular
phones. This means you won't have to purchase additional shields if you
change your phone in the future or have several different phones
presently in use. In addition, while not in use, the shield can be
stored on the phone, further protecting your phone if dropped or from
accidental activation when stored in your pocket or pocketbook. Made in
USA, patented. Black leather, Weight: 1.6 oz
Three Sizes:
- Standard for phones 6" and over, excluding antenna
- Compact for phones under 6", excluding antenna
- Ultra Compact for phones under 5", excluding antenna
|
49.95 |
View |
|
|
Headset Extension Cord
Want to get even further away from your cellphone? This 6 foot headset
extension cord connects between the phone and the headset cable,
providing up to 9 feet of distance between your head and the phone.
0.98" universal. You can use up to 4 extensions.
|
4.95 |
View |
|
Ferrite Snap Board
Cables can act as an antenna, especially if they pass close to a strong
source of radiofrequency radiation. One study has suggested that if the
cable of a hands free mic passes near the phone's antenna, it can pick
up some radiation and transmit it to your ear. Our ferrite snap bead is
designed to reduce RF radiation in the cable. Made in 2 halves, you
simply press it around the wire at any convenient location. Couldn't be
simpler. It is small and lightweight enough to be almost unnoticable,
yet powerful enough (50 ohm impedence minimum) to control nasty
radiation. These are brand new, top quality industrial surplus, made by
TDK. Will accommodate wires up to 5 mm (? inch) in diameter. About 1
inch long, grey color. If you are concerned about RF radiation in
wiring, this is the answer.
|
7.95 |
View |
|
Shielded Gloves
For those of you who experience (or want to prevent) ES symptoms in
your hands when using a computer keyboard, laptop, cell phone or other
electronic devices, these gloves form a conductive enclosure and
effectively shield electric fields. Soft, light weight, with ribbed
cuff, and offering good tactile sensitivity. Stretchy, so one size fits
all, in basic gray color, each glove has a snap for a ground cord.
Fully washable and tested for 50 cycles with no appreciable loss of
conductivity. All fibers are conductive, achieving resistivity of less
than 103
ohm/sq. Supplied with one 10-foot coiled ground cord with snap on one
end and a banana plug/alligator clip on the other end. These gloves are
also used in industry for static control when working with delicate
static sensitive components. Grounding is not necessary for a 'Faraday
Cage' shielding effect, but is necessary for static control. Try it both
with and without ground cord and use whichever method works best for
you.
Shielded Gloves Ground Cord |
19.95 |
View |
|
|
Shielded Gloves Ground Cord
Extra ground cord for the Shielded Gloves.
|
7.00 |
View |
|
Grounding Cord
Insulated copper wire with standard alligator clips or 3-prong plug on the end. Connect it to
magnetic shielding foil to add e-field shielding capability or use it to attach computer
monitor shields, conductive fabric, or conductive painted surfaces to ground. Also great
as an extension for grounding wrist and waist straps.
Guide to options:
Gator/gator: Alligator clip on each end
3-prong/gator: 3-prong safety plug on one end, Alligator clip on the other
3-prong/ring: 3-prong safety plug on one end, Ring Terminal on the other
Gator/clamp: Alligator clip on one end, Ground Clamp on the other (great for grounding to pipes up to 1")
|
3.00 |
View |
|
PS/2 Keyboard or Mouse Cable Extendor
Radiation from computer monitors drops off dramatically with distance.
Move back 2 feet from your normal work position and cut your exposure
by 75%! Move back 4 feet and reduce it by nearly 90%! These extender
cables are a full 6 feet long. Male on one end, female on the other.
Push that monitor away and relax in the comfort of your favorite chair.
EMF exposure will be much lower, and you might just do your eyes a
favor too! This cable is a 6-pin cable.
|
9.95 |
View |
|
PS/2 Coiled Keyboard Cable Extendor
Radiation from computer monitors drops off dramatically with distance.
Move back 2 feet from your normal work position and cut your exposure
by 75%! Move back 4 feet and reduce it by nearly 90%! These extender
cables are a full 6 feet long. Male on one end, female on the other.
Push that monitor away and relax in the comfort of your favorite chair.
EMF exposure will be much lower, and you might just do your eyes a
favor too! This cable is a 5-pin cable.
|
9.95 |
View |
|
Stretch Silver Conductive Fabric
This medical grade Silver plated 92% Nylon 8% Dorlastan fabric offers the unique ability to stretch in both directions. Can be used as an antibacterial wound dressing (note: our material is not sterile) but it also makes a great material for electrode contacts, stretchy hats, socks, gloves, or other garments. Highly conducutive.
Width: 135 cm wide (52 inches)
Weight: 130 g/m˛
Thickness: 0.50 mm
Stretch: ~100% in length direction; ~65% in width direction
Surface resistivity is |
59.95 |
View |
|
|
Computer Cage
To get complete shielding of the electric fields from your computer
monitor, you need to also shield the sides and back. The Computer Cage
is a 4' x 6' fine mesh fabric that is highly conductive. The fine mesh
allows for easy air circulation and light weight while the conductivity
provides excellent shielding. Simply drape the material over your
monitor and attach the ground cord.
Combined with the Spectrum Shield
(for the front of the monitor), the Computer Cage completely surrounds
the monitor in a protective shield. Especially important in situations
where people are positioned near the back or side of computer monitors.
Can be used on TVs and microwave ovens too! Includes 18" grounding
cord.
|
89.95 |
View |
|
Laminated Microwave Absorber Sheet
NEW IMPROVED
MICROWAVE ABSORBING SHEET
NOTE: This product is sold by Linear Foot. Enter the number of feet you want in the quantity box before adding it to your cart. For example, if you want 30 linear feet, enter 30 in the qty box then press add to cart. Failure to do so will result in only 1 linear foot being shipped to you.
Now with plastic coating for easier handling
Carbon is conductive in some forms, and a very good microwave absorber. Using non-woven nearly-pure carbon fibers, to achieve both good microwave shielding and high absorption, this unique material has the following specifications:
Carbon base material (without plastic laminate):
Width: 48 inch (1219 mm)
Weight: 34 g/m˛
Thickness: 18 mil (0.445 mm)
Resistivity: ~3 Ohms per square
Tensile: 47 N/15mm
We are pleased to offer this improved version of our very low cost microwave absorber sheet. This version is plastic laminated on both sides. This gives better durability and easier handling. Dust is reduced and skin contact is not a problem.
Application Note:
To create a super high peformance enclosure, you can combine a layer of this Microwave Absorber material with a layer of a high performance fabric shield such as Flectron or Zelt. Line the inside of the shield with Absorber... it will scavenge any RF which might leak in.
Super light weight. Can be used to line walls and containers, make drapes or partitions. Does not permit air circulation, minimal light penetration.
Still 48 inches wide, but surface is non-conductive due to laminate. Request roll shipping if you need to avoid creases from folding.
NOTE: This product is sold by Linear Foot. Enter the number of feet you want in the quantity box before adding it to your cart. For example, if you want 30 linear feet, enter 30 in the qty box then press add to cart. Failure to do so will result in only 1 linear foot being shipped to you. |
8.95 |
View |
|
|
PaperShield
For small shielding job where you don?t need a high attenuation, this
unique material is just the ticket. Only 0.010 inch thick, PaperSHIELD
is flexible and can be easily cut with a scissors and shaped by hand
into simple or very complex shapes. High saturation and moderate
permeability make this ideal for shielding magnets. White paper on one
side can be imprinted (by you), peel and stick adhesive on the other
side permits easy and semi-permanent mounting almost anywhere. Magnets
will stick to it nicely. Really great for experimenting. 36 inches
wide. Made in USA.
|
11.95 |
View |
|
MagnetShield
First line of defense for shielding strong
magnetic fields from magnets, speakers, small transformers and motors.
Strong magnetic fields are harder to shield because they tend to
"saturate" the shielding material. This 4" wide foil is a hefty .010"
thick and 250' long and has an exceptionally high magnetic saturation of 21400 Gauss
and maximum permeability of 4000. Tin plated for excellent corrosion
resistance and better conductivity, it can be soldered or painted.
MagnetShield typically reduces fields up to a factor of 2 or 3
depending on size/shape of the shield. Can be used in multiple layers,
and/or in combination with a higher permeability alloy such as
Joint-Shield for higher attenuation. Annealing is not necessary with
this material.
Mechanical Specifications
Specific Gravity:
7.86
Coefficient of Expansion:
13.7 x 10-6 per °C
Tensile Strength:
42 x 10? PSI
Yield Strength:
27 x 10? PSI
Mod. of Elasticity:
30 x 106 PSI
Hardness (Rockwell B):
50 Ref.
Melting Point:
2789.6?F
Thermal Conductivity:
0.118 cal/sec/cm?/cm/?C at 20?C
Minimum Operating Temp:
4?K
Curie Temp:
1418?F
Carbon Content:
.07%
Electromagnetic Specifications
Electrical Resistivity:
64 ohms/cir mil-foot
Saturation Induction:
21,400 Gauss
Initial Permeabilty:
200
Permeability at 40 B:
300
Permeability at 200 B:
500
Maximum Permeability:
4000
Induction at m max.:
8000
Coercive Force:
1.0 Hc, Oersteds
Annealing is not as critical with this material as it is with the high
permeability materials (foil, Joint-Shield, Mag-Stop).
|
4.50 |
View |
|
|
MagnetShield 250' Roll
First line of defense for shielding strong
magnetic fields from magnets, speakers, small transformers and motors.
Strong magnetic fields are harder to shield because they tend to
"saturate" the shielding material. This 4" wide foil is a hefty .010"
thick and 250' long and has an exceptionally high magnetic saturation of 21400 Gauss
and maximum permeability of 4000. Tin plated for excellent corrosion
resistance and better conductivity, it can be soldered or painted.
MagnetShield typically reduces fields up to a factor of 2 or 3
depending on size/shape of the shield. Can be used in multiple layers,
and/or in combination with a higher permeability alloy such as
Joint-Shield for higher attenuation. Annealing is not necessary with
this material.
Mechanical Specifications
Specific Gravity:
7.86
Coefficient of Expansion:
13.7 x 10-6 per °C
Tensile Strength:
42 x 10? PSI
Yield Strength:
27 x 10? PSI
Mod. of Elasticity:
30 x 106 PSI
Hardness (Rockwell B):
50 Ref.
Melting Point:
2789.6?F
Thermal Conductivity:
0.118 cal/sec/cm?/cm/?C at 20?C
Minimum Operating Temp:
4?K
Curie Temp:
1418?F
Carbon Content:
.07%
Electromagnetic Specifications
Electrical Resistivity:
64 ohms/cir mil-foot
Saturation Induction:
21,400 Gauss
Initial Permeabilty:
200
Permeability at 40 B:
300
Permeability at 200 B:
500
Maximum Permeability:
4000
Induction at m max.:
8000
Coercive Force:
1.0 Hc, Oersteds
Annealing is not as critical with this material as it is with the high
permeability materials (foil, Joint-Shield, Mag-Stop).
|
844.00 |
View |
|
The EarthCalm Package - Ultimate 1
A note from the inventor of EarthCalm Products | EarthCalm Testimonials | EarthCalm FAQ's | EarthCalm Brochure | What is the Schumann Resonance? | What is the difference between an EarthCalm Resonator and the Q-Link pendant? | Cell Phone and Cordless Phone protection | Headaches & Migraines | Fibromyalgia & Electrical Sensitivity | Children, ADHD & Asthma | Protect yourself
Free Shipping on this Item!
Get 10% off when you buy TWO or more EarthCalm productsWe give you this 10% off package using the EarthCalm Home or Office Unit and the EarthCalm Resonator as the combination of these items produces better results
Consists of:
One Home Protection System
One Personal Scalar Resonator
The Ultimate Pack over time will result in a noticeable increase in overall health as well as alleviation of chronic symptoms such as headaches, asthma, hyperactivity, mood swings, etc. There is an additional enhancement when you double the EarthCalm 14 circuits to 28. The Ultimate Pack consists of one Scalar Resonator and one Scalar Home Protection System.
The Scalar Resonator
The EarthCalm Scalar Resonator is our maximum strength personal pendant. It consists of 7 EarthCalm circuits exactly matched by another set of 7 EarthCalm circuits for a total of 14 circuits. The resulting Scalar Resonance Technology maximizes protection from EMFs by amplifying your electrical grounding into the earth.
A scalar wave is generated whenever one wave is matched by the opposite frequency and amplitude of another wave such that they cancel each other out. The result is not zero, but rather another dimension is activated, which is non local (everywhere at once) and is theorized to be responsible for healing. The increased scalar waves generated by your nervous system when you are wearing a Scalar Resonator will bring you into greater balance with the earth
Notice to Researchers: EarthCalm is looking for a reputable Research Team who would be willing to conduct scientific research on the efficacy of EarthCalm Home Protectors for ADHD and Asthmatic conditions in children.
EarthCalm products never need 'recharging' and are offered with a 90 day money back guarantee to encourage you to experiment with this product yourself. This item can be returned in 90 days for a credit minus a $7.99 shipping fee for the 48 States. |
465.00 |
View |
|
|
MagneticShield 36"x15"x0.15" plate
First line of defense for shielding strong
magnetic fields from magnets, speakers, small transformers and motors.
Strong magnetic fields are harder to shield because they tend to
"saturate" the shielding material. This plate has an exceptionally high magnetic saturation of 21400 Gauss
and maximum permeability of 4000. Tin plated for excellent corrosion
resistance and better conductivity, it can be soldered or painted.
MagnetShield typically reduces fields up to a factor of 2 or 3
depending on size/shape of the shield. Can be used in multiple layers,
and/or in combination with a higher permeability alloy such as
Joint-Shield for higher attenuation. Annealing is not necessary with
this material.
Mechanical Specifications
Specific Gravity:
7.86
Coefficient of Expansion:
13.7 x 10-6 per ?C
Tensile Strength:
42 x 10? PSI
Yield Strength:
27 x 10? PSI
Mod. of Elasticity:
30 x 106 PSI
Hardness (Rockwell B):
50 Ref.
Melting Point:
2789.6?F
Thermal Conductivity:
0.118 cal/sec/cm?/cm/?C at 20?C
Minimum Operating Temp:
4?K
Curie Temp:
1418?F
Carbon Content:
.07%
Electromagnetic Specifications
Electrical Resistivity:
64 ohms/cir mil-foot
Saturation Induction:
21,400 Gauss
Initial Permeabilty:
200
Permeability at 40 B:
300
Permeability at 200 B:
500
Maximum Permeability:
4000
Induction at m max.:
8000
Coercive Force:
1.0 Hc, Oersteds
Annealing is not as critical with this material as it is with the high
permeability materials (foil, Joint-Shield, Mag-Stop).
Dimensions:
Width: 36"
Height: 15"
Thickness: 0.15" |
39.00 |
View |
|
|
MagneticShield 36"x120"x0.15" plate
First line of defense for shielding strong
magnetic fields from magnets, speakers, small transformers and motors.
Strong magnetic fields are harder to shield because they tend to
"saturate" the shielding material. This plate has an exceptionally high magnetic saturation of 21400 Gauss
and maximum permeability of 4000. Tin plated for excellent corrosion
resistance and better conductivity, it can be soldered or painted.
MagnetShield typically reduces fields up to a factor of 2 or 3
depending on size/shape of the shield. Can be used in multiple layers,
and/or in combination with a higher permeability alloy such as
Joint-Shield for higher attenuation. Annealing is not necessary with
this material.
Mechanical Specifications
Specific Gravity:
7.86
Coefficient of Expansion:
13.7 x 10-6 per ?C
Tensile Strength:
42 x 10? PSI
Yield Strength:
27 x 10? PSI
Mod. of Elasticity:
30 x 106 PSI
Hardness (Rockwell B):
50 Ref.
Melting Point:
2789.6?F
Thermal Conductivity:
0.118 cal/sec/cm?/cm/?C at 20?C
Minimum Operating Temp:
4?K
Curie Temp:
1418?F
Carbon Content:
.07%
Electromagnetic Specifications
Electrical Resistivity:
64 ohms/cir mil-foot
Saturation Induction:
21,400 Gauss
Initial Permeabilty:
200
Permeability at 40 B:
300
Permeability at 200 B:
500
Maximum Permeability:
4000
Induction at m max.:
8000
Coercive Force:
1.0 Hc, Oersteds
Annealing is not as critical with this material as it is with the high
permeability materials (foil, Joint-Shield, Mag-Stop).
Dimensions:
Width: 36"
Height: 120"
Thickness: 0.15" |
259.00 |
View |
|
Magnetic Shielding Foil 15inch wide, 0.004inch thick
Price is per linear foot. Please enter the the desired length (per linear ft) in the quantity box
Used for years in industry to shield delicate electronic components
from EMFs, magnetic shielding alloy is now available at affordable
prices for home and office use. This 80% nickel alloy is easy to trim
with scissors and shape by hand. Can be formed into magnetic barriers
on cellular phones, microwave ovens, doorbell transformers, VDTs,
buried wiring, and more. With snug fitting shapes, get as much as 75%
attenuation of the magnetic field with one thickness. Use multiple
layers for even greater reduction. Foil is available in two sizes and
can be ordered in any length. (We recommend the use of a
gaussmeter
to determine the proper shape and positioning of the magnetic shield,
and to confirm that the fields have been adequately reduced.)
CAUTION: Foil has sharp edges!
SPECIFICATIONS:
Thickness: 0.004"
Temper: Stress Annealed
Specification: MIL N 14411c
Grain Size: 10
Hardness: HV 0.3 = 188
Coercive Force: HC = 0.007 Oersteds
Max. Permeability: MUMAX = 325000
Saturation Induction: B (10 OE) = 7500 G
Chemical Analysis:
Ni: 80%, Fe: 15%, Mo: 5% plus trace amounts of S, C, Mn, Si, & P
Attenuation is the ratio of the magnetic field strength on one side of the foil
compared to the field strength on the other side.
You can estimate the amount of magnetic field reduction (Attenuation)
produced by a cylinder of .004" Magnetic Shielding Foil of a given Diameter (D, in inches)
if you know the Permeability (P), with this formula:
Attenuation = 0.004 x P/D
For example: You would expect a 8:1 reduction (88%)
from a 10" cylinder in a 1 kHz field where permeability is about 20000
Attenuation = .004 x 20000/10 = 8
Shielding Foil Installation Notes:
1) Cylindrical shapes generally provide more shielding than flat layouts.
2) Allow at least 1" overlap & achieve good foil-to-foil contact at all seams.
3) Do not solder or weld. Heating permanently reduces shielding effectiveness.
4) Spacer shims of 1/16" to 1/8" between layers improves shielding effectiveness.
5) Avoid sharp angle bends in the alloy.
6) Foil can be glued, screwed, nailed, taped, riveted or stapled to a supporting surface.
7) Use metal primer first if you are going to paint the foil.
8) Apply protective covering to all exposed edges. They are SHARP!
Price is per linear foot. Please enter the the desired length (per linear ft) in the quantity box |
21.95 |
View |
|
Mumetal Wire
Do you have an application requiring Mumetal? in un-insulated wire format? We have it in two different diameters!
Stress annealed Mumetal?
alloy. Wind it, weave it, braid it. Create toroids, coils, chains or
simply experiment with its unique properties! Be the first to create a
truly magnetic shielded garment!
Cost of product is per pound. For more pounds of wire please order more than one spool.
Note:
.005" wire yields approximately 13400 ft per pound
.025" wire yields approximately 530 ft per pound
Chemical Analysis (%):
S:
C:
Mn:
Si:
Ni:
Mo:
P:
Fe:
.0006
.0044
.502
less than .010
80.00
5.0
.0035
balance
Mechanical Specifications
Specific Gravity:8.74
Coefficient of Expansion:12.6 x 10-6 per ?C
Tensile Strength:85 x 10? PSI
Melting Point:1454?C
Thermal Conductivity:0.138 cal/sec/cm?/cm/?C at 20?C
Minimum Operating Temp:4?K
Grain Size:10
Hardness:HV 0.3 = 188
Anneal:Stress
Specification:MIL N 14411c
Electromagnetic Specifications
Electrical Resistivity:
Saturation Induction (10 OE):
Maximum Permeability:
Induction at m max.:
Coercive Force:
Curie Temp:
330 ohms/cir mil-foot
7500 Gauss
325,000
3000
.007 Hc, Oersteds
850?F or 454?C
|
75.00 |
View |
|
Joint Shield
When you need more than one Mag-Stop Plate to
cover an area, how do you handle the joints? Joint-Shield is the
perfect solution! This is a generous .010" thick, fully hydrogen
annealed magnetic shielding alloy with adhesive backing (rated 0 -
200?F) on one side. Simply butt the Mag-Stop plates tightly together,
and "tape" over the seam with Joint-Shield high permeabilty alloy. This
method offers much less bulk and better appearance than the old overlap
technique and provides excellent shielding integrity. Simple to use:
just cut to desired length with a heavy scissors, peel the protective
backing and press into place!
Joint-Shield can also be used by itself as an excellent magnetic
shielding material when a 4" width and adhesive backing is desirable
(wrap it around wiring and conduit, speaker magnets, even small
appliances like shavers and hair dryers!). Joint-Shield can be shaped
by hand, without the need for special tools, but watch the sharp
edges.
Mechanical Specifications
Specific Gravity:
Coefficient of Expansion:
Tensile Strength:
Yield Strength:
Mod. of Elasticity:
Hardness (Rockwell B):
Melting Point:
Thermal Conductivity:
Minimum Operating Temp:
Curie Temp:
8.74
12.6 x 10-6 per ?C
64 x 10? PSI
18.5 x 10? PSI
25 x 106
50 Ref
1454?C
0.138 cal/sec/cm?/cm/?C at 20?C
4?K
400?C
Electromagnetic Specifications
Anneal:
Electrical Resistivity:
Saturation Induction:
Initial Permeabilty:
Permeability at 40 B:
Permeability at 200 B:
Maximum Permeability:
Induction at m max.:
Coercive Force:
hydrogen
330 ohms/cir mil-foot
8000 Gauss
30,000
75,000
135,000
450,000
3000
.015 Hc, Oersteds
General Information:
Pressure sensitive adhesive (peel and stick) on one side of the
material permits quick and easy prototype and shield fabrication by
hand. The material exhibits an aesthetically clean and bright metallic
surface. The annealing process leaves the alloy "dead soft" so it
should be protected from denting and scratches. Bending is possible,
but gently rounded bends are favorable to sharp creases and acute
angles. Great care should be taken to avoid heating
this material above 400?C since heating will affect the grain size and
deteriorate shielding properties. Unfinished edges may be sharp so care
should be taken during handling, and proper finishing of edges is
required to protect end user.
Maintenance:Because of its high nickel content, this alloy
is highly corrosion resistant. Cleaning is simple with a soft cloth, or
you can use mild soapy water (be sure to rinse well and dry). If
required for cosmetic purposes, this material can be spray painted or
adhesive veneers may be applied.
|
19.95 |
View |
|
Conductive Marker
Need a conductive liquid but don't need a whole quart? Use this unique
marker to draw real silver conductive lines with precision and control
to repair circuits, jump across connections, apply shielding to a small
area, or even repair your auto windshield defroster! Valved marker tip
for easy application. Can be soldered at low temperatures. Dries
quickly with no special equipment. 8.5 grams goes a long way. Perfect
for designing prototype circuits too! Air dry in 45 minutes, or heat
dry for 5 minutes at 250-300? F. Caution: uses volatile solvents.
Safety Data |
19.95 |
View |
|
Conductive Epoxy
Excellent electrical conductivity and high strength conductive bonding
combined with convenience. Repairs defective traces and creates jumpers
to board. Allows you to make quick solderless electronic connections.
Connect ground cord to conductive fabrics and garments. Two Part
Epoxy?easy 1:1 mixing ratio. Bonds heat sensitive components without
soldering. Makes surface mount connections, no drilling required! 14
gr. total. |
25.95 |
View |
|
Conductive Grease
Conductive lubricant containing pure silver provides superior
electrical and thermal conductivity, lubrication and protection. Handy
syringe dispenser permits precise control and no mess. Effectively
lubricates metal, rubber and plastic. Protects against moisture and
corrosion. Thermally stable over a wide temperature range. Reduces wear
too. 0.23 oz.
|
19.95 |
View |
|
Silver Print Conductive Ink
This conductive coating consists of finely
divided silver powder in a methyl methacrylate binder. It can be
applied by brush, screen, dip or spray. Suitable for application to
most materials: paper, films, plastic, rubber, wood, metal or ceramic
and it air dries at room temperature in 16-20 hours or it can be forced
dried at 140?F for 1 hour. The coating must be fully dried to achieve
maximum conductivity.
Uses include PC repair, add-on circuit traces,
electrical contacts where solder is not practical, shielding seams and
small gaps. Electrical resistance of a 1 mil dry coating will be
approximately 0.2 Ohm/sq. or less.
It is extremely important to keep the material
thoroughly mixed during application as the silver particles do settle
out of suspension rather quickly. Butyl acetate can be used as a
thinner. Coverage at 2.0 mil is approximately 18 in?/gram. Supplied in
0.75 oz bottle.
Click here to view safety info
|
29.95 |
View |
|
Super Shield
A general purpose EMI/RFI shielding in a handy aerosol spray for use on
most substrates. Especially good for RF shielding plastic electronics
enclosures. Consists of a tough, durable acrylic base pigmented with a
high purity nickel flake. One to two mil coating provides 40dB - 50dB
shielding across a frequency range of 5 to 1800MHz. About 1600 in?/can
coverage at 1.5 mil. Contains no CFC 'S, NO HCFC'S, ozone friendly.
340g (12 oz) aerosol can. Dries to a dull gray color.
Volume Resistivity: 1 Ohm - mil
Dry time: 10 minutes at room temperature
Recoat time: 5 minutes
Excellent adhesion to most plastics
Tested as per IEEE Std. 299-1997
Underwriters Laboratories Recognized File No.: E202609
Click to see safety info
|
31.95 |
View |
|
Economy Grounding Wrist Strap
One size fits all, low cost static dissipative vinyl. Best for short term use or travel.
Surface resistance of 107 ohms. Ribbon length: 35?". Gray. Mini alligator clip fastens securely to ground.
|
2.99 |
View |
|
Mag-Stop Plate - Stress Annealed
Now achieve excellent and affordable magnetic shielding in difficult situations! Mag-
Stop Plates are extra thick high-efficiency magnetic alloy (Mumetal?) plates, specially designed to
provide superior shielding for electric circuit boxes, side by side computer users, and any
situation where you need a flat shielding material on a wall, floor, or ceiling. Can be
mounted with ordinary nails or screws, or sandwiched between the studs and dry-wall.
Use zinc chromate primer before painting. In one application, we were able to achieve almost 95% attenuation of a
200 mG field!
The 24" wide "stress annealed" plates offer good magnetic shielding and
are also well-suited
for forming into complicated shapes.
Application Note for Joining Plates:
There are two effective ways to achieve shielding continuity between multiple plates:
1) overlap 2" at the joints, ensuring good metal-to-metal contact
2) butt joints tightly and cover over the joints with
Joint Shield
General Information:
The material exhibits an aesthetically clean and bright metallic
surface. The annealing process leaves the alloy "dead soft" so it
should be protected from denting and scratches. Bending is possible,
but gently rounded bends are favorable to sharp creases and acute
angles. Great care should be taken to avoid heating
this material above 400? C since heating will affect the grain size and
deteriorate shielding properties. Unfinished edges may be sharp so care
should be taken during handling, and proper finishing of edges is
required to protect end user.
Maintenance:Because of its high nickel content, this alloy
is highly corrosion resistant. Cleaning is simple with a soft cloth, or
you can use mild soapy water (be sure to rinse well and dry). If
required for cosmetic purposes, this material can be spray painted or
adhesive veneers may be applied.
SPECIFICATIONS:
Thickness: 0.004"
Temper: Stress Annealed
Specification: MIL N 14411c
Grain Size: 10
Hardness: HV 0.3 = 188
Coercive Force: HC = 0.007 Oersteds
Max. Permeability: MUMAX = 325000
Saturation Induction: B (10 OE) = 7500 G
Chemical Analysis:
Ni: 80%, Fe: 15%, Mo: 5% plus trace amounts of S, C, Mn, Si, & P
Details
Size (W x L x T inches)
Approx. Weight
24 x 120 x .020"
19 lbs.
24 x 120 x .040"
38 lbs.
24 x 120 x .062"
57 lbs.
|
1194.00 |
View |
|
|
Mag-Stop Plate - Hydrogen Annealed
Now achieve excellent and affordable magnetic shielding in difficult situations! Mag-
Stop Plates are extra thick high-efficiency magnetic alloy (Mumetal?) plates, specially designed to
provide superior shielding for electric circuit boxes, side by side computer users, and any
situation where you need a flat shielding material on a wall, floor, or ceiling. Can be
mounted with ordinary nails or screws, or sandwiched between the studs and dry-wall.
Use zinc chromate primer before painting. In one application, we were able to achieve almost 95% attenuation of a
200 mG field!
The 30" wide "fully hydrogen
annealed" plates offer the best shielding available (up to 10 times the
shielding effectiveness of stress-annealed alloy) and should not be
soldered, welded, or heated in any way. Hydrogen annealed plates have 2
small holes pre-drilled near one end which may be used for mounting.
Application Note for Joining Plates:
There are two effective ways to achieve shielding continuity between multiple plates:
1) overlap 2" at the joints, ensuring good metal-to-metal contact
2) butt joints tightly and cover over the joints with Joint Shield
General Information:
The material exhibits an aesthetically clean and bright metallic
surface. The annealing process leaves the alloy "dead soft" so it
should be protected from denting and scratches. Bending is possible,
but gently rounded bends are favorable to sharp creases and acute
angles. Great care should be taken to avoid heating this material above 400? C since heating will affect the grain size and
deteriorate shielding properties. Unfinished edges may be sharp so care
should be taken during handling, and proper finishing of edges is
required to protect end user.
Maintenance:
Because of its high nickel content, this alloy
is highly corrosion resistant. Cleaning is simple with a soft cloth, or
you can use mild soapy water (be sure to rinse well and dry). If
required for cosmetic purposes, this material can be spray painted or
adhesive veneers may be applied.
Mechanical Specifications
Specific Gravity:
8.74
Coefficient of Expansion:
12.6 x 10-6 per ?C
Tensile Strength:
64 x 10? PSI
Yield Strength:
>18.5 x 10? PSI
Mod. of Elasticity:
25 x 10? PSI
Hardness (Rockwell B):
50 Ref.
Melting Point:
1454?C
Thermal Conductivity:
0.138 cal/sec/cm?/cm/?C at 20?C
Minimum Operating Temp:
4?K
Curie Temp:
400?C
Electromagnetic Specifications
Electrical Resistivity:
330 ohms/cir mil-foot
Saturation Induction:
8000 Gauss
Initial Permeabilty:
30,000
Permeability at 40 B:
75,000
Permeability at 200 B:
135,000
Maximum Permeability:
450,000
Induction at m max.:
3000
Coercive Force:
.015 Hc, Oersteds
Details
Size (W x L x T inches)
Approx. Weight
30 x 29 x .020"
6 lbs.
30 x 59 x .020"
12 lbs.
30 x 29 x .040"
11 lbs.
30 x 59 x .040"
23 lbs.
30 x 29 x .062"
17 lbs.
30 x 59 x .062"
35 lbs.
|
498.00 |
View |
|
Silver Lining paint - Quart
Need high grade RF shielding in a water base? Silver Lining is
non-toxic because it is a one component acrylic latex coating using
silver particles for conductivity. Cleans up with water like ordinary
house paint. Can be rolled or brushed. Compatible with almost all
plastics. A quart covers about 120 ft? per 2 mil application.
Resistivity is <0.4 ohm/sq. at 2 mils, attenuation is 80 dB over 1
MHz ? 10 GHz. For interior or exterior application, but a protective
topcoat is recommended when used outdoors. Flat gray finish.
|
159.95 |
View |
|
|
Silver Lining Paint - Gallon
Need high grade RF shielding in a water base? Silver Lining is
non-toxic because it is a one component acrylic latex coating using
silver particles for conductivity. Cleans up with water like ordinary
house paint. Can be rolled or brushed. Compatible with almost all
plastics. Resistivity is |
459.95 |
View |
|
Magic Wall Paint 1 quart
A very unique item! Non-toxic, non-flammable, and non-hazardous, you
can paint this magnetic paint onto practically any surface that will
take a latex paint and then magnets will stick to it. Is your
refrigerator door running out of space for notes and pictures? Kids
want to hang things on the wall but you don't want the tape/tack marks?
Workshop needs more organizing space? Simply paint the wall, ceiling,
blackboard, bulletin board, kitchen cabinets (you can topcoat with your
favorite latex color) with magnetic paint, then post whatever you like
with magnets.
Owes its unique properties to the inclusion of
low corrosion iron filings in a water based latex. Brush or roll on.
Cleans up easily with water. Bonus: this paint actually provides a
slight amount of ELF magnetic shielding! Color is gray.
One quart of paint. Larger volumes are avaiable in the below options menu. |
29.95 |
View |
|
Metglas
Space-age technology has produced this unique ultra-high permeability
(1,000,000+) magnetic shielding alloy. Unlike conventional Mumetal?
shielding alloys which are nickel/iron based and depend on bulk for
effectiveness, MetGlas is a cobalt based alloy which is only 0.00065"
thick (that's 16 microns, a red blood cell is 8 microns across)!
Thinner means less material is needed. Less material means less weight
and lower cost. Easy to handle, too. Cut it with a scissors,
shape it with your fingers, tape it in place. Flexible and tough, with
moderate corrosion resistance, it can be used indoors or out. Near-zero
magnetostriction means it can be flexed over and over without losing
its shielding properties.
Wrap wiring, pipes, switches, or
electro-magnets. We were able to achieve over 95% reduction of fields
from a lamp cord by wrapping it in a single layer of this material!
Make shields for your shavers, electric toothbrushes, hair dryers,
alarm clocks or lighting ballasts. Even lay it flat (in our
experiments, we saw nearly 90% field reduction when a 4" x 4" MetGlas
shield was placed flat against an energized lamp cord). Note:
This material tends to saturate easily and is not recommended for
shielding strong magnetic fields. This is the material often used in
Electronic Article Surveillance systems. Formula 2714AZ, supplied
annealed.
Electromagnetic Properties
Saturation Induction (Tesla)
0.57
Maximum DC Permeability (?):
1,000,000
Saturation Magnetostriction (ppm)
|
2.50 |
View |
|
|
Metglas - 1 pound spool
Space-age technology has produced this unique ultra-high permeability
(1,000,000+) magnetic shielding alloy. Unlike conventional Mumetal?
shielding alloys which are nickel/iron based and depend on bulk for
effectiveness, MetGlas is a cobalt based alloy which is only 0.00065"
thick (that's 16 microns, a red blood cell is 8 microns across)!
Thinner means less material is needed. Less material means less weight
and lower cost. Easy to handle, too. Cut it with a scissors,
shape it with your fingers, tape it in place. Flexible and tough, with
moderate corrosion resistance, it can be used indoors or out. Near-zero
magnetostriction means it can be flexed over and over without losing
its shielding properties.
Wrap wiring, pipes, switches, or
electro-magnets. We were able to achieve over 95% reduction of fields
from a lamp cord by wrapping it in a single layer of this material!
Make shields for your shavers, electric toothbrushes, hair dryers,
alarm clocks or lighting ballasts. Even lay it flat (in our
experiments, we saw nearly 90% field reduction when a 4" x 4" MetGlas
shield was placed flat against an energized lamp cord). Note:
This material tends to saturate easily and is not recommended for
shielding strong magnetic fields. This is the material often used in
Electronic Article Surveillance systems. Formula 2714AZ, supplied
annealed.
Electromagnetic Properties
Saturation Induction (Tesla)
0.57
Maximum DC Permeability (?):
1,000,000
Saturation Magnetostriction (ppm)
<<1
Electrical Resistivity (? Ohm-cm)
142
Curie Temperature (?C)
225
Physical Properties
Density (g/cc)
7.59
Vicker's Hardness (50g load)
960
Tensile Strength (MN/m?)
1,000-1,700
Elastic Modulus (GN/m?)
100-110
Thermal Expansion (ppm/?C)
12.7
Continuous Service Temp. (?C)
90
Composition
Ni: 1.63%
Fe: 4.45%
Si: 8.60%
B: 3.15%
Co: 82.17%
Installation Instructions
Place Metglas as close as possible to the source of the field for best results.
Use an insulator to avoid direct contact between Metglas and covered metal conduits or wires.
Enclose the source (cylinder shapes) whenever possible.
Overlap and tape all seams for good metal-to-metal contact.
Avoid sharp bends and don't use helix (spiral) shapes.
Do NOT allow Metglas to contact live bare wires to avoid electrical shock!
And of course, be careful of the edges, as they may be sharp.
|
599.00 |
View |
|
Cupro-Cote Paint - Gallon
This is a sprayable, brushable, or rollable conductive metallic coating using a specially formulated copper
as the conductive agent for superior performance in electric field and
RF shielding. Developed initially as an RFI/EMI shield for plastic
electronic equipment housings, it can be applied directly onto acrylic,
ABS and structural foams, as well as solvent sensitive materials such
as polycarbonate and polystyrene. Can also be applied to other
non-porous surfaces including primed wallboard, wood and clean metals.
Can be applied by sprayer, brush or roller just like ordinary latex
paint! Just as safe to handle, too. Thin with water. Amazing surface
resistivity of |
459.95 |
View |
|
|
Cupro-Cote Paint - Quart
This is a sprayable, brushable, or rollable conductive metallic coating using a specially formulated copper
as the conductive agent for superior performance in electric field and
RF shielding. Developed initially as an RFI/EMI shield for plastic
electronic equipment housings, it can be applied directly onto acrylic,
ABS and structural foams, as well as solvent sensitive materials such
as polycarbonate and polystyrene. Can also be applied to other
non-porous surfaces including primed wallboard, wood and clean metals.
Can be applied by sprayer, brush or roller just like ordinary latex
paint! Just as safe to handle, too. Thin with water. Amazing surface
resistivity of |
159.95 |
View |
|
|
Cupro-Cote Paint - 4 Oz
This is a sprayable, brushable, or rollable conductive metallic coating using a specially formulated copper
as the conductive agent for superior performance in electric field and
RF shielding. Developed initially as an RFI/EMI shield for plastic
electronic equipment housings, it can be applied directly onto acrylic,
ABS and structural foams, as well as solvent sensitive materials such
as polycarbonate and polystyrene. Can also be applied to other
non-porous surfaces including primed wallboard, wood and clean metals.
Can be applied by sprayer, brush or roller just like ordinary latex
paint! Just as safe to handle, too. Thin with water. Amazing surface
resistivity of |
29.95 |
View |
|
Snap/Ring Terminal Combo
Want a tidy and good looking way to attach a ground cord to a
conductive fabric or plastic shield? This simple hardware combination
does the trick in style. First, crimp the provided ring terminal to
your ground wire. Next, punch a small hole in your conductive sheet.
Pass the stud of the snap through this hole and through the ring
terminal. Finally, apply the other half of the snap. Makes good contact
and you can move it or remove it as needed. Snap is nickel plated for
excellent corrosion resistance and is washable.
Ground wire not
included.
|
2.00 |
View |
|
Grounding Clamp
Copper plated clamp with good jaw tension capable of grabbing ?" to 1"
diameter pipe, screw or bar. Use these to attach ground cord to your
plumbing, or to metal stakes in the ground. Crimps easily to cord. 3"
length overall.
Ground cord not
included.
|
4.95 |
View |
|
Shielded Plug Cord
Typical lamp cords, appliance cords, even the cord to your alarm clock
emit strong electric fields even if the appliance is turned off.
Replacing the cord with a shielded cord eliminates this source of
electric field. Replacement is simple, but does require basic knowledge
of wiring.
Our recycled shielded cords are rated for 10 amps, 6 ft long. 3-prong
plug on one end, other end cut. Internal metallic shielding. Black
vinyl.
|
4.95 |
View |
|
Alligator Clips - Pair
High quality alligator clips for grounding and conductivity uses. Will grab foils, fabrics,
chassis, grounding wires, screws, and small posts.
Attach to just about any copper wire with solder or crimp. Each pack contains a pair of alligator clips.
|
2.00 |
View |
|
|
Ring Terminal - Pair
Each pack contains a pair of ring terminals |
2.95 |
View |
|
Ex-static Fabric
A light weight, durable conductive fabric. 87% polyester, 13% gray BASF
Resistat (carbon) fibers woven right into the fabric in an attractive
diamond pattern providing surface resistivity of 105
ohms per square. Very comfortable, only 3 oz per square yard, it cuts,
sews, and washes like any polyester fabric! Conductivity will hold up
to 50 or more low heat washings. Can be used to make E-field shielding
bedding, appliance covers, clothing, drapes, room dividers, and
anything else you can sew. Some people claim they can sleep noticeably
better when they sandwich conductive fabric into their bedsheets. One
woman we know wears it on her head as a scarf and swears it reduces EMF
noise for her! Available in 60" width. Color is White with Gray diamond
pattern.
|
4.95 |
View |
|
|
Ex-static Fabric - 100' roll
A light weight, durable conductive fabric in a 100' roll. 87% polyester, 13% gray BASF
Resistat (carbon) fibers woven right into the fabric in an attractive
diamond pattern providing surface resistivity of 105
ohms per square. Very comfortable, only 3 oz per square yard, it cuts,
sews, and washes like any polyester fabric! Conductivity will hold up
to 50 or more low heat washings. Can be used to make E-field shielding
bedding, appliance covers, clothing, drapes, room dividers, and
anything else you can sew. Some people claim they can sleep noticeably
better when they sandwich conductive fabric into their bedsheets. One
woman we know wears it on her head as a scarf and swears it reduces EMF
noise for her! Available in 60" width. Color is White with Gray diamond
pattern.
|
371.25 |
View |
|
Clear-Shield™ with Adhesive
1210-49 $39.95 per lin ft
1210-98 $2936.32 - 98sf (save 25%)
The perfect clear shielding material for radiowave and low frequency electric field shielding. Flexible plastic film, light weight and easy to trim to any desired shape or size. Clear liner can be removed to expose adhesive for attachment to windows, compputer screens, mobile devices, and more. So clear that it is safe to use for automobile windows as well. Attach a ground cord for maximum performance.
Visible light transmitted: 75% and only 8% reflected (low glare).
Conductive surface: 13 Ohms per sq
Thickness: 105 microns
Scratch-resistant hard coating
Sold per linear foot, big enough for the big screen TV! |
39.95 |
View |
|
Conductive Tubing
Composed of electrically conductive black polyethylene and great for
shielding electrical cords. It's easy to slide any electrical cord
(even fits those giant dryer plugs!) through this 4" wide (when flat)
sleeve without having to remove the plug from the end of the cord.
Surface resistivity <1000 ohms/square. Only 4 mil thick, it won't
hold up to tearing, heat or abuse, but it's tough enough to do a great
job on the lamp cord by your bed, the air conditioner cord, or even
cables in your car. Use a grounding cable, and please be careful when
handling electrical cords.
|
1.15 |
View |
|
ScotchTint - 40" x 100' roll
Most
RF entering a room will come through the windows. Shielding the windows
is the logical first step to reduce your exposure. Don't want to
replace the whole window to get good shielding? Cut ScotchTint to size,
peel the backing, wet, and apply to your clean windows, doors, or other
glass surfaces to block wide range of radiofrequency radiation.
Provides certified 22+ dB reduction at cell phone frequencies and
tested from at least 30 MHz to 4.5 GHz.
The benefits of window shielding include
controlling heat gain or loss, and improved safety, security, energy
efficiency, and appearance of your building. Window tint rejects up to
79% of the heat that would otherwise come through the window. That can
translate into a savings of about one ton of air conditioning for every
100 square feet of glass exposed to sunlight. ScotchTint? window tint
also keeps you warmer in the winter months by reflecting manmade heat
back into the building. This can reduce heat loss by up to 30% to save
you money and improve occupant comfort.
By
blocking out 98% of UV light, it protect from the sun's harmful rays
and significantly reduces fabric and furniture fade. In addition,
ScotchTint? window films reduce glare to improve your indoor
visibility, especially with respect to computer monitors and
televisions.
If you can wallpaper a room, you can shield your windows. Easy to trim
to size with scissors or blade. Optional professional installation
available in most areas at additional cost if you don?t feel like doing
it yourself. Can also be used without activating the adhesive. The
perfect complement to shielded walls. Silver/blue tint and comes in 100' roll.
ScotchTint Shielding Performance
Frequency
Attenuation
Frequency
Attenuation
30 MHz
24 dB
1 GHz
24 dB
100 MHz
22 dB
2.5 GHz
26 dB
300 MHz
22 dB
4.5 GHz
27 dB
|
640.00 |
View |
|
EarthSafe
We all know that our bodies are very delicate electromagnetic senders and receivers. And
each of us is different, even unique, in the ways in which our bodies interact with the
electromagnetic environment. By creating a Schumann device with a variable capacitor,
the EarthSafe has the unique ability to be tuned from about 2 Hz to over 20 Hz,
to produce the exact frequency that will give maximum benefit to your specific body.
And it can be re-adjusted in seconds at any time, for any new circumstance, including the
changes taking place in the Earth's natural field. You may notice a difference immediately.
Some people have said that it feels as though an invisible weight has been lifted off their
shoulders. Irritability, eye strain, and general tiredness from using electrical appliances
can feel lessened. Lightweight (only 6 oz.), it goes with
you wherever you go. Amazing 6-foot radius of effectiveness! Tuning is easily done with simple
muscle testing. Tune up your protective energy field with EarthSafe. 9V battery included, made in USA.
"Whole House"-sized units cover a larger area and plugs into an AC outlet.
|
169.99 |
View |
|
EMF in Your Enviroment
This publication, produced by the EPA, presents helpful pieces of the
EMF puzzle - information about how magnetic field strengths of various
everyday appliances compare with each other, and how their strength
diminishes the farther away you are from these appliances. 32 page photocopy pamphlet. 1992
|
3.50 |
View |
|
Q&A: EMF in the Workplace
Government publication which tends to lean in favor of the idea that EMF dangers are unproven.
Even so, it is written in clear non-technical language with good graphics explaining the concepts of EMF basics,
current health study findings especially with respect to workplace
settings, ongoing research, and an extensive listing of scientific references. 66 pages, photocopy. 1996
|
4.95 |
View |
|
|
Working Safely with VDTs
In an effort to inform employers and employees, this booklet briefly examines the hazards associated with computer monitor screens with emphasis on EMFs. Suggests specific interventions, and tells where to get free help from various government agencies regarding recognizing and correcting EMF safety hazards. Especially suited for EMF issues in the workplace. 17 pages. Photocopy 1991
|
3.50 |
View |
|
|
Fields From Electric Power
Discusses in non-technical language: what is known, what is still not known, and what might be done about possible risk to health and environment. Prepared with funding from EPRI and National Science Foundation, it has an admitted bias towards "there is no problem", but still contains some good solid even if skeptical science in a readable format. 1989
|
10.95 |
View |
|
|
Measuring Power-Frequency Fields
Many people want to know how EMF readings in their home compare to fields found in other homes or workplaces. Knowing this may help you decide if your situation is unusual. Making measurements may help you develop some simple strategies to avoid some fields. Discusses what fields are, where they come from, comparisons of findings in various home and workplace settings, and a little about what is know about health risks. Useful reading for any gaussmeter user, but biased toward the idea that EMFs are not a problem. 1992
|
4.95 |
View |
|
|
What Can We Conclude From Measurements of Power Frequency Fields?
In another attempt to calm fears about EMF exposure, "What Can We Conclude From Measurements of Power Frequency Fields?" explores the question: Is there a risk? Fairly strongly biased scientific arguments against EMF hazards. Ironically, the author states that based on his understanding, he has moved his computer further away, moved his son's bed away from the powerlines in the street, changed his bedside clock, and has done other EMF reducing maneuvers. 1993 |
4.95 |
View |
|
|
EMF from 60Hz Electrical Power
A quick synopsis of the health effects of electric and magnetic fields. Includes discussions of why weak fields may not be safer than strong fields, risks to farm crops and animals, and a nice section on what mitigation could/should be done. 1989. 17 pages.
|
6.95 |
View |
|
|
Your Guide to Understanding EMF
A simple yet thorough explanation of what are EMFs, what is the difference between electric and magnetic fields, and where do they come from. A nice primer on the topic, great for students. 16 pages, photocopy.
|
4.95 |
View |
|
Warning: The Electricity Around You May be hazardous to Your Health
Originally published in 1992 and now in it's 3rd edition, this investigative journalist has revised, improved, and expanded her original work and made it available once again. Clearly written for the non-technical reader but absolutely right on with useful and practical information for understanding, detecting, and reducing EMFs. Topics include: EMF controversy explained, how to do an EMF survey, what do the studies prove?, managing EMFs at work, and current EMF litigation. Comprehensive and relevant. Highly recommended. 2004.
|
19.95 |
View |
|
Tracing EMFs in Building Wiring and Grounding 2nd Edition
A practical guide for reducing AC magnetic fields produced by building wiring and improper grounding practices. Step by step instructions for detecting wiring problems and a full description of common wiring errors and how to correct them. This guide is for anyone who wants to inspect their own home, electricians and electrical inspectors, those starting a new profession in EMF consulting, as well as those involved with the process of building construction such as architects and contractors. Utility personnel involved in EMF measurements can profit from this information. 96 pages, spiral bound book. Completely updated in 2005. |
28.00 |
View |
|
|
Tracing EMFs in Building Wiring Video
This video graphically explains how certain wiring errors create high magnetic fields. It shows step-by-step methods of measuring the fields and then how to find the faulty circuit and the wiring error. Created under a grant from California Health Services to help school electricians reduce the magnetic fields found in the state's schools during a 90-school magnetic field survey. Filmed by the video dept. of Southern California Edison and using their graphics animation to show how the currents move in misconnected circuits. Written and hosted by Karl Riley, author of Tracing EMFs in Building Wiring and Grounding. VHS 23 minutes.
|
19.95 |
View |
|
|
Magnetic Field Guide
Could have been called: "What to Do with Your New Gaussmeter". A general introduction to the measurement of magnetic fields in home and work environments. Explains in detail how to use a gaussmeter; gives hints about measuring fields in homes, schools, and offices; and offers useful background information on risks, mitigation, and magnetic fields. A great manual to accompany any gaussmeter purchase. 1993
|
12.50 |
View |
|
|
EMF Measurement in the Near Field
In this book, internationally respected EMF measurement expert Hubert Trzaska discusses the specific problems of EMF measurements in the often confusing near field and the main factors limiting measurement accuracy. Book describes methods that provide accurate data to aid the development of new, improved standards. Measuring methods are examined for electric fields and magnetic fields; measurement discussions include power density and photonic EMF measurements. 232 pages, 2001
|
75.00 |
View |
|
Electrical Sensitivity Handbook
Discusses the illness of Electrical Sensitivity: what it is, how it is caused, how to prevent it, and what to do if you have it. Written by a woman who experiences it first-hand and used to publishe an international newsletter on the subject. Lots of good sensible advice, backed by years of investigation. This is a great book to show your family, employer, attorney, or physician to help them understand what you are going through. References. 1995
|
23.00 |
View |
|
|
Microwave Sickness
A five-part series from Electrical Sensitivity News reviewing Soviet and East European findings about the health effects of microwaves. Explains in straightforward language what the research uncovered and why the RF safety standards of the region are 1000 fold more stringent than in the US. Makes an excellent supplement to the information in The Electrical Sensitivity Handbook. 15 pages. 1996
|
12.00 |
View |
|
Great Powerline Cover-Up
First he exposed the asbestos industry. Now Paul Brodeur reveals the dangers of high voltage and high current power lines and industry's attempts to cover them up. Tough and highly controversial, Paul Brodeur's book vividly documents EMF tragedies all across the nation-and exposes the massive cover-up undertaken by the electric utilities and their government allies. Brodeur focuses on a wide variety of cases-particularly those in which children are at risk; and shows how local, state, and federal officials have unscrupulously ignored the data, downplaying disease among school children, stifling scientific investigations, and hobbling the E.P.A. He concludes with incisive policy recommendations on ways to resolve the power-line health crisis. An in-depth follow-up to Currents of Death, on the growing body of evidence showing the harm caused by high voltage powerlines. Excellent documentation and abundant citations. 351 pp. 1993
|
12.95 |
View |
|
|
FCC Bulletin 65
This bulletin, provides assistance in determining whether FCC-regulated transmitting facilities, operations and devices comply with limits adopted by the Commission in 1996 for human exposure to radiofrequency (RF) electromagnetic fields. One of the areas discussed in Bulletin 65 is compliance with the limits adopted by the Commission for safe exposure to RF emissions from mobile and portable devices, such as non-fixed wireless transmitters and hand-held cellular telephones.
Supplement C, entitled, "Additional Information for Evaluating Compliance of Mobile and Portable Devices with FCC Limits for Human Exposure to Radiofrequency Emissions." is included which provides further guidance for use by applicants for FCC equipment authorization in evaluating these devices for compliance with RF safety limits. 84 pages 1997.
|
15.00 |
View |
|
|
FCC Bulletin 56
This is an informative bulletin written as a result of increasing interest and concern of the public with respect to this issue. The expanding use of radiofrequency technology has resulted in speculation concerning the alleged "electromagnetic pollution" of the environment and the potential dangers of exposure to non-ionizing radiation. This publication is designed to provide factual information to the public by answering some of the most commonly asked questions such as What biological effects can be caused by radiation?, What are safe levels for exposure to radiofrequency/ microwave radiation?, How safe is the radiofrequency radiation emitted by radio and television broadcasting antennas? and much more. 38 pages, 1999.
|
14.00 |
View |
|
NIST Report #3
Laboratory studies of electromagnetic (EM) signal propagation through construction materials were carried out as part of the NIST initiative. In this report, power attenuation aspects are discussed. The materials investigated included brick, masonry block, eight different concrete mixes, glass, plywood, lumber (spruce-pine-fir), drywall, reinforced concrete, steel reinforcing bar grids, variations of the plywood and lumber tests in which the specimens were soaked with water, and composite specimens involving brick-faced masonry block and brick-faced concrete. For each material, varying thickness specimens were fabricated in order to measure attenuation as a function of penetration distance. Measurements of power loss were taken at 2 MHz intervals from 0.5 to 2 GHz and from 3 to 8 GHz. Frequency power spectra were discretely generated for each material as a function of thickness. Excellent tables and graphical data. Extremely useful for predicting the shielding effectiveness of common building materials. 200 pages, 1997.
|
20.00 |
View |
|
Q-Link Black
Free Shipping on this Item!**USA 48 States only
Buy now and get the Wave Shield 2000 Gold FREE!!
Beware of imitators. These are guaranteed to be the original Brand name Qlink product you trust!
The latest edition to our product line : All-New Styling!
Durable, Waterproof, Light-Weight
No Batteries or Maintenance Required
Formaldehyde-free, Bio-Compatible Acrylic
Dual Tone Design
Includes black silk comfort cord
NEXT GENERATION SRT 3
How Is It Better?
Next Generation SRT 3 is 20% stronger than SRT 2.
The Next-Generation SRT 3 programming is an improvement over SRT2 and will enable the device to more efficiently resonate life-supporting frequencies in the biofield and activate a more powerful response to stress. Most people will notice heightened energy, quicker effects, and a more rapid return to centered emotional balance.
One analogy to this technological upgrade can be seen in the way computers become faster and more efficient. Even though new processors with greater capabilities are released, their predecessors continue to perform their intended function.
In this light, SRT 2 is still highly effective, yet not as advanced as SRT 3.
We know how well the Q Link pendants work and guarantee they will protect you from EMF
and allow you to be more centered and balanced and you have a money back guarantee for
90 days.
"Returns: Q Link products are very effective and we get under a 1% return. If you return your product, it must be accompanied by the free gift (unopened) in unused condition or there will be a $15 charge. It must be accompanied with all its packaging and related paperwork to receive a refund"
" The New QLink will ship in approximately 7 days"
Free Shipping on this Item!**USA 48 States only
Remember to select the Shipping option 'Free Shipping' in the checkout area or you will not receive Free Shipping for this product. |
99.95 |
View |
|
AegisGuard LS Radiation Shields (1 fl oz)
AegisGuard? LS Radiation Shields are a safe, convenient and easy to apply spray that provides an unsurpassed level of shielding protection from the radiation emitted by any electronic product operating at the frequencies and power levels shown below. The applications for AegisGuard? LS Radiation Shields are virtually unlimited.
AegisGuard? LS Radiation Shields
Specifications
Operating
Frequency
Maximum Radiated Output
Power Level Tested
Shielding
Effectiveness
5 Hz. to 100 Hz.
25.0 Watts
Up to 99.998%
Up to 2.6 GHz.
25.0 Watts
Up to 99.996%
Up To 7.2 GHz.
25.0 Watts
Up to 99.993%
Up to 15 GHz.
25.0 Watts
Up to 99.990%
Environmental:
Temperature - After Installation
-20 o to +140 oF
Minimum Storage Temperature
65 oF
When properly applied it provides outstanding radiation shielding protection within the supported frequency ranges without affecting product performance, power consumption, or wireless product signal strength. Since the appearance of electronic products such as cellular phones are not altered, it is also the perfect precautionary safety measure for protecting children who resist changing the appearance of the products they use.
One spray application is required for surfaces such as painted ceilings, walls, and many products found in homes, offices and factories that are never washed or become wet. AegisGuard? LS should be reapplied to frequently handled products periodically such as wireless phones, handhelds, pagers and headsets that are not used with a protective outer case, and it must be reapplied if the product is washed or becomes wet from excessive sweat, rain, etc. The use of a protective outer case with these types of products is recommended if you sweat heavily.
The following recommendations are provided for your safety to ensure optimum shielding effectiveness and protection at all times when using frequently handled wireless products. For reference and depending upon its dimensions, a cellular phone can be sprayed 15 - 20 times and a typical pager can be sprayed 40 times using a 1 FL OZ bottle. A typical tower computer requires one 2 FL OZ to spray the front and one side, while an 8 x 10 foot wall or ceiling requires four 8 FL OZ bottles.
Hypoallergenic AegisGuard? LS Radiation Shields do not contain any animal by-products, fluorocarbons, Nickel or MDF , nor is it harmful to humans or animals in any manner whatsoever. It is completely safe to use and t here has never been an allergic reaction or an effect upon wireless product signal strength or the skin reported by any user. Simply spray your electronic product with the power off and wipe dry. It will not stain any fabric after your electronic product is wiped dry and although it is safe enough to leave on your skin, it completely washes off with soap and warm water. It easily washes out of most fabrics with warm water and laundry detergent if a cloth is used to wipe the product dry instead of a paper towel. AegisGuard? LS Radiation Shields are compatible with all other AegisGuard? radiation shielding products. |
39.95 |
View |
|
AegisGuard LS Radiation Shields (2 fl oz)
AegisGuard? LS Radiation Shields are a safe, convenient and easy to apply spray that provides an unsurpassed level of shielding protection from the radiation emitted by any electronic product operating at the frequencies and power levels shown below. The applications for AegisGuard? LS Radiation Shields are virtually unlimited.
AegisGuard? LS Radiation Shields
Specifications
Operating
Frequency
Maximum Radiated Output
Power Level Tested
Shielding
Effectiveness
5 Hz. to 100 Hz.
25.0 Watts
Up to 99.998%
Up to 2.6 GHz.
25.0 Watts
Up to 99.996%
Up To 7.2 GHz.
25.0 Watts
Up to 99.993%
Up to 15 GHz.
25.0 Watts
Up to 99.990%
Environmental:
Temperature - After Installation
-20 o to +140 oF
Minimum Storage Temperature
65 oF
When properly applied it provides outstanding radiation shielding protection within the supported frequency ranges without affecting product performance, power consumption, or wireless product signal strength. Since the appearance of electronic products such as cellular phones are not altered, it is also the perfect precautionary safety measure for protecting children who resist changing the appearance of the products they use.
One spray application is required for surfaces such as painted ceilings, walls, and many products found in homes, offices and factories that are never washed or become wet. AegisGuard? LS should be reapplied to frequently handled products periodically such as wireless phones, handhelds, pagers and headsets that are not used with a protective outer case, and it must be reapplied if the product is washed or becomes wet from excessive sweat, rain, etc. The use of a protective outer case with these types of products is recommended if you sweat heavily.
The following recommendations are provided for your safety to ensure optimum shielding effectiveness and protection at all times when using frequently handled wireless products. For reference and depending upon its dimensions, a cellular phone can be sprayed 15 - 20 times and a typical pager can be sprayed 40 times using a 1 FL OZ bottle. A typical tower computer requires one 2 FL OZ to spray the front and one side, while an 8 x 10 foot wall or ceiling requires four 8 FL OZ bottles.
Hypoallergenic AegisGuard? LS Radiation Shields do not contain any animal by-products, fluorocarbons, Nickel or MDF , nor is it harmful to humans or animals in any manner whatsoever. It is completely safe to use and t here has never been an allergic reaction or an effect upon wireless product signal strength or the skin reported by any user. Simply spray your electronic product with the power off and wipe dry. It will not stain any fabric after your electronic product is wiped dry and although it is safe enough to leave on your skin, it completely washes off with soap and warm water. It easily washes out of most fabrics with warm water and laundry detergent if a cloth is used to wipe the product dry instead of a paper towel. AegisGuard? LS Radiation Shields are compatible with all other AegisGuard? radiation shielding products. |
74.95 |
View |
|
AegisGuard LS Radiation Shields (4 fl oz)
AegisGuard? LS Radiation Shields are a safe, convenient and easy to apply spray that provides an unsurpassed level of shielding protection from the radiation emitted by any electronic product operating at the frequencies and power levels shown below. The applications for AegisGuard? LS Radiation Shields are virtually unlimited.
AegisGuard? LS Radiation Shields
Specifications
Operating
Frequency
Maximum Radiated Output
Power Level Tested
Shielding
Effectiveness
5 Hz. to 100 Hz.
25.0 Watts
Up to 99.998%
Up to 2.6 GHz.
25.0 Watts
Up to 99.996%
Up To 7.2 GHz.
25.0 Watts
Up to 99.993%
Up to 15 GHz.
25.0 Watts
Up to 99.990%
Environmental:
Temperature - After Installation
-20 o to +140 oF
Minimum Storage Temperature
65 oF
When properly applied it provides outstanding radiation shielding protection within the supported frequency ranges without affecting product performance, power consumption, or wireless product signal strength. Since the appearance of electronic products such as cellular phones are not altered, it is also the perfect precautionary safety measure for protecting children who resist changing the appearance of the products they use.
One spray application is required for surfaces such as painted ceilings, walls, and many products found in homes, offices and factories that are never washed or become wet. AegisGuard? LS should be reapplied to frequently handled products periodically such as wireless phones, handhelds, pagers and headsets that are not used with a protective outer case, and it must be reapplied if the product is washed or becomes wet from excessive sweat, rain, etc. The use of a protective outer case with these types of products is recommended if you sweat heavily.
The following recommendations are provided for your safety to ensure optimum shielding effectiveness and protection at all times when using frequently handled wireless products. For reference and depending upon its dimensions, a cellular phone can be sprayed 15 - 20 times and a typical pager can be sprayed 40 times using a 1 FL OZ bottle. A typical tower computer requires one 2 FL OZ to spray the front and one side, while an 8 x 10 foot wall or ceiling requires four 8 FL OZ bottles.
Hypoallergenic AegisGuard? LS Radiation Shields do not contain any animal by-products, fluorocarbons, Nickel or MDF , nor is it harmful to humans or animals in any manner whatsoever. It is completely safe to use and t here has never been an allergic reaction or an effect upon wireless product signal strength or the skin reported by any user. Simply spray your electronic product with the power off and wipe dry. It will not stain any fabric after your electronic product is wiped dry and although it is safe enough to leave on your skin, it completely washes off with soap and warm water. It easily washes out of most fabrics with warm water and laundry detergent if a cloth is used to wipe the product dry instead of a paper towel. AegisGuard? LS Radiation Shields are compatible with all other AegisGuard? radiation shielding products. |
140.95 |
View |
|
AegisGuard LS Radiation Shields (8 fl oz)
AegisGuard? LS Radiation Shields are a safe, convenient and easy to apply spray that provides an unsurpassed level of shielding protection from the radiation emitted by any electronic product operating at the frequencies and power levels shown below. The applications for AegisGuard? LS Radiation Shields are virtually unlimited.
AegisGuard? LS Radiation Shields
Specifications
Operating
Frequency
Maximum Radiated Output
Power Level Tested
Shielding
Effectiveness
5 Hz. to 100 Hz.
25.0 Watts
Up to 99.998%
Up to 2.6 GHz.
25.0 Watts
Up to 99.996%
Up To 7.2 GHz.
25.0 Watts
Up to 99.993%
Up to 15 GHz.
25.0 Watts
Up to 99.990%
Environmental:
Temperature - After Installation
-20 o to +140 oF
Minimum Storage Temperature
65 oF
When properly applied it provides outstanding radiation shielding protection within the supported frequency ranges without affecting product performance, power consumption, or wireless product signal strength. Since the appearance of electronic products such as cellular phones are not altered, it is also the perfect precautionary safety measure for protecting children who resist changing the appearance of the products they use.
One spray application is required for surfaces such as painted ceilings, walls, and many products found in homes, offices and factories that are never washed or become wet. AegisGuard? LS should be reapplied to frequently handled products periodically such as wireless phones, handhelds, pagers and headsets that are not used with a protective outer case, and it must be reapplied if the product is washed or becomes wet from excessive sweat, rain, etc. The use of a protective outer case with these types of products is recommended if you sweat heavily.
The following recommendations are provided for your safety to ensure optimum shielding effectiveness and protection at all times when using frequently handled wireless products. For reference and depending upon its dimensions, a cellular phone can be sprayed 15 - 20 times and a typical pager can be sprayed 40 times using a 1 FL OZ bottle. A typical tower computer requires one 2 FL OZ to spray the front and one side, while an 8 x 10 foot wall or ceiling requires four 8 FL OZ bottles.
Hypoallergenic AegisGuard? LS Radiation Shields do not contain any animal by-products, fluorocarbons, Nickel or MDF , nor is it harmful to humans or animals in any manner whatsoever. It is completely safe to use and t here has never been an allergic reaction or an effect upon wireless product signal strength or the skin reported by any user. Simply spray your electronic product with the power off and wipe dry. It will not stain any fabric after your electronic product is wiped dry and although it is safe enough to leave on your skin, it completely washes off with soap and warm water. It easily washes out of most fabrics with warm water and laundry detergent if a cloth is used to wipe the product dry instead of a paper towel. AegisGuard? LS Radiation Shields are compatible with all other AegisGuard? radiation shielding products. |
261.95 |
View |
|
AegisGuard XP Radiation Shields (3 x 6 in.)
Placed between the body and a wired or wireless product, AegisGuard? XP Radiation Shields provide an unprecedented level of permanent extra protection from the radiation emitted by a broad range of wired and wireless products operating over a wide spectrum of frequencies and power levels. They do not contain Nickel or MDF. Incorporating a hypoallergenic multi-layer reflective shielding composition developed for commercial and military applications that has no effect upon performance or power consumption, the shielding effectiveness for products operating between 5 Hz. @ 10 Watts to 15 GHz. @ 5 Watts is greater than 99.9%. Shielding applications for frequencies up to 45 GHz. @ 0.5 Watts with a shielding effectiveness greater than 98.8% are supported.
Only 1/8 inches thick and lightweight, AegisGuard? XP Radiation Shields are easily cut to size and shape with scissors. Suitable for a wide range of applications including cellular phones which are never placed against the head, heart pacemakers, transponders and virtually any wired or wireless product, they are used in pockets, pouches, purses or with body style products and include VELCRO fasteners for easily attaching the shield to a product or garment. Many companies have in-house wellness programs to provide their employees with health related facilities, products and information. Millions of people use wireless products for business purposes every day and AegisGuard? Radiation Shields are a perfect addition to these programs.
|
29.95 |
View |
|
AegisGuard XP Radiation Shields (4 x 8 in.)
Placed between the body and a wired or wireless product, AegisGuard? XP Radiation Shields provide an unprecedented level of permanent extra protection from the radiation emitted by a broad range of wired and wireless products operating over a wide spectrum of frequencies and power levels. They do not contain Nickel or MDF. Incorporating a hypoallergenic multi-layer reflective shielding composition developed for commercial and military applications that has no effect upon performance or power consumption, the shielding effectiveness for products operating between 5 Hz. @ 10 Watts to 15 GHz. @ 5 Watts is greater than 99.9%. Shielding applications for frequencies up to 45 GHz. @ 0.5 Watts with a shielding effectiveness greater than 98.8% are supported.
Only 1/8 inches thick and lightweight, AegisGuard? XP Radiation Shields are easily cut to size and shape with scissors. Suitable for a wide range of applications including cellular phones which are never placed against the head, heart pacemakers, transponders and virtually any wired or wireless product, they are used in pockets, pouches, purses or with body style products and include VELCRO fasteners for easily attaching the shield to a product or garment. Many companies have in-house wellness programs to provide their employees with health related facilities, products and information. Millions of people use wireless products for business purposes every day and AegisGuard? Radiation Shields are a perfect addition to these programs.
|
53.95 |
View |
|
AegisGuard Headset Radiation Shields (ear piece and wire shield combination)
AegisGuard? Headset Radiation Shields for wired headsets consist of two individual components; a Wire Shield that fits all cell and cordless phone headset wires, and an Earpiece Shield that fits all EarBud, EarGel and In-The-Ear style headset earpieces (use AegisGuard? LS Radiation Shields for earpieces with a diameter larger than (3/16 in.). They do not contain Nickel or MDF and each component is easily installed without tools. AegisGuard? Headset Wire Shields provide far greater protection than ferrites and should not be confused them. AegisGuard? Headset Wire Shields prevent up to 98% of a cell phone's radiation from being transferred through a headset wire and when used with an Earpiece Shield, up to 99.9% of the radiation emitted from the earpiece is deflected away from the ear.
If you must use a phone while driving, the use of a hands free headset in an automobile is a great idea and required in many places by law. If you are not using your cellular or cordless phone protected with AegisGuard? Radiation Shields, it is also sensible to increase the distance between you and the phone by using a headset. But as Aegis first reported in 1998, if you think using a wired or wireless headset is safer than holding a phone against your ear, think again.
The ABC news show 20/20 aired their first broadcast about cell phone radiation and SAR safety standards in 1999. During the broadcast, a wired headset was attached to a cell phone and SAR tests revealed a reduction in radiation emissions from the phone's earpiece. Surprisingly, emissions from the headset earpiece and wire were not tested. In December, 2000, the British government reversed their endorsement advising consumers to use headsets as safety devices. This occurred after they discovered cell phone wired headsets can channel more than three times the amount of radiation into the head when compared to holding a phone against the ear. Wireless headsets represent an even greater risk because the wire is replaced with a transmitter and receiver operating with low power at frequency levels between 900 MHz. to 2.4 GHz. Microwave ovens operate at 2.4 GHz., and the maximum frequencies for wireless products compliant with Bluetooth and 3G specifications are 2.497 GHz. and 2.17 GHz., respectively.
The headset wire connecting a cell phone and earpiece serves as an antenna that absorbs radiation in the air that surrounds every person. When a headset is used with a cell phone, the radiation generated by the phone and the airborne radiation that surrounds everybody is transferred through the wire or plastic tube connecting the phone and earpiece and penetrates the head directly through the ear canal. Cellular phone headset earpiece emissions into the ear canal can be three times higher than the emissions when placing a phone directly against the ear. |
37.95 |
View |
|
AegisGuard Headset Radiation Shields (Headset Wire Shield)
AegisGuard? Headset Radiation Shields for wired headsets consist of two individual components; a Wire Shield that fits all cell and cordless phone headset wires, and an Earpiece Shield that fits all EarBud, EarGel and In-The-Ear style headset earpieces (use AegisGuard? LS Radiation Shields for earpieces with a diameter larger than (3/16 in.). They do not contain Nickel or MDF and each component is easily installed without tools. AegisGuard? Headset Wire Shields provide far greater protection than ferrites and should not be confused them. AegisGuard? Headset Wire Shields prevent up to 98% of a cell phone's radiation from being transferred through a headset wire and when used with an Earpiece Shield, up to 99.9% of the radiation emitted from the earpiece is deflected away from the ear.
If you must use a phone while driving, the use of a hands free headset in an automobile is a great idea and required in many places by law. If you are not using your cellular or cordless phone protected with AegisGuard? Radiation Shields, it is also sensible to increase the distance between you and the phone by using a headset. But as Aegis first reported in 1998, if you think using a wired or wireless headset is safer than holding a phone against your ear, think again.
The ABC news show 20/20 aired their first broadcast about cell phone radiation and SAR safety standards in 1999. During the broadcast, a wired headset was attached to a cell phone and SAR tests revealed a reduction in radiation emissions from the phone's earpiece. Surprisingly, emissions from the headset earpiece and wire were not tested. In December, 2000, the British government reversed their endorsement advising consumers to use headsets as safety devices. This occurred after they discovered cell phone wired headsets can channel more than three times the amount of radiation into the head when compared to holding a phone against the ear. Wireless headsets represent an even greater risk because the wire is replaced with a transmitter and receiver operating with low power at frequency levels between 900 MHz. to 2.4 GHz. Microwave ovens operate at 2.4 GHz., and the maximum frequencies for wireless products compliant with Bluetooth and 3G specifications are 2.497 GHz. and 2.17 GHz., respectively.
The headset wire connecting a cell phone and earpiece serves as an antenna that absorbs radiation in the air that surrounds every person. When a headset is used with a cell phone, the radiation generated by the phone and the airborne radiation that surrounds everybody is transferred through the wire or plastic tube connecting the phone and earpiece and penetrates the head directly through the ear canal. Cellular phone headset earpiece emissions into the ear canal can be three times higher than the emissions when placing a phone directly against the ear. |
29.95 |
View |
|
AegisGuard Headset Radiation Shields (Headset In-The-Ear Earpiece Shields)
AegisGuard? Headset Radiation Shields for wired headsets consist of two individual components; a Wire Shield that fits all cell and cordless phone headset wires, and an Earpiece Shield that fits all EarBud, EarGel and In-The-Ear style headset earpieces (use AegisGuard? LS Radiation Shields for earpieces with a diameter larger than (3/16 in.). They do not contain Nickel or MDF and each component is easily installed without tools. AegisGuard? Headset Wire Shields provide far greater protection than ferrites and should not be confused them. AegisGuard? Headset Wire Shields prevent up to 98% of a cell phone's radiation from being transferred through a headset wire and when used with an Earpiece Shield, up to 99.9% of the radiation emitted from the earpiece is deflected away from the ear.
If you must use a phone while driving, the use of a hands free headset in an automobile is a great idea and required in many places by law. If you are not using your cellular or cordless phone protected with AegisGuard? Radiation Shields, it is also sensible to increase the distance between you and the phone by using a headset. But as Aegis first reported in 1998, if you think using a wired or wireless headset is safer than holding a phone against your ear, think again.
The ABC news show 20/20 aired their first broadcast about cell phone radiation and SAR safety standards in 1999. During the broadcast, a wired headset was attached to a cell phone and SAR tests revealed a reduction in radiation emissions from the phone's earpiece. Surprisingly, emissions from the headset earpiece and wire were not tested. In December, 2000, the British government reversed their endorsement advising consumers to use headsets as safety devices. This occurred after they discovered cell phone wired headsets can channel more than three times the amount of radiation into the head when compared to holding a phone against the ear. Wireless headsets represent an even greater risk because the wire is replaced with a transmitter and receiver operating with low power at frequency levels between 900 MHz. to 2.4 GHz. Microwave ovens operate at 2.4 GHz., and the maximum frequencies for wireless products compliant with Bluetooth and 3G specifications are 2.497 GHz. and 2.17 GHz., respectively.
The headset wire connecting a cell phone and earpiece serves as an antenna that absorbs radiation in the air that surrounds every person. When a headset is used with a cell phone, the radiation generated by the phone and the airborne radiation that surrounds everybody is transferred through the wire or plastic tube connecting the phone and earpiece and penetrates the head directly through the ear canal. Cellular phone headset earpiece emissions into the ear canal can be three times higher than the emissions when placing a phone directly against the ear. |
24.95 |
View |
|
The EarthCalm Resonator Scalar - Necklace
A note from the inventor of EarthCalm Products | EarthCalm Testimonials | EarthCalm FAQ's | EarthCalm Brochure | What is the Schumann Resonance? | What is the difference between an EarthCalm Resonator and the Q-Link pendant? | Cell Phone and Cordless Phone protection | Headaches & Migraines | Fibromyalgia & Electrical Sensitivity | Children, ADHD & Asthma | Protect yourself
Free Shipping on this Item!
"EarthCalm products never need "recharging" and are offered with a 90 day money back guarantee to encourage you to experiment with this product yourself. This item can be returned in 90 days for a credit minus a $7.99 shipping fee for the 48 States."
Get 10% off when you buy TWO or more EarthCalm productsWe give you this 10% off package using the EarthCalm Home or Office Unit and the EarthCalm Resonator as the combination of these items produces better results
The EarthCalm Scalar Resonator is our maximum strength personal pendant. It consists of the 7 EarthCalm circuits exactly matched by another set of 7 circuits to access Scalar Resonance Technology.
A scalar wave is generated whenever one wave is matched in frequency and amplitude by another wave such that they cancel each other out. The result is not zero, but rather another dimension is activated, which is non local (everywhere at once) and is theorized to be responsible for healing. A biological example of scalar grounding occurs when the left and right sides of a person's nervous system are balanced, exhibited by a balanced spine. This “straight” structure of the spine allows for more optimal functioning. The Scalar Resonator helps bring your spine into balance as well as hold chiropractic adjustments. The Scalar Resonator utilizes Scalar Resonance Technology (14 matching circuits) to maximize protection from EMFs by amplifying your grounding into the earth.
NOTE: Generally people have one of two different reactions to the EarthCalm Scalar Resonator:
(1) Although more intense, if you are generally healthy you will feel the same type of effects as with our basic EarthCalm Resonator while experiencing a deeper level of healing. Many people initially notice a feeling of warmth, relaxation, tingling or lightheadedness due to the removal of the constriction of EMFs on the nervous system. Then within minutes comes an increased sense of calmness and well being as you ground into the earth’s magnetic field. Many people report within minutes relief from arthritis, headaches or old injuries. Within weeks, people experience an overall rejuvenation of bodily function.
(2) Some people may feel a sense of tension. In this case the Scalar Resonator brings in so much healing energy all at once your nervous system is slow to adjust especially if you have a weakened immune system (such as is the case with fibromyalgia or if you self-diagnose as electrically sensitive). If this happens, then the EarthCalm Scalar Home Protection System would be a more appropriate place to begin, or just wear the Scalar Resonator for a few minutes or hours at a time until you can wear it comfortably all the time.
EarthCalm products never need recharging and are offered with a 90 day money back guarantee to afford you the time to monitor the effectiveness yourself. Note and jot down your specific symptoms now, and then compare them after wearing our Scalar Resonator for several weeks to determine the effectiveness for yourself.
Notice to Researchers: EarthCalm is looking for a reputable Research Team who would be willing to conduct scientific research on the efficacy of EarthCalm Home Protectors for ADHD and Asthmatic conditions in children.
"Returns: When returning this product it must be accompanied with all its packaging and related paperwork to receive a refund" |
249.00 |
View |
|
The Earthcalm Scalar Unit for EMF sensitive people
A note from the inventor of EarthCalm Products | EarthCalm Testimonials | EarthCalm FAQ's | EarthCalm Brochure | What is the Schumann Resonance? | What is the difference between an EarthCalm Resonator and the Q-Link pendant? | Cell Phone and Cordless Phone protection | Headaches & Migraines | Fibromyalgia & Electrical Sensitivity | Children, ADHD & Asthma | Protect yourself
Free Shipping on this Item!
Get 10% off when you buy TWO or more EarthCalm productsWe give you this 10% off package using the EarthCalm Home or Office Unit and the EarthCalm Resonator as the combination of these items produces better results
"EarthCalm products never need "recharging" and are offered with a 90 day money back guarantee to encourage you to experiment with this product yourself. This item can be returned in 90 days for a credit minus a $7.99 shipping fee for the 48 States."
The Scalar Home Protection System includes a three-step system to moderate the adjustment period, which is important to everybody but essential for people who are electrically sensitive or who have immune deficiency problems. Because it provides full 14 circuit protection the System is also ideal for families with young children. Children are more vulnerable to EMFs than adults due to their developing nervous systems. Given the current high exposure levels in schools and in the home, it is important to provide them with maximum protection.
The Scalar Home Protection System is ideal in the sense that you simply install the System and forget about it. No need to worry about children or young adults losing Resonators, etc. Parents sometimes ask if their children need Resonators at school. Because healing occurs for the most part during sleep, it is not necessary for children or teenagers to have personal protection while at school. When they get older and work in front of a computer, then a personal Resonator should be considered.
During a period of adaptation, minor healing symptoms may or may not occur as the stress level in the home is gradually lowered. Some people will have minor symptoms such as dizziness or fatigue. The System includes three levels of EMF protection to build up to the maximum of a scalar ground slowly so as to avoid or minimize possible uncomfortable detoxification symptoms.
The Scalar Home Protection System utilizes the principles of cyclotronic resonance and Scalar Resonance Technology. EarthCalm products never need recharging and are offered with a 90 day money back guarantee to afford you the time to monitor the effectiveness yourself. Note and jot down your specific symptoms now as well as those of your family, and then compare them after using our Scalar Home Protection System for several weeks to determine their effectiveness for yourself.
Contains 14 circuits.
Specifications: Measures: 4” x 2” x 2”. May be plugged into any 3 hole (or two hole with plug adapter) outlet anywhere in the home to protect an entire house. For 220 voltage order the worldwide version which is slightly smaller in size.
"Returns: When returning this product it must be accompanied with all its packaging and related paperwork to receive a refund"
Remember to select the Shipping option 'Free Shipping' in the checkout area or you will not receive Free Shipping for this product. |
298.00 |
View |
|
RAD Free 7 Headset
This unit is currently out of stock and on backorder
HOW IT WORKS: The RadFree 7 Headset is the world's first cellular headset to be developed using AirTube™ Technology. This technology utilizes a state-of-the-art SPL enhanced sound chamber which delivers crystal clear sound through an air-filled WIRELESS tube (similar to a doctor's stethoscope). By replacing the wire with AirTube™ Technology, the RadFree 7 Headset reduces the possibility of radiation reaching your head.
DURABILITY & DESIGN The RadFree 7 Headset incorporates some of the most durable electronic components on the market today. Sleek and sophisticated in design, the RadFree 7 Headset is the new standard by which all headsets are measured.
BETTER SAFE TODAY - THAN SORRY TOMORROW As cellular phone use increases throughout the world so do concerns about the potential effects of RF Energy. The RadFree 7 headset was developed with these issues in mind. Our goal is to provide Smart Cellular Solutions for cell phone users worldwide.
RF ENERGY FREE!
Crystal Clear Sound
Complies with Hands-Free Driving Regulations
3G Next Generation Cellular Headset
Tested by NTS Laboratories
Custom Molded Lightweight
Ear Piece Fits Left or Right Ear
RF7 Lightweight AirTube™ Sound Delivery Tube
State-of-the-art sound chamber with enhanced SPL technology and fully integrated microphone for crystal clear hands-free communication
FACT: Cellular phones emit RF Energy
FACT: RF Energy is not risk free
FACT: Conventional headsets use wire to deliver sound to the earpiece which may also deliver RF Energy directly to your head.
SOLUTION: RadFree 7 Headset |
32.95 |
View |
|
Microwave Leakage Detector
For a fast, easy check of leakage from microwave ovens. Large dial with needle gauge clearly distinguishes ?Safe? from ?Danger?. Just move the meter around the oven door seal while the oven is operating. Designed for use at 2.4 GHz (normal microwave oven), but may have wider (uncharacterized) frequency response. No batteries required. |
9.95 |
View |
|
|
Monitor 4 Metric: Radiation Monitor
No ghost hunting equipment toolbox would be complete without an
affordable geiger counter! Features easy to read analog meter, red
light count, anti-saturation circuitry, and audible indicator- all in
hand-held convenience. Uses a halogen quenched uncompensated Geiger
Mueller tube with a thin mica window. Detects alpha down to 2.5 MeV,
80+% efficiency at 3.6 MeV. Detects beta at 50 keV with 35% efficiency,
and 150 keV with 75% efficiency. Detects gamma and X-ray down to 10
keV. Range of 0.02 - 50 mR/hr. Includes 9V battery. 1-year warrantee.
Made in USA.
Now available with metric calibration. Readout in microSieverts/hour. |
295.00 |
View |
|
|
Hall-effect Gaussmeter Axial & Transverse
High linearity and high accuracy (3%) from 0-10 Hz.
4 ranges: 2, 20, 200, 2000 Gauss. 3? digit display, yields 1 mG
resolution (on lowest scale). 200 mV recorder output. Includes a 9V
battery plus AC adapter. Versatile enough to classify magnets, measure
residual magnetism, and check fields from DC circuits. Made in USA. 2
year mfr warranty.
|
650.00 |
View |
|
|
Bandpass AC Gaussmeter 60Hz
Low cost, portable, single axis home model
with large, easy-to-read 3? digit display. What makes this meter unique
is the very narrow bandpass filter which only allows the calibration
frequency to be read. Gives very accurate readings without distortion
from harmonics.
Range: 0.1 - 199.9 milliGauss
4% Error Guarantee based on EPA report
Bandwidth: 11 Hz @ 3dB
Deluxe carry case and 9V battery included
1 Years Parts & Labor warranty, Made in USA
|
199.00 |
View |
|
Linear Hall Eeffect Sensor
These semiconductor chips are the heart of a DC magnetometer probe. When a DC magnetic field is applied, a voltage is produce which is proportional to the strength of the field. They also be used to make a very simple DC magnetometer… schematic included! It is possible to position 3 units orthogonally and link them in series to make a “3-axis” DC magnetic field sensor.
The Hall-effect integrated circuit included in each device includes a Hall sensing element, a linear amplifier, and a CMOS Class A output structure. Integrating the Hall sensing element and the amplifier on a single chip minimizes many of the problems normally associated with low voltage level analog signals.
High precision in output levels is obtained by internal gain and offset trim adjustments made during the manufacturing process.
These features make Linear Hall Effect Sensor ideal for use in position sensing systems, for both linear target motion and rotational target motion. They are well suited for industrial, hobby and educational applications over extended temperature ranges, from -40°C to 125°C.
A 3-pin ultramini SIP for through-hole mount. Lead (Pb) free, with 100% matte tin plated leadframe. These devices have a quiescent output voltage that is 50% of the supply voltage. Operating Voltage: 4.5 - 6 V. Typical Sensitivity: 1.3 mV/G |
2.00 |
View |
|
Nuclear Watch
Works like a smoke detector to alert you when radioactivity levels rise. Hang it on a wall or use it in battery mode as a hand held portable device. Detects Alpha, Beta, and Gamma. Features digital readout of radiation level, sequential LEDs rotate faster as radiation levels increase, and preset audible alarm. Extremely easy to use. Has a test button just like a smoke detector. Great for home or office use, but also suitable for industrial, educational, and military applications. Includes AC-9V adapter. 1 year warranty. |
199.95 |
View |
|
UV/B Sunburn Meter
Here’s a user-friendly UV intensity meter which gives a lot of information. Designed specifically to measure UVB, the skin burning rays:
UVB Index display (0-100)
Allowable time of safe exposure to the sun
Time of sunburn protection (Alarm Beeper)
Ambient Temperature display (°F/°C Interchangeable)
Time display
Operating temperature: 0 to 50 °C
Dimensions : 67mm(L) x 45.5mm(W) x 15.7mmH)
Battery: 1pc x Lithium CR2032
Great for vacations, school projects, sports, outdoor work. Nice gift too! |
29.95 |
View |
|
Mini-Infrared Thermometer
You will not believe how much is packed into this little meter:
Very small size, fits in your palm
Remote IR Thermometer with 6:1 spot ratio, 0.95 fixed emissivity, laser pointer
Ambient (local) temperature measurement also (compare local and remote temperatures)
Back light, great for working in dark locations
°C/ °F display selection
Hold function
Over range indication: "OL" or "- OL"
Auto power off: 20 seconds, prolongs battery life
Low battery indication
Measurement range:
IR: -20°C ~ 270°C (- 4°F ~ 518°F)
Ambient: 0°C ~ 50°C
Resolution: 1°C
And a great price too! Get one for your toolbox. |
49.95 |
View |
|
AC/DC Clamp Meter
Place the jaws of this clamp meter around wires, pipes, conduit, hoses, or any other object (up to 42mm diameter) to determine if magnetic field producing electric current is flowing. It’s the easiest way to check your water main, radiator pipes, and wires without disconnecting them. Net current and many wiring errors can be detected when the current in the hot lead does not equal the current in the neutral… or worse, if there is current running on the ground wire. This is a “must have” tool for EMF consultants and other EMF detectives.
This unit also has many other very useful features:
True RMS for AC voltage and current
Auto/manual range
Data hold
MAX / MIN function
AC/DC voltage, AC/DC current, resistance, frequency
Continuity test
Diode test
More specifications:
Conforms to the IEC1010-1 & IEC1010-2-032 standard
Display : 3999 counts and 42 segment bar graph
True RMS for AC voltage and current
Auto zero key for DCA
Back light and Jaw light
Auto power off
DC Voltage: 4 / 40 / 400V ±0.8%, 1000V ±1.0%
AC Voltage: 4 / 40 / 400V ±1.0%, 700V ± 1.2%
DC Current: 400 / 1000A ±3.0%
AC Current: 400 / 1000A (<600A ±2.5%, 600A ±3.0%)
Resistance: 400 / 4k / 40K / 400k / 4M ±1.0%, 40M ±2.0%
Frequency: 40Hz ~ 100KHz ±0.1%
Frequency range from current clamp: 40Hz ~ 400Hz ±0.1%
Size: 225 x 86 x 33mm; Weight: Approx.320g
|
89.95 |
View |
|
Electrosmog Detector
A new, inexpensive hand-held device available to the consumer which can detect the pulsing emissions from wireless communications technologies (mobile phones, masts, DECT digital cordless phones, w/LAN’s, Wi-Fi, etc.) which are considered by scientists to be the cause of health effects among a significant minority of the population.
The Electrosmog Detector enables you to judge the relative levels of such pollution by listening to both the volume and quality of the sound. GSM, 3G, wLANS, DECT digital cordless phones etc all sound different and after a little practice are easy to identify.
The Electrosmog Detector enables you to ‘hear’ the electrosmog that exists all around you. The level and quality of the sound emitted is directly related to the type and intensity of man-made microwave radiation.
It is not an alarm, nor is it a warning device. It is an educational tool providing an awareness of your personal environment. Curved design fits comfortably in the hand and requires no technical knowledge to operate. The Electrosmog Detector is the first true consumer product in this category.
In a world where fast-growing wireless technology is ever-present, the Electrosmog Detector allows you to hear the digital pulsing of microwave frequency signals. These could be from
Digital cordless DECT phones
Mobile phones
Computer wireless networks
Bluetooth UMTS
Mobile phone masts and base stations
Baby alarms
Microwave technology
Detect the electrosmog ‘hotspots’ in your environment and protect your family anywhere that you spend time - at home, in offices, schools, libraries, hotels, restaurants and when travelling.
Has a built-in speaker, 2.5 mm mono headset jack for private operation (headset not included) and 2 year warranty. Uses 9V battery (included). Patented.
Frequency Range: 50 MHz to 3000 MHz
Sensitivity: 0.01 volts per meter (V/m)
Output: Audio Loudspeaker, Audio jack socket
Controls: On/Off Switch, Volume
|
89.95 |
View |
|
Digital Local/Remote Thermometer
What a perfect paranormal research tool. Very handy when mounted to a suitable staff (stick, pole, wand) for surveying temperature variations within a room. Put the meter body near the handle end and mount the remote sensor at the tip of the staff (up to 6 feet away!).
Simple-to-use and lightweight digital thermometer will measure the air temperature at 2 locations and displays both readings simultaneously. It’s one thing to find a warm or cold spot. It’s quite another to find a warm or cold spot that is different from the ambient surroundings!
Meter has one internal sensor at the location of the display, and another remote sensor on a 6 foot cable. High resolution. Includes memory for min/max values, alert/set button to enter a preset value for local/remote temperature, temperature readout in °C or °F.
Specifications:
temperature range
local: -10°C to +50°C (+14°F to +122°F)
remote: -50°C to +70°C (-58°F to +158°F)
resolution: 0.1°C (0.1°F)
sensor wire length: 1.8m
digit height: 12mm (0.5"); display size: 30 x 40mm (1.18" x 1.57")
unit size: 110 x 70 x 20mm (4.3" x 2.75" x 0.78")
power supply: 1 x 1.5 V AAA battery (LR3C) (incl.)
Also great for checking indoor and outdoor temperature at home or office. Can be wall mounted or hand held. |
9.95 |
View |
|
Economy DMM with PC Interface
High sensitivity DMM with all the multiple functions you need including data hold, backlight, frequency, AC/DC voltage to 1 mV. Perfect for logging data to your PC from magnetic field and other probes. Economy DMM Image 2
Software is easy to use, nice graphics, and very intuitive. Includes K-type thermocouple, Software CD, non-optically isolated RS232 cable, carry case. 3? LCD display with automatic polarity indication. Includes the all important 0 - 4000 mV AC range so it can be used with the Body Voltage Sensor, and all magnetic field probes listed.
Features:
38-segment bargraph
Automatic or manual range selection
Data-hold function
Continuity test
RS232C standard interface for PC connection
Backlight
ACV (max. 750V) and DCV (max. 1000V) measurements
DCA and ACA current measurements: max. 10A
Resistance measurements: up to 40MOhm
Capacitance measurements: up to 400nF
Temperature measurements: 0°C to 750°C
hFE-test: 1 to 1000
Diode test
Specifications:
DC voltage: 4/40/400/1000V
- basic accuracy: ±0.5% (±0.8% for 1000V range)
- input impedance: 10MOhm
- maximum input: 1000V
AC voltage: 4/40/400/750V
- basic accuracy: ±1.2% (±1.5% for 750V range)
- input impedance: 10MOhm
- frequency range: 40-400Hz
- maximum input: 750V
DC current: 4m/400m/10A
- basic accuracy: ±1.2% (±2.0% for 10A range)
- overload protection: 15A/250V-fuse (for 10A-range)
AC current: 4m/400m/10A
- basic accuracy: ±1.5% (±3.0% for 10A range)
- overload protection: 15A/250V-fuse (for 10A-range)
Resistance: 400/4k/40k/400k/4M/40M
- basic accuracy: ±1.2% (±3.0% for 40M range)
- overload protection: 250V DC or 250V rms
capacitance: 4n/400nF
- accuracy: ±4.0%
Temperature: 0° to 400°C / 400°C to 750°C
- basic accuracy: ±3.0%
Overrange: yes "OL"
Continuity buzzer: yes
Transistor test: yes
Diode test: yes
Low-battery indication: yes
Maximum display: 3¾ + bargraph
Ranging mode: auto / manual
Data hold: yes
Backlight: yes
Dimensions: 3.1" x 7.3" x 1.4"
Weight (with battery): ± 10.6oz
Power supply: 9V battery |
99.95 |
View |
|
20 dB Attenuator
Is the High Frequency Meter too sensitive for your application? This Attenuator reduces sensitivity by a factor of 100 so you can measure stronger signals. Changes sensitivity range from 0,1-1999 ?W/m? to 10-199,900 ?W/m? (equivalent to 0.001-19.99 ?W/cm?). Need to go still higher? Stack as many as you like to achieve the desired range. Designed specifically for the High Frequency Meters. Inserts between antenna and meter body. |
99.95 |
View |
|
Y-Shield liquid 1 litre
Easy to apply water-based paint for walls, ceilings, doors and other interior surfaces. Very effective for blocking cell phone signals, CB, TV, AM, FM signals, radiofrequency radiation and microwaves. Tested highly effective up to 18 GHz!
Guarantee absolutely free of toxic solvents and additives and completely carbon-based to avoid corrosion or oxidizing metal particles over time.
Simply mix with water, and it’s ready to use. Easy to handle – brush, roll, or spray similar to ordinary wall paint - and still achieve an amazing reduction of 99,99% of HF-Radiation with only one layer. Dries quickly. Water clean-up.
Due to its holohedral carbon structure, without fibers or meshes, it offers consistent attenuation regardless of the direction of signal polarization, and a highly conductive surface.
Supplied as a frost resistant powder. Long shelf life. Less weight for lower shipping cost. Safe for air or ground shipping any time of year.
Cover with latex paint, wallpaper, etc. to achieve desired aesthetics
Restricted water resistance: do not use in humid environments or for exterior applications
Color: black
Attenuation: typically 40 dB per layer
Minimum application temperature: +1°C / 33.8°F
Powder makes 1 liter (1.057 US quart) of liquid paint
Weight: 0.6 kg (~ 1.3 lb)
Typical coverage: 75 ft˛ (~ 7 m˛)
Shelf Life: 2 years, if stored cool and dry; prepared paint has to be used within 48 hours
Requires grounding like any other RF shielding material. For interior application only. Appropriate for home, industry, research, and educational applications.
Y-Shield ?............... $89.95/liter |
89.95 |
View |
|
Ground Stake Kit 25ft
If you don?t like the idea of grounding your shielding paint, fabric or plastic through your building?s electrical system, you can use this simple and durable grounding stake to connect directly to the Earth. Sturdy, rust resistant, 36 inch long aluminum stake is ready to drive into the soil. Complete with exterior grade heavy gauge ground cord (with no terminal) and stake-to-cord connector.
Note: if soil is rocky, you may need to dig a hole first with appropriate tools. Be careful when selecting location? do not place near buried wires or pipes. |
19.95 |
View |
|
|
Ground Stake Kit 50ft
If you don?t like the idea of grounding your shielding paint, fabric or plastic through your building?s electrical system, you can use this simple and durable grounding stake to connect directly to the Earth. Sturdy, rust resistant, 36 inch long aluminum stake is ready to drive into the soil. Complete with exterior grade heavy gauge ground cord (with no terminal) and stake-to-cord connector.
Note: if soil is rocky, you may need to dig a hole first with appropriate tools. Be careful when selecting location? do not place near buried wires or pipes. |
29.95 |
View |
|
|
Ground Stake Kit 100ft
If you don?t like the idea of grounding your shielding paint, fabric or plastic through your building?s electrical system, you can use this simple and durable grounding stake to connect directly to the Earth. Sturdy, rust resistant, 36 inch long aluminum stake is ready to drive into the soil. Complete with exterior grade heavy gauge ground cord (with no terminal) and stake-to-cord connector.
Note: if soil is rocky, you may need to dig a hole first with appropriate tools. Be careful when selecting location? do not place near buried wires or pipes. |
39.95 |
View |
|
Velostat Film
It's plain black, shiny and big! Velostat is a very low cost, extra-wide conductive sheet for electric field shielding. Carbon impregnated black polyethylene film. Normal 4 mil or heavy duty 8 mil thick so it's really tough and 36" wide to cover large projects. Volume resistivity is |
1.95 |
View |
|
Wireless 4 Zone Thermometer
This is a great item when you want to monitor the air temperature at up to 4 different locations simultaneously. Base station is one locat ion, and you get 3 remote sensors which you can place up to 80 feet away* . Unit displays time, temperature at base station, and one of the remote sensors.One button toggles display of all three remote sensors. Updates quickly. Displays in °F or °C and will record MIN and MAX. Actual Size: 5.1" x 2.47" x 1", base can be wall of desk mounted.
Base uses 2 "AAA" alkaline batteries, each sensor uses 2 “AA” alkaline batteries.
Weather Resistant Case.
· Sensor Temperature Range: -21.8°F to + 156.2°F
· Base Temperature Range: 32°F to 140°F
· Temperature Accuracy: + / - 1.5°F
· Transmission Frequency: 433.92 MHz
* The maximum transmission range is 80 feet in a straight line (line of sight) . Walls and obstructions can reduce transmission range by as much as 25-30 feet . |
69.95 |
View |
|
ZONE030
ZONE030, “the equalization foil”, is a new high-tech product, able to reduce ELF magnetic fields in the vicinity of a mobile phone.
Some studies* have shown that adverse biological effects from cell phone radiation may have more to do with the ELF magnetic fields they emit than the microwaves themselves.
ZONE030 creates a phenomenon known as Spatial Magnet ic Field Equalization. Simply said, it smoothes out the hotspots, distributing the energy over a wider area. The net result is much less concent rated magnetic field exposure for the cell phone user’s head.
Ease of use! Simply peel the backing off the ZONE030 foil and stick it on your mobile phone - inside the back cover or on the battery. The foil is 28mm X 30mm and can be trimmed with a scissors. The ZONE030 foil does not affect the cellphone's performance.
Carries CE Mark.
* For example: Indoor Built Environ 2001; 10: 291–298 |
21.90 |
View |
|
Banana to Alligator Cord
You get 3 cords (one each: red, black, and yellow) with banana plugs on one end and alligator clips on the other. Use them as ground cords, in meters, test equipment, etc. They measure 36" in length |
2.79 |
View |
|
AegisGuard LL Radiation Shields (2 lbs)
Up To 99.998% Shielding Effectiveness
Safe For All Hand & Machine Washed Fabrics
Add To Final Rinse (do not pour directly on fabrics)
Use With Or Without Fabric Softener
Hypoallergenic & Fragrance Free
Will Not Affect Sensitive Skin
Made in USA
User instructions are included in each package or they can be downloaded by clicking here.
We are all involuntarily exposed to airborne radiation generated by power lines, electronic products, wiring in the home and office, wireless phones, and cell phone mast antennas. This radiation penetrates clothing and is absorbed by our body organs.
Respected scientists and others involved with the wired and wireless product radiation controversy believe the widespread use of these products represents the largest epidemiological experiment in history using unwilling test subjects. It is important to understand that no regulatory agency or scientist has ever stated, without caveats, that these emissions are safe.
Part of the AegisGuard? L (Life) Series family of products, AegisGuard? LL Radiation Shields provide a safe, patented and proven radiation shielding solution for all hand and machine washable fabrics. Simply add to the final rinse water, with or without fabric softener, for the most effective solution available for shielding up to 99.998% of the airborne radiation emitted by wired and wireless electronic products with operating frequencies between 5 Hz. to 15 GHz. and power levels between 1 milliwatt (0.001 Watt) to 25 Watts. There has never been an allergic or skin reaction reported by any user.
Consisting of a proprietary technology offering greater shielding effectiveness than any other personal radiation shielding product, garments rinsed with AegisGuard? LL Radiation Shields protect the body covered by the fabric from both high and low frequency radiation, making it an excellent and cost effective shielding solution for individuals suffering from electrosensitivity. The low frequency shielding effectiveness is an important distinction due to the increased number of studies confirming low frequency health risks, particularly for children.
40 different garments were tested for 24 hours each by 3 independent testing laboratories to confirm the shielding effectiveness remained consistent for a full day. The shielding effectiveness exceeds the requirements specified by MIL-STD-285, IEEE 299 and Human RF exposure limits as set forth in FCC OET Bulletin 65.
A 6 month field test consisting of 100 participants was also conducted prior to announcing AegisGuard? LL Radiation Shields to test product performance and to ensure allergic or skin reactions did not occur. 18 of the participants claimed to suffer from the effects of electrosensitivity and 16 reported significant relief after using the product. There were no allergic or skin reactions reported by the participants or by any user since the product was announced in June, 2006.
Like all other AegisGuard? Radiation Shields, AegisGuard? LL Radiation Shields deflect radiation away from the user instead of absorbing it (for wireless products such as cell phones, the World Health Organization does not recommend the use of shielding products claiming to absorb radiation). Since radiation is deflected rather than absorbed, the saturation and seepage that normally occurs within a few minutes when using an absorption type shield does not occur. |
84.95 |
View |
|
|
AegisGuard LL Radiation Shields (4 lbs)
Up To 99.998% Shielding Effectiveness
Safe For All Hand & Machine Washed Fabrics
Add To Final Rinse (do not pour directly on fabrics)
Use With Or Without Fabric Softener
Hypoallergenic & Fragrance Free
Will Not Affect Sensitive Skin
Made in USA
User instructions are included in each package or they can be downloaded by clicking here.
We are all involuntarily exposed to airborne radiation generated by power lines, electronic products, wiring in the home and office, wireless phones, and cell phone mast antennas. This radiation penetrates clothing and is absorbed by our body organs.
Respected scientists and others involved with the wired and wireless product radiation controversy believe the widespread use of these products represents the largest epidemiological experiment in history using unwilling test subjects. It is important to understand that no regulatory agency or scientist has ever stated, without caveats, that these emissions are safe.
Part of the AegisGuard? L (Life) Series family of products, AegisGuard? LL Radiation Shields provide a safe, patented and proven radiation shielding solution for all hand and machine washable fabrics. Simply add to the final rinse water, with or without fabric softener, for the most effective solution available for shielding up to 99.998% of the airborne radiation emitted by wired and wireless electronic products with operating frequencies between 5 Hz. to 15 GHz. and power levels between 1 milliwatt (0.001 Watt) to 25 Watts. There has never been an allergic or skin reaction reported by any user.
Consisting of a proprietary technology offering greater shielding effectiveness than any other personal radiation shielding product, garments rinsed with AegisGuard? LL Radiation Shields protect the body covered by the fabric from both high and low frequency radiation, making it an excellent and cost effective shielding solution for individuals suffering from electrosensitivity. The low frequency shielding effectiveness is an important distinction due to the increased number of studies confirming low frequency health risks, particularly for children.
40 different garments were tested for 24 hours each by 3 independent testing laboratories to confirm the shielding effectiveness remained consistent for a full day. The shielding effectiveness exceeds the requirements specified by MIL-STD-285, IEEE 299 and Human RF exposure limits as set forth in FCC OET Bulletin 65.
A 6 month field test consisting of 100 participants was also conducted prior to announcing AegisGuard? LL Radiation Shields to test product performance and to ensure allergic or skin reactions did not occur. 18 of the participants claimed to suffer from the effects of electrosensitivity and 16 reported significant relief after using the product. There were no allergic or skin reactions reported by the participants or by any user since the product was announced in June, 2006.
Like all other AegisGuard? Radiation Shields, AegisGuard? LL Radiation Shields deflect radiation away from the user instead of absorbing it (for wireless products such as cell phones, the World Health Organization does not recommend the use of shielding products claiming to absorb radiation). Since radiation is deflected rather than absorbed, the saturation and seepage that normally occurs within a few minutes when using an absorption type shield does not occur. |
157.95 |
View |
|
|
AegisGuard LL Radiation Shields (8 lbs)
Up To 99.998% Shielding Effectiveness
Safe For All Hand & Machine Washed Fabrics
Add To Final Rinse (do not pour directly on fabrics)
Use With Or Without Fabric Softener
Hypoallergenic & Fragrance Free
Will Not Affect Sensitive Skin
Made in USA
User instructions are included in each package or they can be downloaded by clicking here.
We are all involuntarily exposed to airborne radiation generated by power lines, electronic products, wiring in the home and office, wireless phones, and cell phone mast antennas. This radiation penetrates clothing and is absorbed by our body organs.
Respected scientists and others involved with the wired and wireless product radiation controversy believe the widespread use of these products represents the largest epidemiological experiment in history using unwilling test subjects. It is important to understand that no regulatory agency or scientist has ever stated, without caveats, that these emissions are safe.
Part of the AegisGuard? L (Life) Series family of products, AegisGuard? LL Radiation Shields provide a safe, patented and proven radiation shielding solution for all hand and machine washable fabrics. Simply add to the final rinse water, with or without fabric softener, for the most effective solution available for shielding up to 99.998% of the airborne radiation emitted by wired and wireless electronic products with operating frequencies between 5 Hz. to 15 GHz. and power levels between 1 milliwatt (0.001 Watt) to 25 Watts. There has never been an allergic or skin reaction reported by any user.
Consisting of a proprietary technology offering greater shielding effectiveness than any other personal radiation shielding product, garments rinsed with AegisGuard? LL Radiation Shields protect the body covered by the fabric from both high and low frequency radiation, making it an excellent and cost effective shielding solution for individuals suffering from electrosensitivity. The low frequency shielding effectiveness is an important distinction due to the increased number of studies confirming low frequency health risks, particularly for children.
40 different garments were tested for 24 hours each by 3 independent testing laboratories to confirm the shielding effectiveness remained consistent for a full day. The shielding effectiveness exceeds the requirements specified by MIL-STD-285, IEEE 299 and Human RF exposure limits as set forth in FCC OET Bulletin 65.
A 6 month field test consisting of 100 participants was also conducted prior to announcing AegisGuard? LL Radiation Shields to test product performance and to ensure allergic or skin reactions did not occur. 18 of the participants claimed to suffer from the effects of electrosensitivity and 16 reported significant relief after using the product. There were no allergic or skin reactions reported by the participants or by any user since the product was announced in June, 2006.
Like all other AegisGuard? Radiation Shields, AegisGuard? LL Radiation Shields deflect radiation away from the user instead of absorbing it (for wireless products such as cell phones, the World Health Organization does not recommend the use of shielding products claiming to absorb radiation). Since radiation is deflected rather than absorbed, the saturation and seepage that normally occurs within a few minutes when using an absorption type shield does not occur. |
287.95 |
View |
|
|
AegisGuard LL Radiation Shields (16 lbs)
Up To 99.998% Shielding Effectiveness
Safe For All Hand & Machine Washed Fabrics
Add To Final Rinse (do not pour directly on fabrics)
Use With Or Without Fabric Softener
Hypoallergenic & Fragrance Free
Will Not Affect Sensitive Skin
Made in USA
User instructions are included in each package or they can be downloaded by clicking here.
We are all involuntarily exposed to airborne radiation generated by power lines, electronic products, wiring in the home and office, wireless phones, and cell phone mast antennas. This radiation penetrates clothing and is absorbed by our body organs.
Respected scientists and others involved with the wired and wireless product radiation controversy believe the widespread use of these products represents the largest epidemiological experiment in history using unwilling test subjects. It is important to understand that no regulatory agency or scientist has ever stated, without caveats, that these emissions are safe.
Part of the AegisGuard? L (Life) Series family of products, AegisGuard? LL Radiation Shields provide a safe, patented and proven radiation shielding solution for all hand and machine washable fabrics. Simply add to the final rinse water, with or without fabric softener, for the most effective solution available for shielding up to 99.998% of the airborne radiation emitted by wired and wireless electronic products with operating frequencies between 5 Hz. to 15 GHz. and power levels between 1 milliwatt (0.001 Watt) to 25 Watts. There has never been an allergic or skin reaction reported by any user.
Consisting of a proprietary technology offering greater shielding effectiveness than any other personal radiation shielding product, garments rinsed with AegisGuard? LL Radiation Shields protect the body covered by the fabric from both high and low frequency radiation, making it an excellent and cost effective shielding solution for individuals suffering from electrosensitivity. The low frequency shielding effectiveness is an important distinction due to the increased number of studies confirming low frequency health risks, particularly for children.
40 different garments were tested for 24 hours each by 3 independent testing laboratories to confirm the shielding effectiveness remained consistent for a full day. The shielding effectiveness exceeds the requirements specified by MIL-STD-285, IEEE 299 and Human RF exposure limits as set forth in FCC OET Bulletin 65.
A 6 month field test consisting of 100 participants was also conducted prior to announcing AegisGuard? LL Radiation Shields to test product performance and to ensure allergic or skin reactions did not occur. 18 of the participants claimed to suffer from the effects of electrosensitivity and 16 reported significant relief after using the product. There were no allergic or skin reactions reported by the participants or by any user since the product was announced in June, 2006.
Like all other AegisGuard? Radiation Shields, AegisGuard? LL Radiation Shields deflect radiation away from the user instead of absorbing it (for wireless products such as cell phones, the World Health Organization does not recommend the use of shielding products claiming to absorb radiation). Since radiation is deflected rather than absorbed, the saturation and seepage that normally occurs within a few minutes when using an absorption type shield does not occur. |
515.95 |
View |
|
RF Field Strength Analyzer - Enhanced
Need wider frequency range? The Enhanced RF Field Strength Analyzer covers the expanded frequency range of 100 kHz to 2.9 GHz!
This powerful tool has it all: frequency counter, spectrum display, and RF intensity. Scan the entire frequency range from 100 kHz all the way up to 2.9 GHz! Want to know if cell phones are operating in your area? Look at the frequency spectrum, then tune in to the 800 MHz or 1900 MHz band to track signal strength. Want to know how much radiation you are receiving from a broadcast tower? How well does your shielding work for different frequencies? What sort of RF noise are you getting from your computer? If you ever wanted to analyze the mixture of RF signals in your environment, this is the unit for you. Only 9" x 4", this battery operated unit is self contained and only 1.4 lbs. Has a built in speaker for audio monitoring of the signals. Simple on-screen menu selection of functions. Screen is back-lit and capable of spectrum, bargraph, and digital display. Includes detachable antenna for broadcast signals, (use an optional F to BNC adapter for measuring signals in co-axial cable) and even has RS-232 output with PC software and cable so you can load and manipulate data on your computer! One year mfr. warranty. |
2595.00 |
View |
|
Dual Banana/RCA Cable
36 inch long coaxial, dual banana plugs on one end, RCA plug on other. |
14.95 |
View |
|
Dual Banana/3.5 Cable
36 inch long coaxial, dual banana plugs on one end, 3.5 mm mono plug on other. |
14.95 |
View |
|
Smart Fieldmeter 18 GHz
Dynamic range: 0.8-800 V/m
Frequency range: 3 MHz-18 GHz
Ranges (V/m, full scale): 2, 20, 200, 600
Resolution (at range):
0.01 V/m (2 V/m and 20 V/m)
0.1 V/m (200 V/m)
1 V/m (600 V/m)
RF Electromagnetic field monitor combining the major features of professional quality equipment (compare to Narda and Holoday) with convenience and simplicity for users on a budget. Direct E-field readout in calibrated V/m with 4 ranges: 2 (min sensitivity is 0.2), 20, 200, and 600. Covers frequencies from 200 kHz – 3 GHz.
Multimode (Average, Peak and Pulse) operation allows monitoring of the sinusoidal or modulated fields by displaying the average or peak values. Portable lightweight design with long lasting battery and detachable isotropic probe offers convenience in the field. Or mount the probe on the included tripod and use it with/without remote output monitoring (200 mVDC into 1 MOhm, full scale) to facilitate datalogging, PC interface, or laboratory applications. |
4600.00 |
View |
|
PC Link Kit for Smart Fieldmeter
Provides Simple Connection Of Smart Fieldmeter To PC
This kit supports one Smart Fieldmeter unit and contains in one stylish metal box the isolating differential amplifier (with more than 120 dB AC decoupling) and DAQ module acquiring 120 samples/sec with RS232 PC output. Software for data streaming, recording and archiving is included. |
800.00 |
View |
|
EVP Listener
So far as we know EVP can only be heard by playing magnetic recordings. But how did they get there, especially since no one heard anything at the time the recording was made? The EVP Listener converts magnetic signals directly into their audible counterpart? allowing anyone to listen to magnetic signals as they occur. Of course, it can be very useful for tracing man-made EMF from wiring and appliances and because 50/60 Hz fields have distinctive and recognizable sounds, it is easy to distinguish them from less ordinary sources. Completely portable. Includes headset, sensor and amplifier. |
19.95 |
View |
|
Dual RF/IR Detector
Light beams, especially lasers, provide an excellent method for carrying audio intelligence and are not detectable by ordinary RF (radio frequency) detectors. For those who need either a very sensitive RF detector or an infrared (IR) detector this unique item allows you to search for sources of either RF or infrared transmissions.
With its bandwidth of 1 MHz to 2500 MHz and its extra sensitive circuitry, it will pick up signals that other detectors may miss. It is designed to pick up subminiature radio and infrared transmitters wherever they are located - in your home, office or car. To change from RF to IR detection, simply use the convenient front panel switch.
Using the SENSITIVITY control and meter readings, you can quickly zero in on hidden RF and IR transmitters. Also use it to check your telephone and its associated wiring for RF bugs and taps. Can even be used to test your IR remote devices (TV remotes, etc.).
Weighing only 8 oz., it is furnished in a high-impact case that measures 5.3" x 3.3" x 1.5". The telescoping whip antenna can be extended 33". The unit comes complete with 9 volt battery, antenna and instructions. |
229.95 |
View |
|
XYZ Axis EMF Tester
This EMF tester is designed to provide user a quick, reliable and easy way to measure magnetic field levels around power lines, electrical appliances, wiring and industrial devices.
- One button scrolls through X, Y, and Z axis readings
- Covers bandwidths from 30 Hz to 300 Hz
- Wide measuring ranges (3 ranges of µTesla and 3 ranges of mGauss)
- Big digit LCD display
- Data hold button
- Simple to operate
- Easy to use remote probe, fits hard-to-reach spaces
Unit
Range
Resolution
Accuracy
µTesla
20
0.01
±(4% + 3d)
200
0.1
±(5% + 3d)
2000
1
±(10% + 5d)
mGauss
200
0.1
±(4% + 3d)
2000
1
±(5% + 3d)
20,000
10
±(10% + 5d)
Complete with 3ft (930mm) sensor cable, 9V battery, and hard carrying case. 1 year warranty. |
149.99 |
View |
|
Digital Hotspotter
The Digital Hotspotter provides information on signal availability and strength as well as essential network information, including ID, security status and channel for most 802.11 b/g Wi-Fi networks. Use it to determine if you are exposed to Wi-Fi radiation, the strength and direction of the source(s), and the number of channels.
Travelers, students and other roaming Wi-Fi users can use the Hotspotter to find available networks. Use the Hotspotter to determine where your home or office coverage extends, and where the optimal locations for use of the network are. Security The Hotspotter can be used to determine whether your home or office network is leaky. The device can detect whether your access point’s signal extends beyond your walls, and whether it is secured. The Hotspotter can also help you detect rogue access points.
The Hotspotter displays an image of one to four vertical bars, indicating the relative strength of the signals detected by the Hotspotter. By scanning repeatedly, you may be able to determine whether you are moving closer to or farther from a network access point by watching the increase or decrease in the relative signal strength.
The Hotspotter scans 13 channels. While only 11 channels are used in the US, 13 channels are used for Wi-Fi in Europe. Channel information can be useful in detecting potential reasons for interference. Most access points are set to channel 1, 6 or 11 by default. If you see more than one network on the same channel, it is likely that you may experience problems with interference. In fact, Wi-Fi channels overlap on adjacent channels, and may cause interference on adjacent channels. You may wish to use the Hotspotter when configuring your home or office network to determine what channels are least likely to experience interference.
LCD screen displays information about multiple networks:
Network ID (SSID)
Signal strength
Encryption status (WEP and WPA)
Provides Channel Information
Signal Availability (802.11b and 802.11g networks)
Product Specifications:
Dimensions: 2.52 L x 2.17 W x 1.06 H
Weight: 2.5 oz.
Compliance: FCC, CE Standards
Power: 2 Starter AAA Batteries Included
The device does not detect Bluetooth, 802.11a or 802.11n. Some 802.11b and g networks are not detected by the device. |
59.95 |
View |
|
Shielded Cellphone Holster
So you use a headset to reduce cellphone radiation to your brain. That?s good. But where can you put the phone? If you keep it on your belt clip, you are irradiating that part of the body. This fashionable holster has built-in high performance shielding material to reflect the phone?s radiation away from your hip area. Shielded only on one side, so it has no detrimental effect on the phone?s performance. Attach it to your belt, pocket, purse, brief case, seat belt, etc. |
49.95 |
View |
|
Remote Keyboard USB
Laptops are especially difficult to shield without adding a lot of bulk. Dramatically reduce EMF exposure to your laptop or PC by simply increasing the distance. This Windows compatible 104 key beige keyboard has the classic layout with number pad, all the function keys, scroll, etc. Best of all it connects easily through the USB port.
Note: This keyboard does not include mousepad. You can do most mouse functions with keyboard shortcuts, or you can always connect a normal mouse to your laptop. |
19.95 |
View |
|
Conductive Thread
66 Yarn 22+3ply 110 PET.
Resistance: |
61.95 |
View |
|
High Performance Silver Mesh Fabric
For maximum shielding perform-ance in a mesh fabric. Surface resistivity is 60dB from 30 MHz to 3 GHz!
Can be used over a wide range of temperatures (-30? to 90?C) to shield electronic components, make draperies, tents, garments, mobile phone shields, and more. Used in medical applications also. Good tear strength and attractive Silver color. Very soft and comfortable to touch.0.0045 inch thick, weighs only 40 grams/m?. 54" wide.
$16.95 per lin ft |
19.62 |
View |
|
Shieldit Super 15in
Want a high quality shielding fabric you can handle, make clothing from, or use around the house? Shieldit Super is the perfect choice. Based with a rugged plain weave nylon (for superior strength and handling), plated with Nickel and Copper (for excellent shielding, low corrosion, and low toxicity), then coated on one side with conductive acrylic (less than 0.1 Ohm/sq) plus a hot melt (203? - 338?F) adhesive with polyethylene barrier on the other side (for excellent moisture resistance, washability. You can even iron it on to cotton, wood, glass or paper, or roll it into a tube and then heat seal the seam!). Can also be cut and sewn like ordinary fabric.
Shieldit SuperThis fabric offers an amazing shielding performance: 80 dB (99.999999%) at 100 MHz; 100 dB (99.99999999%) at 1 GHz. Will also block virtually all ELF & VLF electric fields. Great for shielding extension cords and computer cables. Connect strips of it to make a sheet shield under your bed, or hang it on the wall. Makes a great liner for drapes too! Line a vest or a hat to shield your vital organs from radiowaves and electric fields. Because of the plastic coatings, it doesn't breathe well, and it may cause skin irritation, so plan to line it with cotton if you will be using it against the skin and handle it with gloves. Tear strength: 124 lbs (56.3 kg). Supplied 18" wide, gray. |
9.95 |
View |
|
Zelt Fabric - per linear ft
$10 charge to put on a roll, folded no extra
Here is a Tin/Copper coated plain weave nylon fabric that offers the best in shielding fabrics:
Excellent shielding (averaging 80 db from 30 MHz to 1 GHz)
High surface conductivity (less than 0.1 ohm/sq)
Great handling for cutting and sewing
Superb corrosion resistance
Non-irritating
Weight is only 72 g/m˛
Good value
Our most popular fabric. Use it in curtains, bedding, garments, wire sheathing, enclosures and more! Width is 51", color is metallic gray. |
23.95 |
View |
|
Nickel/Copper Fabric Tape
High conductivity, high flexibility fabric tape with conductive adhesive. Copper Fabric Tape Shielding Performance Nickel and Copper coated nylon ripstop fabric (with anti-fray) offers excellent RF shielding properties (82 dB at 1 MHz) and electrical conductivity (surface resistivity of less than 0.1 Ohms/sq). Use it so seal gaps, seams, and edges of shielding fabrics, paints or plastics. Also can be used to create conductive pathways on surfaces or add shielding to cables and flexible conduits. Cuts easily with scissors. Extremely corrosion and tear resistant, -40 to 212?F. Only 0.006 inch thick. 1 inch wide, 25 feet per roll.
$19.95 per roll |
19.95 |
View |
|
Hook & Loop Fastener
Similar to Velcro™ but conductive. One inch wide. Excellent holding power and RF shielding. Use it to create re-sealable flaps, tubes, and seams in shielding fabrics, plastics and foils. Will conduct along its length and across the gap. Silver coated. Can be sewn in or glued, no adhesive supplied. Very unique!
Expected cycle life: 5000 openings/closings
Shear strength: 12.3 psi (new) / 6.7 psi (after 5000 cycles)
Peel strength: 1.2 piw (new) / 0.8 piw (after 5000 cycles)
Weight: 0.15 oz/in²
Mated thickness: 1/8 in
Resistivity:
Hook: 1.8 Ohm per sq
Loop: 1.4 Ohm per sq
0.8 Ohm through mated closure
$15.29 per lin ft |
15.29 |
View |
|
E.L.F.-Zone Gaussmeter
What this meter lacks in resolution it makes up with ease of use and very low cost. Will measure ELF/VLF magnetic fields in the frequency range of 20 - 10,000 Hz, with a minimum sensitivity of .25 mG. Laboratory tested and documented for accuracy.
* Three LED lights signal field strength: 0 - 2.5 mG ("safe")
* 2.5 - 7 mG ("caution")
* 8 or more mG ("danger")
Single axis sensor, on/off toggle switch. One fresh 9V battery required. Useful for preliminary surveys of home, car, or office. Very popular for paranormal work too! |
12.95 |
View |
|
Budget Buzz Stick
Common ELF magnetic field frequencies are within the range of human hearing. This simple set up converts the AC magnetic signal directly into a dramatic corresponding sound signal. A 60 Hz powerline field sounds like a 60 Hz hum (a low note on piano keyboard). Harmonics can easily be heard, as well as clicks, static, and hash. LED displays are especially noisy. The strength of the field is proportional to loudness.
Unit includes a single axis probe on 2 foot cable and audio amplifier with adjustable volume. You can even use an optional earphone/headset for discreet operation. Use it to “sniff out” sources of interference, offending EMF, check shielding designs. Makes a great educational tool. Requires one 9V battery. |
16.94 |
View |
|
Geomagnetometer with Portable Oscilloscope
Geomagnetometer
Analyzing frequency information from ultra-low frequency magnetic fields can be extremely challenging. Air coil type magnetic field probes just don't have the necessary sensitivity below about 20 Hz.
The voltage output from our Geomagnetometer (read more) provides excellent frequency information from low frequency signals. The amplified, unrectified, Hall effect probe output retains all the frequency information from the magnetic field under investigation.
Simply connect the voltage output from the Geomagnetometer to the oscilloscope or spectrum analyzer and monitor both field strength AND waveform, frequency, and spectrum distribution of your signals. Because the Geomagnetometer output produces 200 mV at full scale, you get plenty of signal to the oscilloscope or spectrum analyzer.
For example, on the 0-2 mG range: 2 mG produces 200 mV output, .05 mG produces 5 mV. On the 0-200 mG range: 200 mG produces 200 mV output, 5 mG produces 5 mV.
In our tests, the actual output range from the Geomagnetomer extends significantly beyond 200 mV, and was useful up to 60 Hz and beyond. Interested in .01 Hz? 2 Hz? 7.8 Hz? No problem! You can analyze fluctuations in the Earth's magnetic field, fields from audio recordings, and almost any other ultra-low frequency magnetic field source. Possibly biologic and paranormal sources?
Portable Oscilloscope
Anyone familiar with the operation of an oscilloscope will appreciate the incredible low price and full features of the hand held oscilloscope. Connected to a probe (magnetic, electric or RF) you can measure voltage up to 80V AC or DC and check the waveform up to 2MHz. See spikes, RF noise, harmonics. Check for dirty power. Operates on 5 AA batteries, not included. BNC input. Extend the input range to 600V with x10 probe setting.
* Input Impedence: 1Mohm//20pF (standard probe)
* Timebase Range: 0.2 micro-s to 1 hour/div
* Sensitivity: 5mV/div to 20V/div (0.1 mV minimum sensitity) |
894.90 |
View |
|
Geomagnetometer with Spectrum Analyzer for PC
Geomagnetometer
Analyzing frequency information from ultra-low frequency magnetic fields can be extremely challenging. Air coil type magnetic field probes just don't have the necessary sensitivity below about 20 Hz.
The voltage output from our Geomagnetometer (read more) provides excellent frequency information from low frequency signals. The amplified, unrectified, Hall effect probe output retains all the frequency information from the magnetic field under investigation.
Simply connect the voltage output from the Geomagnetometer to the oscilloscope or spectrum analyzer and monitor both field strength AND waveform, frequency, and spectrum distribution of your signals. Because the Geomagnetometer output produces 200 mV at full scale, you get plenty of signal to the oscilloscope or spectrum analyzer.
For example, on the 0-2 mG range: 2 mG produces 200 mV output, .05 mG produces 5 mV. On the 0-200 mG range: 200 mG produces 200 mV output, 5 mG produces 5 mV.
In our tests, the actual output range from the Geomagnetomer extends significantly beyond 200 mV, and was useful up to 60 Hz and beyond. Interested in .01 Hz? 2 Hz? 7.8 Hz? No problem! You can analyze fluctuations in the Earth's magnetic field, fields from audio recordings, and almost any other ultra-low frequency magnetic field source. Possibly biologic and paranormal sources?
Oscilloscope Spectrum Analyzer
Fantastically simple way to get frequency (and field strength) information from your EMF probes and meters with ACV output. Using your computer and monitor to display, all standard oscilloscope and spectrum analyzer functions are available through the Windows based software supplied. 2-channel capability, so you can connect 1 device or 2 devices simultaneously.
* Look for harmonics or high frequency noise in powerlines
* See waveform
* Monitor spikes, surges, brownouts
* Compare Electric field to Magnetic field, or to temperature, sound, light or other parameters with appropriate probes
* Great for audio and automotive applications too
Connects to the computer’s parallel printer port. |
1259.90 |
View |
|
Data Logging DMM with PC Interface
Amazing low price on this versatile digital multimeter! You can use it as a stand alone or connect it to your PC with the built in RS-232C serial interface to collect and analyze long term data on AC/DC voltage (0.01mV -1000V), AC/DC current, Resistance, Frequency (0.001 Hz - 125kHz), Capacitance and Diode test! With optional magnetic field probes or electric field and body voltage sensors, measure electric and magnetic field strength and frequency over time. Can also be used with Geomagnetometer or DC Gaussmeter to measure permanent magnets. Includes optically isolated RS232 cable and powerful Windows based software which allows users to determine sampling rate, set HI/LO audible alarms, display data in digital, analog, and graphic formats. Requires only 4MB of computer memory. 3-year mfr. warrantee.
* 10 selectable datalogging sample rates from 0.05 second (50ms) to 480 seconds (8 minutes) per sample for high speed data collection or long time studies
* View stored data directly on LCD display with quick min/max and trend displays
* Optically isolated RS-232 PC interface with Windows® 95/98/NT/2000/ME/XP compatible software (included) allows user to collect, display, plot, save or export data or graphs
* Rugged design with protective holster and water resistant housing
* High basic DC Voltage accuracy of 0.08%
* True RMS measurements for AC Voltage and Current
* Wide AC Voltage bandwidth of 40Hz to 20 kHz
* Smart auto power off is disabled if signal is present at test leads
* Temperature function with selectable şF/şC units
* Backlit 5000 count LCD display for high resolution (0.01mV, 0.1µA, 0.01 Ohm, 0.01nF, 0.001 Hz)
* Hold and low resistance auto-lead zero
* 10 measurement functions including AC/DC Voltage and Current, Resistance, Temperature, Frequency, Capacitance, Diode and Continuity
* Complete system includes multimeter with built-in stand, CAT III test leads, Temperature probe, software, RS-232 cable, protective holster and 9V battery |
309.99 |
View |
|
4-Channel Data Logger
Features
record DC signals or slow-moving signals over very long periods
the measurements are automatically stored on your hard disk for further processing
thanks to the USB connection no power supply is necessary and installation is easy and straightforward
signals are instantly displayed on the PC screen using an analogue or DVM display
USB cable included
PC-LAB2000 Software included
Specifications
hardware:
USB connected and powered
four DC-coupled input channels
input resistance: 1Mohm
maximum samples per second: 100
four input ranges: 3V / 6V / 15V & 30V
sensitivity: 10mV (you can add a low cost Audio Amplifier per channel to boost weak signals)
accuracy: ±3% of full scale
maximum input: 30Vdc
power and recording/diagnostic LED
software:
analog trace or digital readout
4 channels record simultaneously
min/max sample hold function
from 1 sec to 1000 sec per division
storage & recall of color screens or data
automatic recording option for long recordings
on screen markers for time and voltage
DLL included for your own developments
system requirements:
PC, running Win98SE or higher (does not work on WinNT or Win95)
free USB port
mouse
CD-ROM player
|
99.95 |
View |
|
|
High Frequency Meter, Extended Range
We like this calibrated wideband (800 MHz ? 2.5 GHz) RF meter because
it has a switch which allows a choice of peak or average indication
mode. This permits accurate measurement of both digital and analog
signals. Two ranges:
1 - 1999 µW/m˛ (same as 0.1 – 199.9 nW/cm˛) and 0.1 - 199.9 µW/m˛ (same as 0.01 – 19.99 nW/cm˛).
In addition, you get a choice of audio tone ?
none, or intensity proportional to field strength, or proportional to
frequency (for analyzing pulsed signals)
- accuracy ±6 dB
- true logarithmic - periodic antenna, 27 MHz - 3.3 GHz, single polarized, included
- standard 9V battery included
Easily
detects cell phone towers, cordless phones even microwave oven leaks.
Instructions in German and English. 2 year Warranty.
|
956.00 |
| |
